Mira Stol by Cemil Yavuz is a highly esteemed winner of the very prestigious 2021 Železna nagrada A' Design Award in Oblikovanje pohištva Competition Category.
ŽeleznaPohištvo· 2021
Mira Stol
by Cemil Yavuz
Client: Cemil Yavuz
Železna nagrada A' Design Award Winner in Pohištvo Category
Verified Award Winner
Verify Award Status for #116467The Design
About Mira Stol
Mira je stol, zasnovan za jedilnico in splošno sedenje. Ogrodje je izdelano iz treh okroglih profilov iz nerjavečega jekla. Dva profila sta upognjena pod enakim kotom in v isto smer, medtem ko je tretji upognjen drugače. Na ogrodje sta pritrjeni sedežna in hrbtna površina, oblečeni v blago, dokončno podobo pa stolu dajejo po višini nastavljive plastične nogice. Mira je lahek in ga je mogoče postaviti okoli mize ali uporabljati samostojno. Stol lahko uporabljamo nagnjenega v levo ali desno stran. Mira je dobavljen razstavljen, tako da ga uporabniki po odpakiranju sami sestavijo.
The Recognition
About the Železna nagrada A' Design Award
Mira Stol je prejemnik Železne nagrade A' Design Award, prestižnega priznanja, ki se podeljuje dobrim oblikovanjem, ki izpolnjujejo profesionalne in industrijske zahteve, pričakovane od dobro zasnovanih stvaritev. Prejemniki Železne nagrade kažejo veliko spretnost, visoko specializacijo, strokovno razumevanje in ustvarjalne zmožnosti svojih ustvarjalcev. Od Mira Stol se pričakuje, da bo visoko cenjena, občudovana in ljubljena stvaritev, ki je praktična in inovativna. To oblikovanje, nagrajeno z Železno nagrado A' Design Award, vključuje najboljše prakse panoge in ima kompetentne tehnične lastnosti, povezane s strokovnim znanjem in talentom. Zaradi svoje temeljitosti si Mira Stol zasluži spoštovanje in je zasnovan tako, da zagotavlja izboljšave kakovosti življenja, ki pomagajo narediti svet boljši kraj.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Dimensions & Packaging
- Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions. - Tags
- Bending, Metal Profile, Chair, Simple, Elegant
- Production Technology
- The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Design Challenge
- Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
- Research
- As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
- Inspiration
- In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
- Project Duration
- The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
- Operation Flow
- Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
