David Polasek طرفان Thermacut پلازما ٽارچ انتهائي معتبر 2021 A' Design Award برونز انعام جو فاتح آهي هارڊويئر، پاور ۽ هٿ اوزار ڊيزائن مقابلي جي درجي ۾.
برونزهارڊويئر· 2021
Thermacut پلازما ٽارچ
David Polasek طرفان
ڪلائنٽ: Novo Design
هارڊويئر درجي ۾ A' Design Award برونز انعام فاتح
تصديق ٿيل ايوارڊ فاتح
ڊزائين #106220 لاءِ ايوارڊ جي حيثيت جي تصديق ڪريوڊزائن
Thermacut پلازما ٽارچ بابت
Thermacut هڪ پلازما ٽارچ آهي، جيڪا ڌاتُ ڪٽڻ لاءِ ٺاهي وئي آهي. هي ٽارچ هڪ پلازما ڪٽنگ سسٽم جو حصو آهي، جيڪو گئس ۽ بجلي جي مدد سان 20000 ڊگري سيلسيس جو شعلو پيدا ڪري ٿو، جيڪو 40 ملي ميٽر تائين ٿلهي اسٽيل کي ڪٽي سگهي ٿو. ايرگونامڪ هينڊل ڪيترن ئي پڪڙڻ جي پوزيشنن جي اجازت ڏئي ٿو. ٽارچ کي بند ھٿ سان هينڊل جي چوڌاري پڪڙي سگهجي ٿو يا آڱوٺي کي هينڊل جي مٿان رکي پڻ. هڪ حفاظتي ٽرگر غير ارادي طور تي هلڻ کان روڪي ٿو. مکيه ڪيس انجيڪشن مولڊنگ ذريعي پلاسٽڪ مان ٺاهيو ويو آهي، ۽ ٻيا پرزا ٽامي، پيتل، اسٽيل، سرامڪ ۽ ربڙ مان ٺاهيا ويا آهن.
سڃاڻپ
A' Design Award برونز انعام بابت
Thermacut پلازما ٽارچ A' Design Award برونز انعام جو کٽيندڙ آهي، تمام گهڻو معزز اعتراف جيڪو تخليقيت، اختراع ۽ ذڪاوت سان ممتاز بهترين ڊيزائنن کي ڏنو وڃي ٿو. برونز جا کٽيندڙ ڀرپور مهارت واريون ۽ نمايان طور تخليقي شاهڪار آهن، جيڪي پنهنجي ڊيزائنرن جي وسيع تجربي، تخيل ۽ ڏاهپ جي تصديق ڪن ٿيون. Thermacut پلازما ٽارچ کان اميد ڪئي وڃي ٿي ته اهو هڪ تمام گهڻو قدر ڪيل، ساراهيل ۽ پيارو شيءِ هوندو، قابل ذڪر حد تائين پيشه ورانه ۽ جدت وارو. هي ڊيزائن جنهن A' Design Award برونز انعام کٽيو آهي، فن، سائنس، ڊيزائن ۽ ٽيڪنالاجي ۾ بهترين طريقا شامل ڪري ٿو ۽ ننڍين تفصيلن ڏانهن ڌيان ڏيڻ ڪري شاندار آهي. Thermacut پلازما ٽارچ ضرورتون خوبصورتيءَ سان پوريون ڪري ٿو، خواهشن کي ڇهي ٿو، جذبن کي موهي ٿو ۽ تجسس ڇڪي ٿو.
ڊزائن جي پسمنظر
پريس ڪِٽ
ڊزائنر طرفان فراهم ڪيل ڪريڊٽس، ٽيم ميمبرز ۽ ٽيڪنيڪل تفصيلات.
- منفرد خاصيتون
- Thermacut plasma torch brings new design of handle for comfortable cutting the metals by plasma arc technology. This ergonomic handle is one part of complex plasma cutting system powered by aggregate which uses gas and electricity to create high temperature flame 20.000 celsius degree to cut metal materials up to 40mm thick. The handle includes safety trigger and offers multiple ways of holding for plasma operators. You can hold device with closed palm around handle or with the thumb on the top of the handle.
- ماپ ۽ پيڪيجنگ
- Width 256mm x Depth 39mm x Height 148mm
- ٽيگ
- Thermacut, Extrafire, Plasma, Torch, Cutting, Metal, Handle, Ergonomics
- پيداواري ٽيڪنالاجي
- Plasma torch consists from metal technology parts which are made of copper, grass and steel. Main case is made of plastic using injection molding technology for mass production. Another parts are made of ceramic, rubber, etc.
- ڊزائين چيلينج
- The bigger challenge of whole development process was the fusion of design styling and technology inside that device. We tried to find optimal solution how to connect well looking product with perfect ergonomic feature and production quality. Another challenge was fitting all technology parts into tight plastic case.
- تحقيق
- The plasma torch Thermacut is product by worldwide producer of plasma cutting systems for manufacturing industry with more than 25 years experience in this industry. Thermacut Extrafire brings new design of handle construction for comfortable cutting the metals by plasma arc technology. This ergonomic handle is one part of complex plasma cutting system powered by aggregate which uses gas and electricity to create high temperature flame 20.000°C. Plastic handle is a shell for plasma cutting torch assembly that carries plasma consumables. Handle with torch body is connected with plasma power supply that delivers current for torch operation. This torch and handle is designed for air cutting applications and works up to 105Amp cutting steel materials up to 40mm thick. Ergonomic handle offers multiple ways of holding for plasma operators. The operator can hold torch ordinarily with closed palm around handle or with the thumb on the top of the handle using special thumb rest spot as support for better leading the torch during cutting process. The handle includes safety trigger to turn the torch on only when operator wants and can not cause injury of operator.
- الهام
- New product design comes from previous series partly and brings new attitude of dynamic ergonomic construction. Body shape with new proportion is more comfortable to hold and opperate during work process. The handle offers more options how to hold device in hand due to organic form and rigorously defined grip fields.
- منصوبي جو عرصو
- The project development of technology and design started in December 2015 in Zlin district in Czech Republic and finished in May 2020 in Czech Republic.
- عمل جو فلو
- Plasma torch uses high temperature flame to cut steel and another metal materials up to 40mm thick. Due to ergonomic handle it is easy and comfy to operate this device safely and correctly. 20.000 celsius degree flame comes into being via ionization of gas nad electricity. Plasma cutting is used in industry mainly, but is available for home improvements and work as well.
- پيٽنٽ
- Copyright 2020, David Polasek - Novo Design & Thermacut k.s. company, Czech Republic.
- ٽيم ميمبر
- R&D Engineer: Zdeněk Lapčík, R&D Engineer: Tomáš Kusák
- تصوير ڪريڊٽ
- Image 1: Creator (designer) David Polasek, Image 2: Creator (designer) David Polasek, Image 3: Creator (designer) David Polasek, Image 4: Creator (designer) David Polasek, Image 5: Creator (designer) David Polasek
اسپانسرڊ
Designers.org کان اڳتي ڳوليو
اسان جي اشتهاري ڀائيوالن جون پراڊڪٽس، خدمتون ۽ موقعا ڳوليو.
وڌيڪ ڳولڻ لاءِ
لاڳاپيل ڊزائنز
ساڳي درجي مان وڌيڪ ايوارڊ جيتندڙ ڊزائنز ڳوليو، جيڪي قابليت جي بنياد تي چونڊيل آهن.
