IJzer 3D-printen · 2024

Plan Ta Modulaire Vaas

by Xavier Zhagui

A' Design Award in IJzer 2024 in 3D-printen
CLIENT: DEZIGN for X
Estimated Number of Design Views: 34,593
Verification code 1D735119C1 · Verify this award

Visit Site View at A' Design Award Press Release

Colors

About Plan Ta Modulaire Vaas

De ontwerper werd geïnspireerd door zijn jeugd, waarin hij omringd was door natuurlijke planten en bouwblokken in zijn kamer. Dit deed de vraag rijzen of er een manier was om deze twee te combineren. Door gebruik te maken van de unieke eigenschappen van ruimtevullende veelvlakken en 3D-printing, kon de ontwerper een antwoord vinden op deze vraag. De oplossing nam vorm aan in Plan Ta, een systeem van magnetische plantenbouwblokken die niet alleen een verscheidenheid aan kamerplanten kunnen bevatten, maar ook gebruikt kunnen worden om mee te bouwen en te spelen.

About the A' Design Award in IJzer

Plan Ta Modulaire Vaas is winnaar van de A' Design Award in IJzer, een prestigieuze erkenning die wordt toegekend aan goede ontwerpen die voldoen aan de professionele en industriële eisen die worden verwacht van goed ontworpen creaties. Winnaars in IJzer tonen grote vaardigheid, hoge specialisatie, deskundig inzicht en het creatieve vermogen van hun makers. Plan Ta Modulaire Vaas wordt verwacht een hooggewaardeerde, bewonderde en gekoesterde creatie te zijn die praktisch en innovatief is. Dit ontwerp dat de A' Design Award in IJzer heeft gewonnen, integreert de beste praktijken uit de sector en heeft bekwame technische kenmerken die verbonden zijn met knowhow en talent. Plan Ta Modulaire Vaas wordt gerespecteerd om zijn grondigheid en is ontworpen om verbeteringen van de levenskwaliteit te bieden die helpen de wereld een betere plek te maken.

Press Kit

Unique Properties: Utilizing the unique properties of space filling polyhedrons and 3D printing, I was able to create a system of magnetic planter building blocks that you can play and build with. The modular properties of the design allow for space saving advantages by packing multiple planters together into one structure rather than spread out on a surface. A series of sizes has been created to house different types of plants, the smallest being an air plant, and the biggest being a house plant.
Dimensions & Packaging: Small Vase
50.8mm x 71.8mm x 50.8mm
Large Vase
127mm x 179.6mm x 127mm
Tags: 3D Printing, Vase, Modular, digital fabrication, dezignforx
Production Technology: Inner and outer shell are (FDM) 3d printed with a textured finish. Neodymium Sphere magnets are inserted as the connection points. The material is PETG for its water resistance.
Design Challenge: Creating an intuitive module that functioned both as a planter and building blocks that were fun and easy to build with.
Research: Creating a modular form that was intuitive to use and had a simple form led me to research space-filling polyhedrons. Utilizing the rapid prototyping abilities of 3d printing I was able to iterate and experiment with various polyhedron forms to find the most efficient solution. After concluding that rhombic dodecahedron would be the most balanced solution between efficiency and aesthetics, I experimented with different joint connections that would join the modules together. A series of freely rotating magnetic spheres inserted into the vase provided a simple yet effective way of joining the modules together. Material was the final stage of research, 3D printed PLA was the initial choice for its unique characteristics of biodegradability. Unfortunately, it is a very porous material which allowed drainage water leak from the vase. 3D printed PETG was more effective for its water-resistant properties. PETG is not biodegradable compared to PLA, but we are currently researching ways to recycle and cut waste, such as utilizing print to order 3d printing manufacturing strategies compared to wasteful mass production plants.
Inspiration: During my childhood I found a deep appreciation for natural plants in my room, and I spent a lot of time playing around and creating with building blocks. I wondered if there was a way to combine the two simple ideas. That question is what drove me to explore different geometries and manufacturing processes such as 3D printing to discover a solution.
Project Duration: The project was started in July 2018 in Las Vegas and is in the final stages of development for production.
Operation Flow: All vases connect to each other magnetically by aligning the faces of a vase of the same size allowing you to stack them in any axis. A wall mount has also been designed, allowing you to tile any size vase onto a vertical surface. There are two sizes available, a small one and a large one.
For the small vase you simply insert the air plant into the vase and take it out when it needs to be watered. The large vase has two shells, an interior shell where the plant lives in, and the exterior shell that collects the drainage. To ease maintenance, the interior shell can be removed to allow for easier watering and trimming.
Patents: Patent Pending
Image Credits: All Images: Photographer Xavier Zhagui, Plan-Ta, 2024.