Foxpat Kirurgisk treningssimulator av Nitin Gurram

Designet Foxpat Kirurgisk treningssimulator av Nitin Gurram er en høyt ansett vinner av den svært prestisjetunge 2020 A' Design Award i Sølv i konkurransekategorien Utdannings-, Læremiddel- og Opplæringsinnholdsdesign.

SølvUtdanning· 2020

Foxpat Kirurgisk treningssimulator

av Nitin Gurram

Klient: Zimmer Biomet

Vinner av A' Design Award i Sølv i kategorien Utdanning

38,485

Verifisert Prisvinner

Verifiser Prisstatus for #90099

Besøk nettsted Se hos A' Design Award Pressemelding Prismerke

Farger

Designet

Om Foxpat Kirurgisk treningssimulator

Foxpat er en gjenbrukbar treningssimulator for kneprotesekirurgi. Enheten er en fysisk modell av et pasientkne, utstyrt med sensorer som gir tilbakemelding på operasjonsytelsen. Bein i polyuretan og et bløtvevsdekke i silikon holdes av en aluminiumsramme, slik at kirurger kan øve med de samme verktøyene som brukes i operasjonssalen, uten en assistent til å holde kneet. En trådløs kirurgisk klubbe registrerer slagkraften og viser resultatet på en LED-skala. Foxpat lar uerfarne kirurger lære av feil uten å skade en pasient.

Anerkjennelsen

Om A' Design Award i Sølv

Foxpat Kirurgisk treningssimulator er vinner av A' Design Award i Sølv, en usedvanlig prestisjefylt anerkjennelse som tildeles design i toppklassen som er nydelige og imponerende. Sølvvinnere er enormt briljante og usedvanlig kreative verk som viser designernes enestående ekspertise, talent og skarpsindighet. Foxpat Kirurgisk treningssimulator forventes å være et praktfullt utstillingsverk som er bemerkelsesverdig profesjonelt og dypt nyskapende. Dette designet, som har vunnet A' Design Award i Sølv, er en svært bemerkelsesverdig, beundret oppfinnelse som gagner og flytter grensene for kunst, vitenskap, design og teknologi. Foxpat Kirurgisk treningssimulator er et skaperverk mange misunner, som vekker ønsker, gir positive følelser og vekker undring og forundring.

Bak designet

Pressepakke

Krediteringer, teammedlemmer og tekniske detaljer levert av designeren.

Unike Egenskaper: Foxpat is a reusable training simulator for knee replacement surgery. Unlike the existing digital simulators, Foxpat is a physical simulation of a patient knee integrated with sensors to feedback on operational performance. The learning platform incorporates all the four stages of Kolb's experiential learning cycle; feel, observe, learn and experiment. The surgeons can use actual tools that are used in the operating room to practice independently without needing an assistant to hold the knee.
Dimensjoner og Emballasje: Width 900 mm x Depth 600mm x Height 400mm.
Stikkord: Arthroplasty, Knee Replacement, Medical Training, Surgical simulator, Impact hammer
Produksjonsteknologi: The product consists of polyurethane(PU) bones, 3D scanned knee anatomy, aluminium structural frame and a wireless surgical mallet. The lower leg is made up of ABS plastic, and the upper knee joint is vacuum cast with silicone of shore hardness 0030. The PU bones are vacuum casted for 320gm/cc density to simulate a realistic bone density. The low production volume of 50 pieces per year, allows producing most of the plastic and aluminium parts through CNC milling.
Designutfordring: Orthopedics surgeries involve invasive processes like cutting, milling, and hammering. Making a realistic training model simulating the ergonomics of an actual operation is quite complicated. Secondly, there is not any standardized validation procedure to feedback the surgeons. Several studies have suggested that the hammer impact is a crucial element for positive results. So the impact force is recoded through a wireless surgical mallet to feedback the user on an LED impact scale.
Forskning: The project was a graduation thesis took place with collaboration between Zimmer Biomet and Delft University of Technology. Oxford Partial Knee Replacement is one of the most popular Knee Replacement techniques from Zimmer Biomet. The research took place in two hospitals in Oxford, where the surgical technique was invented. The outcome of this project was expected to support Oxford training course that takes place across the world to train the novice surgeons on the surgical techniques.
Inspirasjon: Research shows that it takes about 25 surgeries for novice surgeons to be proficient at knee replacement surgery(Qidong et al., Journal of Orthopaedic Surgery and Research, 9:81). So designing efficient and ergonomic surgical tools is not just enough, but an excellent learning platform is crucial. This idea has led to developing a reusable surgical trainer where surgeons are allowed to make mistakes without harming a patient and gain surgical skills.
Prosjektvarighet: The project started in March 2019 in Delft, The Netherlands and finished in August 2019, and was exhibited at Innovation for Health - Design Expo in Rotterdam in February 2020.
Driftsflyt: As the product is used for training the novice surgeons, the training sessions take place in a conference hall or a hospital. A training support team that organizes the training or a local technician in the hospital will set up the device. Firstly, the metal frame is clamped down to a suitable table. Secondly, a new pair of Polyurethane bones are inserted into the device and clamped. Lastly, the silicon soft tissue is wrapped around the bones and locked with a Velcro strap.
Teammedlemmer: Nitin Gurram
Bildekreditering: Image #1, Image #2, Image #3 and Image #4: Keyshot Renders, Nitin Gurram, 2020. Image #5: Photographer and model Nitin Gurram, Foxpat photoshoot, 2020.
Video Credits: Zimmer Biomet, TU Delft, Oxford Knee Group