Guangming Public Service Regjeringskontorbygning by Zhubo Design Co., Ltd.

Guangming Public Service Regjeringskontorbygning by Zhubo Design Co., Ltd. is a highly esteemed winner of the very prestigious 2021 A' Design Award i Platina in Arkitektur-, bygnings- og strukturdesign Competition Category.

PlatinaArkitektur· 2021

Guangming Public Service Regjeringskontorbygning

by Zhubo Design Co., Ltd.

Client: Zhubo Design

A' Design Award i Platina Winner in Arkitektur Category

226,329

Verified Award Winner

Verify Award Status for #110344

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Guangming Public Service Regjeringskontorbygning

Guangming Public Service er en offentlig kontor- og servicebygning i Shenzhen, Kina. Bygningen er delt inn i to blokker med distinkte former. Det øvre rektangulære volumet inneholder kontorer, mens den nedre blokken rommer en offentlig servicehall med et bølgende tak formet som en fjellkjede. To små åser på tomten er bevart, noe som reduserer utgravning og forlenger det omkringliggende grønne landskapet. Planen unngår den lukkede utformingen som er vanlig i kinesiske regjeringsbygninger. Designet følger en grønn utviklingsmodell med lav påvirkning.

The Recognition

About the A' Design Award i Platina

Guangming Public Service Regjeringskontorbygning er vinner av A' Design Award i Platina, en ekstremt prestisjefylt anerkjennelse som tildeles virkelig eksepsjonelle, elegante og praktfulle design. Platinavinnere er skaperverk av ypperste klasse, vitnesbyrd om grensene for intellektuell kreativitet, og viser designernes uovertrufne profesjonalitet og genialitet. Slike design forventes å være de mest anerkjente verkene som definerer estetikken i en epoke, bidrar til samfunnets velvære og flytter grensene for kunst, vitenskap, design og teknologi. Guangming Public Service Regjeringskontorbygning viser et transcendent nivå av fortreffelighet og gjør uten tvil verden til et bedre sted med sine fordelaktige og verdifulle egenskaper. Guangming Public Service Regjeringskontorbygning er et verk som har vunnet A' Design Award i Platina, og som vekker begjær, inspirerer, begeistrer, gleder og gir stor fryd.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: The designer didn't just say no to "Taishi Chair" form but took a more indirect, flexibleway. There are 2 small hills about 30m high and the plot was full of piles of earth dumped from surrounding construction sites, leaving little space for dumped earth for the project. Based on the site conditions, the designer proposed to preserve the 2 hills, whichcanreduce the excavation work while also helping form a group of green hills that extend to the Niu Mountain on the north side of the plot.
Dimensions & Packaging: Total land area: 29,013.71 sqm
Gross floor area: 81,198.86 sqm
Floor area ratio: 2.17
Height: 53.3 m
Floors: 11 (10 above the ground and 1 underground)
Tags: Public service platform, government building, Zhubo Design,mix use building, office spaces
Production Technology: The project has following structural features:
1. The structure system uses the shear wall structure that is transformed from the combination of diagonal strut andtruss. The span reaches 42.5 m.
2. There are overhangs floor by floor above the transitional floor. The longest one is 12.6 m, supported by inclined columns.
3. The first floor above the ground has an undulating surface while at the middle of standard floors are some openings at the facade.
Design Challenge: There were three challenges confronted by the design team:
1. The span of openings at the middle part is so large that the construction is difficult.
2. The arrangement of steel beams conforms to the changes of undulating of curved roof. Thus, the drawings and construction must be accurate.
3. The curtain wall of facade adopts triangle perforated panel with an optimized size. Realizing a continuous curved surface made from triangle panels needs high-level abilities of construction and geometry optimization experience in design stage.
Research: The solution not only solved practical problems but also responded to the low-impact development mode advocated by the District. Fortunately, the authority eventually agreed to preserve the southern hill, so that a "Taishi chair" layout featuring enclosures on three sides would be impossible for this project.
Inspiration: Taishi Chair-like layout (three sides enclosed, south side open) is very common among Chinese government buildings, and was also requested in the project's design brief. Even so, the designer intended to break the conservative Taishi Chair-like spatial pattern, with a view to bringing a new image and injecting vitality into the government architecture.
Project Duration: 2013-2019
Shenzhen City, China
Operation Flow: Considering that the planning of Guangming Districtemphasizes a green city development mode with low impact, the designer suggested that the buildingset an example to implement the concept.
The design team divided the building into 2blocks with distinct forms at vertical level. The upper rectangular volume is office, while the lower block functions as a public service hall, whose rooftop is shaped like anundulating "mountain range".The flexible curved plane of the "mountain"creates a relaxing atmosphere.
Team Members: Project directors: Feng Guochuan, Zhong Qiao, Liu Xiaoying
Executive managers: Qu Yu, Zhang Biqin, Xiong Guilin
Designers: Xu Longjie, Gong Xiaowen, Deng Hua, Zhang Meisong, Hou Lianjian, Bao Shaobin, Qu Zhenhua, Liang Fuji, Xie Bo, Lv Fang
Image Credits: Xia Zhi