Beke Mpando wa Bala ku Khitchini by John G Williams is a highly esteemed winner of the very prestigious 2019 Mphoto ya Chitsulo ya A' Design Award in Mapangidwe a Fenicha Competition Category.
ChitsuloFenicha· 2019
Beke Mpando wa Bala ku Khitchini
Client: John G Williams Fine Furniture
Mphoto ya Chitsulo ya A' Design Award Winner in Fenicha Category
Verified Award Winner
Verify Award Status for #71063The Design
About Beke Mpando wa Bala ku Khitchini
Beke ndi mpando wa bala ku khitchini wopangidwa kuti azigwiritsidwa ntchito pa kaunta ya khitchini kapena pa bala ya chakudya chammawa. Dzina Beke limatanthauza mtendere komanso kulumikizana. Kapangidwe ka mpando, msana wake ndi pofikira mapazi kadapangidwa mwaluso kuti kapatse kutha msanga panthawi yogwiritsa ntchito nthawi yayitali. Mpando wake ndi wapadera wopangidwa ndi plywood laminate yomalizidwa ndi veneer ya walnut. Miyendo yakumbuyo yapangidwa mwa njira ya nthunzi kupindika m'magawo awiri kenako nalumikizidwa pamodzi kuti akhale olimba kwa nthawi yayitali popanda kusintha mawonekedwe. Msana wa mpando wapangidwa kuchokera ku matabwa opangidwa mwapadera omangidwa pamodzi ngati mbiya. Fremu yoyera ya ash yapangidwa mwaluso kuti ipatse mpandowu mawonekedwe opepuka komanso odekha.
The Recognition
About the Mphoto ya Chitsulo ya A' Design Award
Beke Mpando wa Bala ku Khitchini ndi mmodzi mwa opambana a Mphoto ya Chitsulo ya A' Design Award, kuzindikirika kolemekezeka komwe kumaperekedwa kwa mapangidwe abwino omwe amakwaniritsa zofunika za akatswiri ndi za makampani zomwe zimayembekezeka kuchokera ku zolengedwa zopangidwa bwino. Opambana a Chitsulo amaonetsa luso lalikulu, ukatswiri wapamwamba, kumvetsetsa kwa akatswiri ndi mphamvu yolenga ya opanga awo. Beke Mpando wa Bala ku Khitchini akuyembekezeka kukhala cholengedwa choyamikiridwa kwambiri, chosirira ndi chokondedwa chomwe ndi chothandiza ndi chatsopano. Mapangidwe opambana Mphoto ya Chitsulo ya A' Design Award awa amaphatikiza machitidwe abwino kwambiri a makampani ndipo ali ndi makhalidwe a ukadaulo oyenerera olumikizidwa ndi chidziwitso ndi luso. Beke Mpando wa Bala ku Khitchini amalemekezedwa chifukwa cha kusamala kwake ndipo anapangidwa kuti apereke kukonza kwa moyo kumene kumathandiza kusandutsa dziko kukhala malo abwino.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- An elegant and stable chair for use at a kitchen bar or counter, in the same range at the Beke dining chair. The chair is designed to be comfortable for extended periods of use, and the geometry of seat, backrest, and footrest have been tailored with this in mind.
The seat is a unique custom plywood laminate finished in walnut veneer to an architectural form.
The rear legs are formed in two parts: first by steam bending the graceful form, and then laminating for long term dimensional stability.
The rails are profiled in an attempt to reinforce the overall lightness and sense of peace, and to support the cantilevered seat over the front rail. - Dimensions & Packaging
- Overall dimensions: 1080mm high x 470mm wide x 670mm deep
Seat dimension: 470mm wide x 440mm deep
Backrest dimensions: 540mm wide x 200 mm high
Seat angle: 3 degrees
Backrest angle: 18 degrees
Included angle: 15 degrees
Seat height: 660 mm
Backrest height: 1025mm
Weight: 7.0kg - Tags
- Beke, kitchen bar chair, south africa, hardwood, curved, danish modern, minimalist, ash, walnut, gracefu
- Production Technology
- The chair design incorporates a number of innovative components: custom plywood seat; steam bent rear legs; coopered backrest; and shaped rails:
Custom plywood seat. The seat is formed from 5 plies, which are then finished top and bottom with a walnut veneer. The profile is a custom design that is used to build a purpose made forming press to generate finished seat forms. T nuts are encapsulated in the ply, so that the seat can be securely bolted to the frame with no interruption at all of the top surface of the seat.
Steam bent rear legs. The rear legs are steam bent in two pieces; cooled and stabilized; and then laminated to generate the final leg forms. Regular lamination was discarded on account of the excessive glue joints implied; and steam bending alone risked dimensional instability over time. This innovative combination captures the best of both techniques.
Coopered backrest. Coopering is the ancient art of constructing curved forms as used in barrel construction. The backrest staves are cut with edges 1 degree off perpendicular so that, when glued together, they pull into the curved form. Modified power tools are used to finish shape the graceful curves.
Shaped rails. The rails incorporate forms that echo local Cape Dutch architecture. These are achieved by trimming the rails to custom templates. - Design Challenge
- The main aesthetic challenge in this project was to conceptualize a design that would be recognizably 'Beke' and congruent with the existing dining chair, without merely looking like an elongated version of the same.
The manufacturing challenges were numerous. Combining steam bending with laminating for the rear legs required, in the end, a very complete understanding of the dynamics of steam bending. In particular, how steam bent parts spring back over time required extensive modeling and test work to realize the desired designed end product - Research
- Research focussed mainly on: the geometry of kitchen bar counter and chair; and the various manufacturing processes required to generate Beke
- Inspiration
- Beke means 'peace' and 'to be connected to'. This design is intended to put the user at ease, for extended comfort at the breakfast bar – to provide an ergonomic and aesthetic sense of peace. The design attempts to realize this sense of well-being, and at the same time to support a sense of connection with the space at the bar.
The design: respects the simplicity of the Danish Modern, and yet incorporates luxurious hardwood in the seat and back; integrates South African Cape Dutch architectural motifs with a sweeping architectural profile; uses a clean ash frame to showcase the richness of local and international hardwoods. - Project Duration
- The project was completed over the course of approximately 4 weeks. All design and manufacturing was completed in Johannesburg.
- Operation Flow
- The Beke kitchen bar chair sits permanently near or at the kitchen counter. The user easily steps into the chair, using the front foot rail if preferred. The user can readily sit forward to the kitchen bar, given the small angle of inclination. The user is also comfortably supported by the inclined backrest, which remains comfortable for a number of hours. This sustains the most engaged of mealtime conversations, or possibly a shared sports match at a home bar.
- Patents
- UK IP Office Registered Design: 6047912
Holder: John Griffith Williams, 2018 - Team Members
- John G Williams
- Image Credits
- John G Williams
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
