Delo Da Vinci Vratna blazina avtorja Jiangsu Careseen E-Commerce Co., Ltd. je izjemno cenjeni dobitnik prestižne nagrade 2022 Železna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje pohištva.
ŽeleznaPohištvo· 2022
Da Vinci Vratna blazina
avtor/ica: Jiangsu Careseen E-Commerce Co., Ltd.
Naročnik: Jiangsu Careseen E-Commerce Co., Ltd.
Dobitnik nagrade Železna nagrada A' Design Award v kategoriji Pohištvo
Potrjeni dobitnik nagrade
Preverite status nagrade za #128093Dizajn
O dizajnu Da Vinci Vratna blazina
Da Vinci je vratna blazina, zasnovana za podporo glave in vratu med spanjem. Blazina uporablja dvodelno zasnovo, oblikovano s postopkom prešivanja. Dve tretjini predstavlja predel za oporo glave, napolnjen s puhasto in mehko perjanico, ena tretjina pa je predel za vratno oporo, napolnjen z japonskimi cevastimi tulci. Prevleka je izdelana iz 100-odstotnega bombaža. Zadrga omogoča odstranjevanje tulcev, tako da je višino mogoče prilagoditi. Oblika podpira vrat in drži zadnji del glave. Namen je popraviti ukrivljenost vratne hrbtenice in izboljšati kakovost spanja.
Priznanje
O nagradi Železna nagrada A' Design Award
Da Vinci Vratna blazina je prejemnik Železne nagrade A' Design Award, prestižnega priznanja, ki se podeljuje dobrim oblikovanjem, ki izpolnjujejo profesionalne in industrijske zahteve, pričakovane od dobro zasnovanih stvaritev. Prejemniki Železne nagrade kažejo veliko spretnost, visoko specializacijo, strokovno razumevanje in ustvarjalne zmožnosti svojih ustvarjalcev. Od Da Vinci Vratna blazina se pričakuje, da bo visoko cenjena, občudovana in ljubljena stvaritev, ki je praktična in inovativna. To oblikovanje, nagrajeno z Železno nagrado A' Design Award, vključuje najboljše prakse panoge in ima kompetentne tehnične lastnosti, povezane s strokovnim znanjem in talentom. Zaradi svoje temeljitosti si Da Vinci Vratna blazina zasluži spoštovanje in je zasnovan tako, da zagotavlja izboljšave kakovosti življenja, ki pomagajo narediti svet boljši kraj.
V ozadju dizajna
Komplet za medije
Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.
- Edinstvene lastnosti
- Darwin cervical pillow is designed for the sleeping problems of curved necks and the lower necks not lying on the pillow. It adopts a two-section design, which is filled with down and pipe tubes. By unzipping the pillow, the tubes inside can be taken out to adjust the height. This pillow can effectively support the neck, hold the backside of the head, prevent the neck from not lying on or being pressed by the pillow, thus correcting the curve of the cervical spine and improving their sleep.
- Dimenzije in embalaža
- 740*480*160mm
- Proizvodna tehnologija
- This cervical pillow is ergonomically designed with a quilting process for section-dividing. Two-thirds of it is the headrest area and one-third is the cervical spine relief area. The head section is stuffed with high fluffy down, while the cervical section is filled with Japanese pipe tubes, providing users with comfortable support and efficient breathability. With a 100% cotton pillow top, it can naturally fit the curve of the head, thus adapting to different sleeping positions.
- Oblikovalski izziv
- Different users have varied requirements for the supporting of the cervical spine and the holding of the backside of the head during sleep. How to universally meet their requirements is the biggest problem confronted during R&D. Based on ergonomics, the design team select the highly fluffy down and breathable Japanese pipe tubes as fillings, which keeps the pillow exceedingly soft and comfortable and perfectly fit the curves of users. Thus, this pillow can be universally adapted to anyone.
- Raziskave
- The study shows that a correct sleeping posture needs the head, neck and body in the same line. Whether the pillow is too high or too low is not conducive to relieving the neck or guaranteeing a correct sleeping posture during deep sleep. Ergonomically designed, this pillow adopts high-end imported materials to protect the necks of users, providing them with a comfortable and healthy sleeping experience.
- Inspiracija
- The back of the neck not touching the pillow during sleep and cervical scoliosis are the major problems faced by many people. The design team established a research model based on the sleeping habits of different people, and designed this ergonomic cervical pillow inspired by the position of the head and neck during sleep.
- Potek delovanja
- This cervical pillow adopts a two-section design which is stuffed with down and Japanese pipe tubes respectively, and its surface is made of 100% cotton that can fit head and neck contour of users and keep the respiratory tract open. When the user is asleep, his head and his body weight can form reverse traction to relieve cervical pressure, relax the neck muscles and correct the cervical curve.
Sponzorirano
Raziščite onkraj Designers.org
Odkrijte izdelke, storitve in priložnosti naših oglaševalskih partnerjev.
Odkrijte več
Sorodni dizajni
Raziščite več nagrajenih dizajnov iz iste kategorije, izbranih po kakovosti.
