Designet Vista EY2T Motorisert biometrisk identifikasjonskamera av Chris Dopp & Travis Baldwin er en høyt ansett vinner av den svært prestisjetunge 2015 A' Design Award i Sølv i konkurransekategorien Sikkerhets- og Overvåkningsproduktdesign.
SølvSikkerhetsprodukter· 2015
Vista EY2T Motorisert biometrisk identifikasjonskamera
av Chris Dopp & Travis Baldwin
Klient: Vista Imaging and Crea Inc Design LTD
Vinner av A' Design Award i Sølv i kategorien Sikkerhetsprodukter
Verifisert Prisvinner
Verifiser Prisstatus for #40052Designet
Om Vista EY2T Motorisert biometrisk identifikasjonskamera
Vista EY2T er et motorisert biometrisk identifikasjonskamera for iris- og ansiktsgjenkjenning. Enheten skanner synsfeltet etter ansikter, og motorer roterer deretter kameraet for å rette seg mot øynene. Et bredt spekter av infrarøde LED-er og et autofokussystem muliggjør opptak på en avstand fra 0,9 til 1,8 meter, slik at manuell sikting ikke er nødvendig. Ni frontsensorer er samlet bak en enkelt svart flate, og den sylindriske pilleformen med avrundede ender skaper et rolig og ikke-truende uttrykk. Kameraet kan brukes frittstående eller med veggmontering.
Anerkjennelsen
Om A' Design Award i Sølv
Vista EY2T Motorisert biometrisk identifikasjonskamera er vinner av A' Design Award i Sølv, en usedvanlig prestisjefylt anerkjennelse som tildeles design i toppklassen som er nydelige og imponerende. Sølvvinnere er enormt briljante og usedvanlig kreative verk som viser designernes enestående ekspertise, talent og skarpsindighet. Vista EY2T Motorisert biometrisk identifikasjonskamera forventes å være et praktfullt utstillingsverk som er bemerkelsesverdig profesjonelt og dypt nyskapende. Dette designet, som har vunnet A' Design Award i Sølv, er en svært bemerkelsesverdig, beundret oppfinnelse som gagner og flytter grensene for kunst, vitenskap, design og teknologi. Vista EY2T Motorisert biometrisk identifikasjonskamera er et skaperverk mange misunner, som vekker ønsker, gir positive følelser og vekker undring og forundring.
Bak designet
Pressepakke
Krediteringer, teammedlemmer og tekniske detaljer levert av designeren.
- Unike Egenskaper
- The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
- Dimensjoner og Emballasje
- The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm. - Stikkord
- Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
- Produksjonsteknologi
- The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
- Designutfordring
- The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
- Forskning
- Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
- Inspirasjon
- Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
- Prosjektvarighet
- The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
- Driftsflyt
- When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture. - Teammedlemmer
- Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin - Bildekreditering
- Image #1: Photographer Travis Baldwin / In Office / 2015
Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015
Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015
Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015
Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015
Sponset
Utforsk Utover Designers.org
Oppdag produkter, tjenester og muligheter fra våre annonsepartnere.
Mer å utforske
Relaterte design
Utforsk flere prisvinnende design fra samme kategori, utvalgt etter fortjeneste.
