Designet Sprout Sykkel av JunXiang Cheng and Yi Yang er en høyt verdsatt vinner av den svært prestisjetunge 2022 A' Design Award i Jern i konkurransekategorien 3D-printede former og produkterdesign.
Jern3D-printing· 2022
Sprout Sykkel
Klient: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao
Vinner av A' Design Award i Jern i kategorien 3D-printing
Verifisert prisvinner
Verifiser prisstatus for #137286Designet
Om Sprout Sykkel
Sprout er en sykkel produsert ved tredimensjonal utskrift. Rammen er utformet gjennom topologioptimalisering, som plasserer materiale kun der det er nødvendig og reduserer den totale materialmengden som brukes. Statisk spenningsanalyse med elementmetoden bekrefter stabiliteten til rammekonstruksjonen. Den endelige modellen er printet i nylon med høy tetthet. Sykkelen måler 1630 mm i lengde, 600 mm i bredde og 832 mm i høyde. Utskrift fjerner behovet for kostbare støpeformer, slik at hver ramme kan følge en individuell design.
Anerkjennelsen
Om A' Design Award i Jern
Sprout Sykkel er vinner av A' Design Award i Jern, en prestisjefylt anerkjennelse som tildeles gode design som oppfyller de profesjonelle og industrielle kravene man forventer av veldesignede skaperverk. Jernvinnere viser stor dyktighet, høy spesialisering, ekspertforståelse og kreativ kapasitet hos skaperne. Sprout Sykkel forventes å være et høyt ansett, beundret og verdsatt skaperverk som er praktisk og nyskapende. Dette designet, som har vunnet A' Design Award i Jern, integrerer bransjens beste praksis og har kompetente tekniske egenskaper knyttet til kunnskap og talent. Sprout Sykkel respekteres for sin grundighet og er utformet for å gi forbedringer i livskvalitet som bidrar til å gjøre verden til et bedre sted.
Bak designet
Pressepakke
Krediteringer, teammedlemmer og tekniske detaljer levert av designeren.
- Unike egenskaper
- Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
- Dimensjoner og emballasje
- Length 1630mm, width600mm, height 832mm
- Stikkord
- Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
- Produksjonsteknologi
- The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
- Designutfordring
- The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
- Forskning
- Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
- Inspirasjon
- According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
- Prosjektvarighet
- The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
- Driftsflyt
- By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
- Teammedlemmer
- Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao
Sponset
Utforsk utover Designers.org
Oppdag produkter, tjenester og muligheter fra våre annonsepartnere.
Mer å utforske
Relaterte design
Utforsk flere prisvinnende design fra samme kategori, valgt etter fortjeneste.
