Bora Yildirim ᱨᱮᱱᱟᱜ U Step ᱥᱤᱲᱤ ᱫᱚ ᱤᱢᱟᱨᱚᱛ ᱠᱚᱢᱯᱚᱱᱮᱱᱴ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2018 A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾

ᱥᱳᱱᱟᱤᱢᱟᱨᱚᱛ ᱠᱚᱢᱯᱚᱱᱮᱱᱴ· 2018

U Step ᱥᱤᱲᱤ

Bora Yildirim ᱞᱮᱠᱟᱛᱮ

ᱜᱟᱦᱟᱠ: Bora Yıldırım

ᱤᱢᱟᱨᱚᱛ ᱠᱚᱢᱯᱚᱱᱮᱱᱴ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ

69,548

ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ

#63792 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪ

ᱥᱟᱭᱤᱴ ᱧᱮᱞ ᱢᱮ A' Design Award ᱨᱮ ᱧᱮᱞ ᱢᱮ ᱯᱨᱮᱥ ᱨᱤᱞᱤᱡ ᱯᱩᱨᱥᱠᱟᱨ ᱵᱮᱡ

ᱨᱚᱝ

ᱰᱤᱡᱟᱭᱤᱱ

U Step ᱥᱤᱲᱤ ᱵᱟᱵᱚᱛ ᱛᱮ

U Step ᱥᱤᱲᱤ ᱫᱚ ᱵᱟᱨᱭᱟ u-ᱟᱠᱟᱨ ᱪᱟᱹᱣᱠᱟᱹ ᱵᱚᱠᱥᱚ ᱯᱨᱚᱯᱷᱟᱭᱤᱞ ᱡᱤᱱᱤᱥ ᱠᱚ ᱡᱚᱲᱟᱣ ᱠᱟᱛᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱᱟ, ᱡᱟᱦᱟᱸ ᱠᱤᱱ ᱨᱮᱱᱟᱜ ᱢᱟᱯ ᱵᱷᱮᱜᱟᱨ ᱵᱷᱮᱜᱟᱨ ᱢᱮᱱᱟᱜᱼᱟ᱾ ᱱᱚᱝᱠᱟ ᱛᱮ, ᱥᱤᱲᱤ ᱫᱚ ᱟᱡᱛᱮ ᱜᱚᱲᱚ ᱮᱢᱚᱜᱼᱟ ᱡᱩᱫᱤ ᱢᱟᱯ ᱫᱚ ᱢᱤᱫ ᱥᱤᱢᱟᱹ ᱠᱷᱚᱱ ᱵᱟᱝ ᱵᱟᱹᱲᱛᱤᱭᱟ᱾ ᱱᱚᱶᱟ ᱡᱤᱱᱤᱥ ᱠᱚ ᱢᱟᱲᱟᱝ ᱠᱷᱚᱱ ᱛᱮᱭᱟᱨ ᱠᱟᱛᱮ ᱫᱚ ᱡᱚᱲᱟᱣ ᱨᱮ ᱟᱞᱜᱟ ᱦᱩᱭᱩᱜᱼᱟ᱾ ᱱᱚᱶᱟ ᱥᱚᱡᱷᱮ ᱡᱤᱱᱤᱥ ᱠᱚᱣᱟᱜ ᱯᱮᱠᱤᱝ ᱟᱨ ᱤᱫᱤ ᱠᱟᱛᱮ ᱟᱹᱜᱩᱭ ᱦᱚᱸ ᱟᱹᱰᱤ ᱥᱚᱡᱷᱮ ᱜᱮᱭᱟ᱾

ᱢᱟᱱᱟᱱ

A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ

U Step ᱥᱤᱲᱤ ᱫᱚ A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱵᱷᱟᱞᱟᱭ ᱛᱮ ᱵᱷᱟᱞᱟᱭ ᱟᱨ ᱥᱩᱱᱫᱚᱨ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ U Step ᱥᱤᱲᱤ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾

ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ

ᱯᱨᱮᱥ ᱠᱤᱴ

ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾

ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ: This project is about how a staircase is formed rather than its design. The staircase is formed by interlocking two u-shaped square box profile pieces having different dimensions. Through this formation, the staircase can support its weight and a side anchor wall is not needed below certain dimensions.
ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ: Tread: 30cm width, 120cm length and 3cm thickness (for wood),
Riser Height: 16cm,
Stair stinger: 5cmx5cm (steel square box profile).
ᱴᱮᱜ ᱠᱚ: Stair, staircase, interlock, modular, self-support
ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ: Stair stringer will be made of steel square box profiles and treads of wood. Glass, aluminum or other metals like mesh can be used for tread as well.
ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ: The challenge at the beginning of every design is to find the one that is not found.
ᱜᱚᱵᱮᱥᱚᱱᱟ: Stairs of various designs and applications are investigated during the design phase of the project. It has been observed that most of the time a stair needs on-site production due to structural constraints and in order to ensure that the staircase will fit and function as desired. This results in loss of time. The project aims to minimize the time loss by a design that is made up of modular parts that can be manufactured in advance, and thus, assembly is the only process required on site.
ᱯᱨᱮᱨᱚᱱᱟ: The project focuses on the scarcity of resources, and hence, aims to minimize the amount of parts to use as well as other valuable resources such as cost, energy and time needed during packaging and transportation. To this end, a simple and lucid design is sought for. Having a modular design, it allows different forms, dimensions, colors and materials to be used in making a staircase. With such flexibility, the design provides a wide variety to meet different space requirements and demands.
ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ: The project started in December 2017 and ended in February 2018.
ᱠᱟᱹᱢᱤ ᱦᱚᱨ: The object is a self-supporting staircase that requires fixing only to the ceiling and the floor. Several U-shaped profiles of different sizes are interlocked to form the stair. Self-support is achieved by alternating the interlocking of the u-shaped pieces in horizontal and vertical arrangement. Components of the stair are made out of flat and small parts as a result of which transport and on-site installation are simplified.