Sprout Kolo – avtor JunXiang Cheng and Yi Yang

Delo Sprout Kolo avtorja JunXiang Cheng and Yi Yang je izjemno cenjeni dobitnik prestižne nagrade 2022 Železna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje 3D tiskanih oblik in izdelkov.

Železna3D tiskanje· 2022

Sprout Kolo

avtor/ica: JunXiang Cheng and Yi Yang

Naročnik: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Dobitnik nagrade Železna nagrada A' Design Award v kategoriji 3D tiskanje

31,470

Potrjeni dobitnik nagrade

Preverite status nagrade za #137286

Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Sprout Kolo

Sprout je kolo, izdelano s tridimenzionalnim tiskanjem. Okvir je oblikovan s topološko optimizacijo, ki material razporedi le tam, kjer je potreben, s čimer se zmanjša skupna količina uporabljenega materiala. Statična analiza napetosti z metodo končnih elementov potrjuje stabilnost strukture okvirja. Končni model je natisnjen iz najlona visoke gostote. Kolo meri 1630 mm v dolžino, 600 mm v širino in 832 mm v višino. Tiskanje odpravlja potrebo po dragih kalupih, zato lahko vsak okvir sledi individualni zasnovi.

Priznanje

O nagradi Železna nagrada A' Design Award

Sprout Kolo je prejemnik Železne nagrade A' Design Award, prestižnega priznanja, ki se podeljuje dobrim oblikovanjem, ki izpolnjujejo profesionalne in industrijske zahteve, pričakovane od dobro zasnovanih stvaritev. Prejemniki Železne nagrade kažejo veliko spretnost, visoko specializacijo, strokovno razumevanje in ustvarjalne zmožnosti svojih ustvarjalcev. Od Sprout Kolo se pričakuje, da bo visoko cenjena, občudovana in ljubljena stvaritev, ki je praktična in inovativna. To oblikovanje, nagrajeno z Železno nagrado A' Design Award, vključuje najboljše prakse panoge in ima kompetentne tehnične lastnosti, povezane s strokovnim znanjem in talentom. Zaradi svoje temeljitosti si Sprout Kolo zasluži spoštovanje in je zasnovan tako, da zagotavlja izboljšave kakovosti življenja, ki pomagajo narediti svet boljši kraj.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Dimenzije in embalaža: Length 1630mm, width600mm, height 832mm
Oznake: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Proizvodna tehnologija: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Oblikovalski izziv: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Raziskave: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspiracija: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Trajanje projekta: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Potek delovanja: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Člani ekipe: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao