Bend Konferenčný Stolík by Jan Goderis is a highly esteemed winner of the very prestigious 2023 Bronzová cena A' Design Award in Dizajn nábytku Competition Category.
BronzováNábytok· 2023
Bend Konferenčný Stolík
by Jan Goderis
Bronzová cena A' Design Award Winner in Nábytok Category
Verified Award Winner
Verify Award Status for #148865The Design
About Bend Konferenčný Stolík
Stôl je vyrobený z dvoch ohýbaných hliníkových platní, ktoré do seba zapadajú. Po zložení pláty siahajú až k nohám. To dáva dizajnu určitú transparentnosť a ľahkosť a vytvára sa vertikálne úložisko pre časopisy, noviny a pléd. Medzi dvoma hornými doskami je aj možnosť uloženia na oboch stranách stola.
The Recognition
About the Bronzová cena A' Design Award
Bend Konferenčný Stolík je laureát Bronzovej ceny A' Design Award, vysoko prestížneho uznania udeľovaného vynikajúcim dizajnom, ktoré sa vyznačujú kreativitou, vynaliezavosťou a bystrosťou. Laureáti Bronzovej ceny sú plne zručné a nápadne kreatívne artefakty, ktoré potvrdzujú rozsiahle skúsenosti, predstavivosť a zdatnosť svojich dizajnérov. Od Bend Konferenčný Stolík sa očakáva, že bude vysoko cenený, obdivovaný a milovaný predmet, pozoruhodne profesionálny a inovatívny. Tento dizajn ocenený Bronzovou cenou A' Design Award zahŕňa najlepšie postupy v umení, vede, dizajne a technológii a vyniká pozornosťou k detailom. Bend Konferenčný Stolík skvele uspokojuje potreby, dotýka sa túžob, očarúva city a vzbudzuje zvedavosť.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
- Dimensions & Packaging
- Dimensions: 125 x 55 x 28 cm
- Tags
- coffee table, folded table, ecological design, functional design, minimal design
- Production Technology
- Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
- Design Challenge
- The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
- Research
- The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
- Inspiration
- The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
- Project Duration
- The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
- Operation Flow
- The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
- Patents
- e-depot: 000595853
- Team Members
- Jan Goderis
- Image Credits
- #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
