Hydrospine Balastul Pentru Apnea de Ludovic Lahccen and Raoul Morel

Lucrarea Hydrospine Balastul Pentru Apnea de Ludovic Lahccen and Raoul Morel este un câștigător de mare prestigiu al premiului 2023 A' Design Award de Argint în Categoria de Competiție Articole Sportive.

ArgintArticole Sportive· 2023

Hydrospine Balastul Pentru Apnea

de Ludovic Lahccen and Raoul Morel

Client: Apnea Sub

Câștigător al premiului A' Design Award de Argint în Categoria Articole Sportive

755,954

Câștigător Verificat al Premiului

Verificați Statutul Premiului pentru #148412

Vizitați Site-ul Vizualizați la A' Design Award Comunicat de Presă Insigna Premiului

Culori

Designul

Despre Hydrospine Balastul Pentru Apnea

Sistem de greutate pentru spate pentru scufundări libere, care permite un echilibru și flotabilitate ultra precise. Atuurile sale, capacitatea sa de încărcare modulară și rapidă, de până la 6 kg, utilizabilă în orice poziție, orice disciplină de apnee. Este echipat cu o eliberare rapida si catarame de reglare pentru a se adapta la diferite marimi, indiferent de sex, oferind un confort incredibil care te face sa uiti rapid de greutatea purtata. Designul său provine din fuziunea animalelor marine și a echipamentelor create pentru viteză pentru a-i oferi linii foarte hidrodinamice și pentru a oferi o alunecare optimă sub apă. Versatilitatea sa îl face un concept unic

Recunoașterea

Despre A' Design Award de Argint

Hydrospine Balastul Pentru Apnea a câștigat A' Design Award de Argint, o recunoaștere extraordinar de prestigioasă acordată designurilor de top, superbe și impresionante. Câștigătorii Argintului sunt lucrări extraordinar de strălucite și extrem de creative, care ilustrează expertiza, talentul și perspicacitatea remarcabile ale designerilor lor. Se așteaptă ca Hydrospine Balastul Pentru Apnea să fie o lucrare minunată, de referință, remarcabil de profesionistă și profund inovatoare. Acest design câștigător al A' Design Award de Argint este o invenție foarte notabilă și admirată, care aduce beneficii și împinge limitele artei, științei, designului și tehnologiei. Hydrospine Balastul Pentru Apnea este o creație extrem de invidiată, care trezește dorințe, aduce sentimente pozitive și stârnește uimire și mirare.

În Spatele Designului

Dosar de Presă

Credite, membri ai echipei și detalii tehnice furnizate de designer.

Proprietăți Unice: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Dimensiuni și Ambalare: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Etichete: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Tehnologie de Producție: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Provocare de Design: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Cercetare: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Inspirație: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Durata Proiectului: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Flux Operațional: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Brevete: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Membrii Echipei: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Credite Imagini: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel