Arch Stolička, Stolička bez operadla by Edvard Glazebrook is a highly esteemed winner of the very prestigious 2021 Bronzová cena A' Design Award in Dizajn nábytku Competition Category.
BronzováNábytok· 2021
Arch Stolička, Stolička bez operadla
Bronzová cena A' Design Award Winner in Nábytok Category
Verified Award Winner
Verify Award Status for #106853The Design
About Arch Stolička, Stolička bez operadla
Arch je stolička a sedadlo bez operadla vyrobené z vyrezávaného a čierno moreného lamelového borovicového dreva. Dizajn vychádza z jednoduchých a opakujúcich sa foriem a tvarov, ktoré nábytku dodávajú jednotný a logický výraz. Päť identických oblúkov tvorí nohy a operadlo stoličky, zatiaľ čo sedadlo bez operadla je vytvorené z troch polovičných oblúkov, ktoré sa stretávajú v strede. Všetky časti sú vyrezané z lamelovej drevenej dosky pomocou CNC frézky, následne zlepené a spojené drevenými kolíkmi. Krivky posilňujú nábytok v jeho najslabších miestach.
The Recognition
About the Bronzová cena A' Design Award
Arch Stolička, Stolička bez operadla je laureát Bronzovej ceny A' Design Award, vysoko prestížneho uznania udeľovaného vynikajúcim dizajnom, ktoré sa vyznačujú kreativitou, vynaliezavosťou a bystrosťou. Laureáti Bronzovej ceny sú plne zručné a nápadne kreatívne artefakty, ktoré potvrdzujú rozsiahle skúsenosti, predstavivosť a zdatnosť svojich dizajnérov. Od Arch Stolička, Stolička bez operadla sa očakáva, že bude vysoko cenený, obdivovaný a milovaný predmet, pozoruhodne profesionálny a inovatívny. Tento dizajn ocenený Bronzovou cenou A' Design Award zahŕňa najlepšie postupy v umení, vede, dizajne a technológii a vyniká pozornosťou k detailom. Arch Stolička, Stolička bez operadla skvele uspokojuje potreby, dotýka sa túžob, očarúva city a vzbudzuje zvedavosť.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Dimensions & Packaging
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Tags
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Production Technology
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Design Challenge
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Research
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Inspiration
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Project Duration
- The project started in march 2020 - and finished in late May 2020.
- Operation Flow
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patents
- Copyrights belong to Edvard Glazebrook, 2020
- Team Members
- Edvard Glazebrook
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
