Waterlight بتي by Jiahua Zhang, Nitesh Reddy and Kejun Li

Waterlight بتي by Jiahua Zhang, Nitesh Reddy and Kejun Li is a highly esteemed winner of the very prestigious 2021 A' Design Award برونز انعام in روشنيءَ جون شيون ۽ فڪسچرز ڊيزائن Competition Category.

برونزروشني· 2021

Waterlight بتي

by Jiahua Zhang, Nitesh Reddy and Kejun Li

A' Design Award برونز انعام Winner in روشني Category

12,743
Verified Award Winner
Verify Award Status for #106626

View at A' Design Award Press Release Award Badge

Colors

The Design

About Waterlight بتي

واٽرلائيٽ هڪ ڊيسڪ ٽاپ لئمپ آهي، جيڪا پاڻي جي نلڪي (فاسيٽ) کان متاثر ٿي ٺاهي وئي آهي. ڪنٽرول بار کي مٿي ۽ هيٺ گھمائڻ سان روشني جي چمڪ تبديل ٿئي ٿي. ڪنٽرول بار کي کاٻي کان ساڄي گھمائڻ سان رنگ جي گرمي (ڪلر ٽمپريچر) کي ترتيب ڏنو وڃي ٿو. گولي جي اندر ٻه پوٽينشيوميٽرز، هڪ اُفقي ۽ ٻيو عمودي، ان پُٽ وولٽيج کي تبديل ڪري اهي اثر پيدا ڪن ٿا. روشني هڪ بنياد تي لڳل LED سيلز ذريعي پيدا ٿئي ٿي. مٿيون حصو برونز مان ٺهيل آهي، مٿيون ڍڪ قدرتي مرمر جو ۽ ٻاهريون خول شيشي جو آهي. هيٺيون ڍڪ هڪ سرڪٽ رکي ٿو جيڪو وائرليس چارجنگ لاءِ استعمال ٿئي ٿو، جنهن سببان هي لئمپ ڪمرن جي وچ ۾ آسانيءَ سان کڻي هلي سگهجي ٿو.

The Recognition

About the A' Design Award برونز انعام

Waterlight بتي A' Design Award برونز انعام جو کٽيندڙ آهي، تمام گهڻو معزز اعتراف جيڪو تخليقيت، اختراع ۽ ذڪاوت سان ممتاز بهترين ڊيزائنن کي ڏنو وڃي ٿو. برونز جا کٽيندڙ ڀرپور مهارت واريون ۽ نمايان طور تخليقي شاهڪار آهن، جيڪي پنهنجي ڊيزائنرن جي وسيع تجربي، تخيل ۽ ڏاهپ جي تصديق ڪن ٿيون. Waterlight بتي کان اميد ڪئي وڃي ٿي ته اهو هڪ تمام گهڻو قدر ڪيل، ساراهيل ۽ پيارو شيءِ هوندو، قابل ذڪر حد تائين پيشه ورانه ۽ جدت وارو. هي ڊيزائن جنهن A' Design Award برونز انعام کٽيو آهي، فن، سائنس، ڊيزائن ۽ ٽيڪنالاجي ۾ بهترين طريقا شامل ڪري ٿو ۽ ننڍين تفصيلن ڏانهن ڌيان ڏيڻ ڪري شاندار آهي. Waterlight بتي ضرورتون خوبصورتيءَ سان پوريون ڪري ٿو، خواهشن کي ڇهي ٿو، جذبن کي موهي ٿو ۽ تجسس ڇڪي ٿو.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Waterlight generates a unique and amazing experience of light control. Turning the control bar up and down changes the intensity of brightness. Turning it from left to right adjusts the temperature of light.
Dimensions & Packaging: Dimensions: Width 80mm x Depth 80 mm x Height 300 mm.
Technical Properties: The potentiometer is the bridge between the action from the user and the effect of the lamp. It changes the brightness and temperature of the lamp by modifying the input voltage which is controlled by the user through the control bar.
Tags: Light, Aesthetic, Water, Faucet, Lamp, Desktop
Production Technology: The head is fixed with two potentiometers inside the sphere, one is horizontal and the other is vertical. Thus, when the user is turning the control bar up and down, the horizontal potentiometer changes the voltage of the electricity to adjust the brightness of the light; when the user is rolling the control bar left and right, the vertical potentiometer changes the voltage of the electricity to modify the temperature of the light.

The light is provided by the LED cells on a base.

For charging, the bottom lid is integrated with a circuit for wireless charging when it is put on the independent wireless charger that is connected to plugs with wire. The lamp can be taken away after charging (e.g. the lamp is charged in the living room when the user is reading there and taken to the bedroom when the user wants to go there).

The head is made of high-quality bronze, the top lid is made of natural marble. And the outer shell is made of glass.
Design Challenge: The biggest challenge was to build the functional potentiometer and circuit to make this design into reality. In the beginning, it was really hard to link the control action and the change of the brightness and temperature of the light in a proper way. The change always went too much or too little. Finally, we found the balance and created a perfect control feeling.
Research: We would like to create an amazing new interaction between the user and the lamp. After a lot of sketches and brainstorming, we came up with this idea and found out that there was not anything like it in the market. So we did five versions of 1:1 scale prototypes to find the best proportion of the shape, enable the potentiometer working, and find the manufacturing process of the marble. It turned out that we need a horizontal and a vertical potentiometer to control the voltage and hence the brightness and temperature of the light. And we found out that the marble can be made by CNC.
Inspiration: Waterlight was inspired by the water faucet which adjusts the volume of water by being turned up and down, and controls the temperature of water by being turned left and right. It enables users to adjust light like using a water faucet, creating a similar feeling between light control and water control, and bringing about more insights into life.
Project Duration: This project started in October 2019 and finished in January 2020 in Milan.
Operation Flow: Turning the control bar up and down changes the intensity of brightness. Turning it from left to right adjusts the temperature of light.
Team Members: Nitesh Reddy N
Kejun Li