Javad Negin and Melika Etemadi ᱨᱮᱱᱟᱜ Nature ᱦᱤᱨᱟᱹ ᱡᱷᱩᱢᱠᱟ

Javad Negin and Melika Etemadi ᱨᱮᱱᱟᱜ Nature ᱦᱤᱨᱟᱹ ᱡᱷᱩᱢᱠᱟ ᱫᱚ ᱜᱟᱦᱱᱟ ᱰᱤᱡᱟᱭᱤᱱ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2020 A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾

ᱠᱟᱥᱟᱜᱟᱦᱱᱟ· 2020

Nature ᱦᱤᱨᱟᱹ ᱡᱷᱩᱢᱠᱟ

Javad Negin and Melika Etemadi ᱞᱮᱠᱟᱛᱮ

ᱜᱟᱦᱟᱠ: Javad Negin

ᱜᱟᱦᱱᱟ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ

15,903

ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ

#89081 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪ

ᱥᱟᱭᱤᱴ ᱧᱮᱞ ᱢᱮ A' Design Award ᱨᱮ ᱧᱮᱞ ᱢᱮ ᱯᱨᱮᱥ ᱨᱤᱞᱤᱡ ᱯᱩᱨᱥᱠᱟᱨ ᱵᱮᱡ

ᱨᱚᱝ

ᱰᱤᱡᱟᱭᱤᱱ

Nature ᱦᱤᱨᱟᱹ ᱡᱷᱩᱢᱠᱟ ᱵᱟᱵᱚᱛ ᱛᱮ

ᱱᱚᱶᱟ ᱨᱩᱯ ᱨᱮᱱᱟᱜ ᱯᱨᱮᱨᱚᱬᱟ ᱫᱚ ᱯᱨᱚᱠᱨᱤᱛᱤ ᱠᱷᱚᱱ ᱦᱮᱡ ᱟᱠᱟᱱᱟ᱾ ᱯᱨᱚᱠᱨᱤᱛᱤ ᱫᱚ ᱟᱹᱰᱤ ᱵᱤᱥᱛᱤ ᱢᱟᱨᱟᱝ ᱟᱨ ᱚᱱᱟ ᱵᱷᱤᱛᱤᱨ ᱨᱮ ᱵᱷᱟᱵᱱᱟ ᱞᱟᱹᱜᱤᱫ ᱟᱹᱰᱤ ᱞᱮᱠᱟᱱ ᱡᱤᱱᱤᱥ ᱢᱮᱱᱟᱜ-ᱟ᱾ ᱢᱟᱨᱮ ᱚᱠᱛᱚ ᱠᱷᱚᱱ ᱜᱮ ᱡᱤᱣᱤ ᱡᱚᱱᱚᱢ ᱟᱨ ᱨᱩᱣᱟᱹ ᱞᱟᱠᱪᱟᱨ ᱱᱚᱶᱟ ᱠᱟᱛᱷᱟ ᱩᱫᱩᱜ ᱟᱠᱟᱫ-ᱟ᱾ ᱯᱨᱚᱠᱨᱤᱛᱤ ᱨᱮ ᱡᱚᱛᱚ ᱡᱤᱱᱤᱥ ᱚᱱᱚᱱᱛᱚ ᱢᱮᱱᱟᱜ-ᱟ ᱟᱨ ᱡᱤᱣᱤ ᱡᱚᱱᱚᱢ ᱫᱚ ᱚᱱᱚᱱᱛᱚ ᱨᱮᱱᱟᱜ ᱮᱛᱦᱚᱵ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱨᱩᱯ ᱫᱚ ᱢᱟᱱᱮ ᱥᱟᱺᱜᱤᱧ ᱵᱤᱵᱚᱨᱚᱬ ᱥᱟᱶ ᱡᱚᱲᱟᱣ ᱟᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱨᱮ ᱡᱚᱛᱚ ᱦᱟᱹᱴᱤᱧ ᱢᱤᱫ ᱠᱟᱹᱦᱱᱤ ᱞᱟᱹᱭ ᱮᱫᱼᱟᱭ ᱟᱨ ᱢᱤᱫ ᱴᱷᱮᱱ ᱡᱚᱲᱟᱣ ᱟᱠᱟᱱ ᱡᱚᱛᱚ ᱦᱟᱹᱴᱤᱧ ᱫᱚ ᱡᱷᱩᱢᱠᱟ ᱨᱩᱯ ᱛᱮ ᱠᱟᱹᱦᱱᱤ ᱩᱫᱩᱜ ᱟᱠᱟᱫᱼᱟ᱾

ᱢᱟᱱᱟᱱ

A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ

Nature ᱦᱤᱨᱟᱹ ᱡᱷᱩᱢᱠᱟ ᱫᱚ A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱱᱟᱣᱟ ᱵᱷᱟᱵᱱᱟ ᱛᱮ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Nature ᱦᱤᱨᱟᱹ ᱡᱷᱩᱢᱠᱟ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾

ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ

ᱯᱨᱮᱥ ᱠᱤᱴ

ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾

ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ: The overall form of these earrings is very eye-pleasing and has soft curves which is a representative of growth. Unlike other earrings pieces, this model can be divided into two halves, where one of the pieces goes behind the ear and the other one is placed in front of the earlobe. The fact is there are known and unknown facts in nature by human beings is shown perfectly by one piece where it hides behind the ear and one that is placed in front of earlobe.
ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ: The earrings have a height of 44 * 29 mm and the thickness of the lowest part of the design is 1.8 mm whereas the top part is 2.8 mm.
ᱴᱮᱜ ᱠᱚ: Diamond-earring, Jewelry, Earring, Nature, Garnet, Persian, Gemcolors, Gemstonejewelry
ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ: Parts of this earring have been designed in 3D using rhino and matrix software and 3D printing technology with direct casting. The number of stones used is 90 stones. Of these 90 fragments, 54 are diamonds,36 are Garnet Rhodolite raspberries and a Garnet Rhodolite in size of 6.8 mm and weighing about one carat is used.
ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ: The challenge has been the process of manual design and its three-dimensional execution, Designing a single gem with 8 prongs with the notion of infinity has been the most challenging part of the process.
ᱜᱚᱵᱮᱥᱚᱱᱟ: There have been plenty of situations in which the design field has been inspired by nature. This research is the result of the designers’ amazement and excitement by nature and how it reveals new possibilities. When the word design is mentioned what comes to mind is the word description. Here in this design, the main goal was to demonstrate growth in nature despite it being called positive or negative. In order to reach growth, one has to go through hardship which is shown with gem’s culet and once this cycle is complete the earrings finish with round gems as it shows how at the end of any hardship comes the silver lining. This form mystery which is an inseparable part of nature is also shown perfectly by one piece wherefore it goes behind the earlobe and another one comes in front of it.
ᱯᱨᱮᱨᱚᱱᱟ: This design has been inspired by nature and how using it in various forms is trendy in today’s world. Nature can trigger one’s creativity. Throughout history, nature came up with many improving solutions for the challenges it has faced. Every living organism has to go through hardship in order to pass through the growth process. These earrings have been inspired by how going through all the positive and negative aspects of life can lead to growth. Positive features are shown with round gems and negative ones are shown with sharp gems. It can simply be seen how in the end things evolve in a way which positive takes over negative.
ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ: Feb 2018 – Sep 2019 / Tehran, Iran
ᱠᱟᱹᱢᱤ ᱦᱚᱨ: The team has been interested in the nature concepts for jewelry design since its initiation and has started writing scenarios based on this fact and brainstorming ideas with respect to this subject. Then an idea is selected as the chosen design of all the concepts. After the concept design phase, the manual design is initiated and the final design enters the technical drawing stage of the product, using rhino and matrix software to make the drawing 3D, and afterward for Its 3D printing wax and also direct casting with 18-carat Rose gold is prepared and the final stage which is diamond setting.
ᱯᱮᱴᱮᱱᱴ ᱠᱚ: All rights reserved by Culet Jewelry.
ᱴᱤᱢ ᱥᱮᱫᱟᱭ ᱠᱚ: Melika Etemadi
Javad Negin
ᱪᱤᱛᱟᱹᱨ ᱥᱟᱹᱦᱟ: All Photos rendered by Javad Negin
Video: Melika Etemadi