Arch Стул, табурет без спинки by Edvard Glazebrook is a highly esteemed winner of the very prestigious 2021 Бронзовая премия A' Design Award in Дизайн мебели Competition Category.
БронзоваяМебель· 2021
Arch Стул, табурет без спинки
Бронзовая премия A' Design Award Winner in Мебель Category
Verified Award Winner
Verify Award Status for #106853The Design
About Arch Стул, табурет без спинки
Arch — это стул и сиденье без спинки, выполненные из фрезерованной клеёной сосновой древесины, окрашенной в чёрный цвет. Дизайн построен на простых и повторяющихся формах, что придаёт мебели однородное и логичное выражение. Пять одинаковых арок образуют ножки и спинку стула, тогда как табурет без спинки состоит из трёх полуарок, сходящихся в центре. Все детали вырезаны из клеёной деревянной плиты на станке с ЧПУ, а затем склеены и соединены деревянными шкантами. Изгибы укрепляют мебель в её самых уязвимых местах.
The Recognition
About the Бронзовая премия A' Design Award
Arch Стул, табурет без спинки — лауреат Бронзовой премии A' Design Award, весьма престижного признания, присуждаемого выдающимся проектам, отличающимся творческим подходом, изобретательностью и сообразительностью. Обладатели Бронзовой премии — это в полной мере искусные и поразительно творческие произведения, свидетельствующие об огромном опыте, воображении и находчивости их авторов. Ожидается, что Arch Стул, табурет без спинки станет высокоценимым, вызывающим восхищение и дорогим сердцу объектом, заметно профессиональным и инновационным. Этот проект, получивший Бронзовую премию A' Design Award, воплощает лучшие практики в искусстве, науке, дизайне и технологиях и превосходен вниманием к деталям. Arch Стул, табурет без спинки прекрасно удовлетворяет потребности, затрагивает желания, очаровывает чувства и пробуждает любопытство.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Dimensions & Packaging
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Tags
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Production Technology
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Design Challenge
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Research
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Inspiration
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Project Duration
- The project started in march 2020 - and finished in late May 2020.
- Operation Flow
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patents
- Copyrights belong to Edvard Glazebrook, 2020
- Team Members
- Edvard Glazebrook
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
