Tai پاسي واري ميز by Sunriu Design is a highly esteemed winner of the very prestigious 2023 A' Design Award چاندي انعام in فرنيچر ڊيزائن Competition Category.
چانديفرنيچر· 2023
Tai پاسي واري ميز
Client: Sunriu Design
A' Design Award چاندي انعام Winner in فرنيچر Category
Verified Award Winner
Verify Award Status for #146594The Design
About Tai پاسي واري ميز
تائي هڪ پاسي واري ميز آهي جيڪا رٽائرڊ سب اسٽيشن جي ڌاتوءَ جي چادرن مان ٺاهي وئي آهي. هي ڊيزائن اڇلايل مواد جي استعمال جي مدت کي وڌائي ٿي ۽ فضول مواد کي گهٽائي ٿي. پيداوار لاءِ صرف ليزر ڪٽنگ ۽ موڙڻ جي ضرورت آهي، تنهنڪري قيمتي سانچن جي ضرورت نه ٿي پوي. فليٽ پيڪ ٿيل حصا استعمال ڪندڙ پاڻ جوڙي ٿو، جنهن سان پيداوار جو وقت گهٽجي وڃي ٿو. ٻاهرين ليڪون دعا لاءِ جڙيل هٿن جي تصوير ياد ڏيارين ٿيون، ۽ هيٺين جوڙجڪ بٽرفلاءِ سيٽ کان متاثر آهي. وچ ۾ هڪ کليل جاءِ کليل ڪتاب رکڻ لاءِ آهي. ميز جي ماپ 450 × 350 × 550 ملي ميٽر آهي.
The Recognition
About the A' Design Award چاندي انعام
Tai پاسي واري ميز A' Design Award چاندي انعام جو کٽيندڙ آهي، غير معمولي حد تائين معزز اعتراف جيڪو اعليٰ ترين درجي جي، شاندار ۽ متاثر ڪندڙ ڊيزائنن کي ڏنو وڃي ٿو. چاندي جا کٽيندڙ تمام گهڻا روشن ۽ انتهائي تخليقي ڪم آهن، جيڪي پنهنجي ڊيزائنرن جي شاندار مهارت، صلاحيت ۽ ذڪاوت کي ظاهر ڪن ٿا. Tai پاسي واري ميز کان اميد ڪئي وڃي ٿي ته اهو هڪ شاندار نمائشي ڪم هوندو، قابل ذڪر حد تائين پيشه ورانه ۽ ڳوڙهي جدت وارو. هي ڊيزائن جنهن A' Design Award چاندي انعام کٽيو آهي، هڪ انتهائي قابل ذڪر، ساراهيل ايجاد آهي جيڪا فائدو ڏئي ٿي ۽ فن، سائنس، ڊيزائن ۽ ٽيڪنالاجي جون حدون وڌائي ٿي. Tai پاسي واري ميز هڪ اهڙي تخليق آهي جنهن تي گهڻا حسد ڪن ٿا، جيڪا خواهشون جاڳائي ٿي، مثبت جذبا آڻي ٿي ۽ حيرت ۽ تعجب جي چڻنگ ٻاري ٿي.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- Use the discarded substation metal sheets and only laser cutting, and bending are required to complete the side table. Just like many of Taiwanese unique appliance's feature processing and assembling with existing materials. The Tai Side Table has a place where books can be temporarily placed in the center of the table without bookmarks. The below structure is taken from the butterfly stool. Also, its tabletop can be replaced with any material at our fingertips and can even be transformed into a low table or bench.
- Dimensions & Packaging
- 450 mm x 350 mm x 550 mm
- Tags
- Side Table, Metal Side Table, Side Table Design, Upcycling Furniture, Circular Economy, Circular Design, Minimalist Furniture, Oriental Aesthetics.
- Production Technology
- There is no need to use costly molds and be limited by the minimum production volume. It only requires laser cutting and bending to finish the process. Even if you only make one side table, you can make it by hand bending. The flat-packed design can significantly reduce production time through assemble by user. It is just like the production concept of digital manufacturing.
- Design Challenge
- The most challenging part is that it is not easy to find a factory that can help because the discarded material needs to be cleaned and cut off the rusty part of the metal before the next step of the production process, and factories hardly ever encounter materials that need such treatment.
- Research
- Global warming and environmental pollution have been very important issues for this generation. Reducing carbon emissions is a pressing issue in addressing global warming and environmental pollution. The key to reducing carbon emissions is to shift from a linear economy to a circular economy. The recycling of waste materials is an important part of it, which can significantly reduce waste, pollution and carbon emissions. Tai Side Table aims to effectively utilize retired substation metal plates, extend the service life of the materials, and maximize the use of resources to reduce the burden on the environment.
- Inspiration
- The exterior lines are inspired from IM Pei's The Luce Chapel. It has the image of praying with folded hands in the East. The reason for the flat-packed design which are easy to produce and assemble is to make better effectively use of the retired substation metal sheets to recreate furniture. Under the condition of not using excess sheet metal, we hope to create furniture that is easy to produce, beautiful, and eco-economical.
- Project Duration
- The project started in June 2022 in Taiwan Kaohsiung
- Operation Flow
- The metal edges are trimmed and round cornered to provide a good touch when moving the side table. The original lacquer of the transformer box can be retained or repainted. It's simple exterior and lines make it easy to match most interiors and even outdoor use.
- Image Credits
- Jing Cyuan Tang, 2022.
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
