Arch Krzesło, Taboret bez oparcia by Edvard Glazebrook is a highly esteemed winner of the very prestigious 2021 Brązowa Nagroda A' Design Award in Wzornictwo Mebli Competition Category.
BrązowaMeble· 2021
Arch Krzesło, Taboret bez oparcia
Brązowa Nagroda A' Design Award Winner in Meble Category
Verified Award Winner
Verify Award Status for #106853The Design
About Arch Krzesło, Taboret bez oparcia
Arch to krzesło oraz siedzisko bez oparcia wykonane z rzeźbionej, laminowanej sosny barwionej na czarno. Projekt oparty jest na prostych i powtarzalnych formach i kształtach, które nadają meblowi jednorodny i logiczny wyraz. Pięć identycznych łuków tworzy nogi oraz oparcie krzesła, natomiast siedzisko bez oparcia składa się z trzech połówek łuków spotykających się w centralnym punkcie. Wszystkie elementy są wycinane z laminowanej płyty drewnianej za pomocą frezarki CNC, a następnie klejone i łączone drewnianymi kołkami. Krzywizny wzmacniają konstrukcję mebla w jego najsłabszych punktach.
The Recognition
About the Brązowa Nagroda A' Design Award
Arch Krzesło, Taboret bez oparcia to laureat Brązowej Nagrody A' Design Award, wysoce prestiżowego wyróżnienia przyznawanego znakomitym projektom wyróżniającym się kreatywnością, pomysłowością i przenikliwością. Laureaci Brązowej Nagrody to w pełni utalentowane i uderzająco twórcze artefakty, które poświadczają ogromne doświadczenie, wyobraźnię i zaradność ich twórców. Arch Krzesło, Taboret bez oparcia ma być wysoko cenionym, podziwianym i drogim sercu przedmiotem, który jest wyjątkowo profesjonalny i innowacyjny. Ten projekt nagrodzony Brązową Nagrodą A' Design Award łączy najlepsze praktyki w sztuce, nauce, designie i technologii oraz jest doskonały dzięki dbałości o szczegóły. Arch Krzesło, Taboret bez oparcia znakomicie zaspokaja potrzeby, porusza pragnienia, czaruje uczucia i przemawia do ciekawości.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Dimensions & Packaging
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Tags
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Production Technology
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Design Challenge
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Research
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Inspiration
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Project Duration
- The project started in march 2020 - and finished in late May 2020.
- Operation Flow
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patents
- Copyrights belong to Edvard Glazebrook, 2020
- Team Members
- Edvard Glazebrook
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
