Het ontwerp Optique Bank door Albert Potgieter is een hoog aangeschreven winnaar van de zeer prestigieuze 2022 A' Design Award in IJzer in de competitiecategorie Meubelontwerp.
IJzerMeubels· 2022
Optique Bank
door Albert Potgieter
Opdrachtgever: Albert Potgieter Designs
Winnaar van de A' Design Award in IJzer in de categorie Meubels
Geverifieerde Prijswinnaar
Verifieer de prijsstatus voor #129032Het Ontwerp
Over Optique Bank
De Optique bank is ontworpen als een functioneel kunstwerk. De focus van dit ontwerp ligt op het visuele aspect, vandaar de naam Optique. Omdat het in Afrika is ontworpen, heeft het enkele eigenschappen van de natuur en wildheid. Het trekt de aandacht omdat het de indruk wekt van beweging en leven. De Optique Bench is gemaakt van vele afzonderlijke stukken massief hout die worden gesneden, geschuurd, geprepareerd, geolied en vervolgens aan elkaar gelijmd en als een puzzel worden opgebouwd tot een massief meubelstuk.
De Erkenning
Over de A' Design Award in IJzer
Optique Bank is winnaar van de A' Design Award in IJzer, een prestigieuze erkenning die wordt toegekend aan goede ontwerpen die voldoen aan de professionele en industriële eisen die worden verwacht van goed ontworpen creaties. Winnaars in IJzer tonen grote vaardigheid, hoge specialisatie, deskundig inzicht en het creatieve vermogen van hun makers. Optique Bank wordt verwacht een hooggewaardeerde, bewonderde en gekoesterde creatie te zijn die praktisch en innovatief is. Dit ontwerp dat de A' Design Award in IJzer heeft gewonnen, integreert de beste praktijken uit de sector en heeft bekwame technische kenmerken die verbonden zijn met knowhow en talent. Optique Bank wordt gerespecteerd om zijn grondigheid en is ontworpen om verbeteringen van de levenskwaliteit te bieden die helpen de wereld een betere plek te maken.
Achter het Ontwerp
Perskit
Credits, teamleden en technische details verstrekt door de ontwerper.
- Unieke Eigenschappen
- The Optique bench was designed to be a functional art piece. To be a unique furniture piece in the house, but that also gives an atmosphere to the room it’s in. The uniqueness of this design lies in its visual aspect, hence the name, Optique. It captures the attention as it gives the impression of movement and being alive. Being designed in Africa it also carries the properties of nature and wildness with it, giving it a very special, unique look. The core of the design is to attract, to gather around and to enhance the space it fills.
- Afmetingen & Verpakking
- Length 1600mm x Width 550mm x Height 450mm
- Tags
- bench, interior, handmade, seating, home, art, living room, design
- Productietechnologie
- The Optique Bench came to be in a very unique way. Only an idea or part was designed on paper at first, when Albert jumped into the building process. This turned the building and designing process into one and as a result, caused the bench to form organically into the piece it is today.
The Optique Bench is all handmade in solid hardwood. Piece by piece it’s cut, set in the right position, glued together and slowly it is built up into bigger and bigger pieces. Only wood and glue is used in the production of the Optique Bench while a tiny bolt is used in the bottom of the leg to give a bit of detail. - Ontwerpuitdaging
- The hardest part of this design was to make the Optique Bench strong enough so that it can be moved around etc. Since there are so many joints, this can cause a problem in durability. The first prototype was made by using screws at every joint, but this causes the wood to split in some places and it is actually not as strong as wood glue. In the second bench, no screws were used, only wood glue. The joints were strong to use and sit on, but moving the bench around too much caused some of the joints to split open slightly. A solution was found by strengthening every joint with a wooden dowel or domino, causing the bench now to be strong for use and for transport.
The other creative challenge was getting the wood pieces in the legs in exactly the right angle so that when you put the joints together it doesn’t split open in the back of the joint or has a gap in the front of the joints. This was overcome after a few trials and making a mold, where every piece of wood, that is used in the legs, gets put into the mold one by one and put through the planer before being glued.
Another creative challenge was the finishing phase. As a result of using the individual pieces of wood and the gaps between each piece, it is difficult to sand and oil everywhere and inevitably adds an enormous amount of time. This can cause inconsistencies in the aesthetics of the Bench if not done properly. However, this is overcome by sanding and oiling every individual piece before gluing, excluding the portions that will be glued together. - Onderzoek
- Research, when it comes to designing, cannot necessarily be define as something specific or to a date or time. It is a way of living, keeping your eyes open to what is around you. Seeing the abstract forms or the natural lines of nature outside. The cracks and grooves in a tree trunk, the way leaves are scattered on the ground, the shapes it makes, the ripples in water when the wind blows over it. That is the kind of constant research that in the end accumulates and comes together into a product, such as the creation of the Optique Bench.
- Inspiratie
- Many of Albert Potgieter's inspiration comes from the awe of observing nature, the lines and shapes that it produces. The Optique Bench design is no exception. The inspiration came whilst being on the family game farm in South Africa, observing tree lines, golden grass fields waving in the wind and the many intricacies of the bushveld. The design idea that started in South Africa, together with the need to produce an environmentally friendly design by using off-cut pieces of wood, turned into the first prototype of the Optique bench. This design still carries those raw, wild yet linear lines and awe that is seen in nature.
- Projectduur
- The designing process started in December 2018 on the Family game farm in South Africa, and the production was finalized in February 2019 in Rotterdam, Netherlands
- Werkproces
- The Optique Bench is considered functional art- it has the ability to create an atmosphere of comfort and community, while it also has the ability to initiate conversation as only art can while you are admiring the visual aspects of the design. It was designed to be visually attractive while still being used functionally and through this, has the ability to change the atmosphere of a home.
- Beeldcredits
- Image #1: Photographer Martijn Roos, Optique Bench, 2020
Image #2: Photographer Martijn Roos, Optique Bench, 2020
Image #3: Photographer Martijn Roos, Optique Bench, 2020
Image #4: Photographer Martijn Roos, Optique Bench, 2020
Image #5: Photographer Martijn Roos, Optique Bench, 2020
Gesponsord
Ontdek Meer dan Designers.org
Ontdek producten, diensten en mogelijkheden van onze advertentiepartners.
Meer om te Ontdekken
Gerelateerde Ontwerpen
Ontdek meer bekroonde ontwerpen uit dezelfde categorie, geselecteerd op verdienste.
