Thermacut Plazmová horáková pištoľ od David Polasek

Dizajn Thermacut Plazmová horáková pištoľ od dizajnéra David Polasek je vysoko uznávaným víťazom veľmi prestížneho ocenenia 2021 Bronzová cena A' Design Award v súťažnej kategórii Hardvér.

BronzováHardvér· 2021

Thermacut Plazmová horáková pištoľ

od David Polasek

Klient: Novo Design

Víťaz ocenenia Bronzová cena A' Design Award v kategórii Hardvér

48,158

Overený víťaz ocenenia

Overiť stav ocenenia pre #106220

Navštíviť stránku Zobraziť na A' Design Award Tlačová správa Ocenenie – odznak

Farby

Dizajn

O dizajne Thermacut Plazmová horáková pištoľ

Thermacut je plazmová horáková pištoľ určená na rezanie kovu. Horák je súčasťou systému plazmového rezania, ktorý využíva plyn a elektrickú energiu na vytvorenie plameňa s teplotou 20 000 stupňov Celzia, čo umožňuje rezať oceľ o hrúbke až 40 milimetrov. Ergonomická rukoväť umožňuje viacero spôsobov uchopenia. Horák je možné držať zovretou dlaňou okolo rukoväte alebo s palcom opretým o vrchnú časť rukoväte. Bezpečnostná poistka zabraňuje neúmyselnému spusteniu. Hlavné telo je vyrobené z plastu vstrekovaním do formy, ďalšie časti sú vyrobené z medi, mosadze, ocele, keramiky a gumy.

Ocenenie

O ocenení Bronzová cena A' Design Award

Thermacut Plazmová horáková pištoľ je laureát Bronzovej ceny A' Design Award, vysoko prestížneho uznania udeľovaného vynikajúcim dizajnom, ktoré sa vyznačujú kreativitou, vynaliezavosťou a bystrosťou. Laureáti Bronzovej ceny sú plne zručné a nápadne kreatívne artefakty, ktoré potvrdzujú rozsiahle skúsenosti, predstavivosť a zdatnosť svojich dizajnérov. Od Thermacut Plazmová horáková pištoľ sa očakáva, že bude vysoko cenený, obdivovaný a milovaný predmet, pozoruhodne profesionálny a inovatívny. Tento dizajn ocenený Bronzovou cenou A' Design Award zahŕňa najlepšie postupy v umení, vede, dizajne a technológii a vyniká pozornosťou k detailom. Thermacut Plazmová horáková pištoľ skvele uspokojuje potreby, dotýka sa túžob, očarúva city a vzbudzuje zvedavosť.

Za dizajnom

Tlačový kit

Kredity, členovia tímu a technické údaje poskytnuté dizajnérom.

Jedinečné vlastnosti: Thermacut plasma torch brings new design of handle for comfortable cutting the metals by plasma arc technology. This ergonomic handle is one part of complex plasma cutting system powered by aggregate which uses gas and electricity to create high temperature flame 20.000 celsius degree to cut metal materials up to 40mm thick. The handle includes safety trigger and offers multiple ways of holding for plasma operators. You can hold device with closed palm around handle or with the thumb on the top of the handle.
Rozmery a balenie: Width 256mm x Depth 39mm x Height 148mm
Štítky: Thermacut, Extrafire, Plasma, Torch, Cutting, Metal, Handle, Ergonomics
Výrobná technológia: Plasma torch consists from metal technology parts which are made of copper, grass and steel. Main case is made of plastic using injection molding technology for mass production. Another parts are made of ceramic, rubber, etc.
Dizajnérska výzva: The bigger challenge of whole development process was the fusion of design styling and technology inside that device. We tried to find optimal solution how to connect well looking product with perfect ergonomic feature and production quality. Another challenge was fitting all technology parts into tight plastic case.
Výskum: The plasma torch Thermacut is product by worldwide producer of plasma cutting systems for manufacturing industry with more than 25 years experience in this industry. Thermacut Extrafire brings new design of handle construction for comfortable cutting the metals by plasma arc technology. This ergonomic handle is one part of complex plasma cutting system powered by aggregate which uses gas and electricity to create high temperature flame 20.000°C. Plastic handle is a shell for plasma cutting torch assembly that carries plasma consumables. Handle with torch body is connected with plasma power supply that delivers current for torch operation. This torch and handle is designed for air cutting applications and works up to 105Amp cutting steel materials up to 40mm thick. Ergonomic handle offers multiple ways of holding for plasma operators. The operator can hold torch ordinarily with closed palm around handle or with the thumb on the top of the handle using special thumb rest spot as support for better leading the torch during cutting process. The handle includes safety trigger to turn the torch on only when operator wants and can not cause injury of operator.
Inšpirácia: New product design comes from previous series partly and brings new attitude of dynamic ergonomic construction. Body shape with new proportion is more comfortable to hold and opperate during work process. The handle offers more options how to hold device in hand due to organic form and rigorously defined grip fields.
Trvanie projektu: The project development of technology and design started in December 2015 in Zlin district in Czech Republic and finished in May 2020 in Czech Republic.
Pracovný postup: Plasma torch uses high temperature flame to cut steel and another metal materials up to 40mm thick. Due to ergonomic handle it is easy and comfy to operate this device safely and correctly. 20.000 celsius degree flame comes into being via ionization of gas nad electricity. Plasma cutting is used in industry mainly, but is available for home improvements and work as well.
Patenty: Copyright 2020, David Polasek - Novo Design & Thermacut k.s. company, Czech Republic.
Členovia tímu: R&D Engineer: Zdeněk Lapčík, R&D Engineer: Tomáš Kusák
Zdroje obrázkov: Image 1: Creator (designer) David Polasek, Image 2: Creator (designer) David Polasek, Image 3: Creator (designer) David Polasek, Image 4: Creator (designer) David Polasek, Image 5: Creator (designer) David Polasek