Inogi R1 Koncentrator kisika – avtor Xiao Xu and Qi Yanbin

Delo Inogi R1 Koncentrator kisika avtorja Xiao Xu and Qi Yanbin je izjemno cenjeni dobitnik prestižne nagrade 2023 Srebrna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje medicinskih naprav in medicinske opreme.

SrebrnaMedicinski izdelek· 2023

Inogi R1 Koncentrator kisika

avtor/ica: Xiao Xu and Qi Yanbin

Naročnik: Nanjing Yinuoji Medical Technology Co., Ltd.

Dobitnik nagrade Srebrna nagrada A' Design Award v kategoriji Medicinski izdelek

146,412

Potrjeni dobitnik nagrade

Preverite status nagrade za #149906

Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Inogi R1 Koncentrator kisika

Inogi R1 je miniaturiziran koncentrator kisika za medicinsko uporabo. Naprava zagotavlja pulzni pretok do 6 litrov na minuto. Inogi R1 ločuje kisik iz zraka z molekularnim sitom, zato dodatki niso potrebni, in dosega koncentracijo kisika nad 90 odstotki. Interno razvit krmilni sistem ohranja stabilno delovanje na nadmorskih višinah do 6000 metrov in pri temperaturah do minus 30 stopinj Celzija. Z baterijo enota meri 17,7 krat 7,7 krat 19,4 centimetra in tehta 1,8 kilograma. Molekularno sito in baterijo je mogoče zamenjati v enem koraku.

Priznanje

O nagradi Srebrna nagrada A' Design Award

Inogi R1 Koncentrator kisika je prejemnik Srebrne nagrade A' Design Award, izjemno prestižnega priznanja, ki se podeljuje čudovitim, impresivnim vrhunskim oblikovanjem. Prejemniki Srebrne nagrade so izjemno briljantna in zelo ustvarjalna dela, ki ponazarjajo izjemno strokovnost, talent in bistrost svojih oblikovalcev. Od Inogi R1 Koncentrator kisika se pričakuje, da bo čudovito, zgledno delo, opazno profesionalno in globoko inovativno. To oblikovanje, nagrajeno s Srebrno nagrado A' Design Award, je zelo opazen, občudovan izum, ki koristi in premika meje umetnosti, znanosti, oblikovanja in tehnologije. Inogi R1 Koncentrator kisika je stvaritev, ki ji mnogi zavidajo, ki prebuja želje, prinaša pozitivna čustva in vzbuja začudenje in občudovanje.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: INOGI-R1 is the first medical grade miniaturized oxygen concentrator with a pulse flow rate of up to 6 L/min. By integrating all functions of those 20kg concentrators from other brands in a compact size, INOGI-R1 is wildly used clinically. The in-house developed “Micro Pressure Control Analysis Technique” adapts to high pressure and low temperature conditions, which supports stable use even at high altitudes (6000m) or in low temperatures (-30°C). This product has been favored among consumers due to impressive performance and affordability.
Dimenzije in embalaža: With battery cell: 17.7*7.7*19.4cm, 1.8kg
Without battery cell: 17.7*7.7*16cm, 1.3kg
INOGI-R1 is 33% smaller and 23% lighter than similar products.
Oznake: Oxygen generator, miniaturized oxygen generator, COPD, aerospace materials, in-house innovation, medical device, portable device
Proizvodna tehnologija: Backed by the in-house developed control system and an aerospace material compressor, this instrument only uses air instead of any additive to separate oxygen and nitrogen in the air, and filters out all kinds of impurities through the molecular sieve. It allows an unlimited access to oxygen at a concentration above 90% only depending upon power consumption. It comes with an efficient ARM processor that supports precise detection and fast signal processing. The in-house developed intelligent MAAS system simplifies the operation process and enables physical abnormality early warning and health advice, including breathing sensitivity control, breathing rate in-depth monitoring, and big data health management system.
Oblikovalski izziv: The release of INOGI-R1 provides a good solution for the common technical problems of China’s medical oxygen machine products, including poor stability over a long time, inefficient working of molecular sieve, high power consumption and short service life of compressor, enhances the independent innovation capacity of China’s medical oxygen generators. At present, this product has been granted 47 patents and property rights, which fills the void of subminiaturized high-altitude ultra-low temperature medical grade portable oxygen supply in China, breaking the monopoly of overseas products.
Raziskave: According to a survey, there are about 100 million patients with Chronic Obstructive Pulmonary Disease (COPD) in China, with the rate of missed diagnosis up to 70%, and most patients are often unaware of their discomfort. In this context, efforts should be made to raise the awareness of COPD and turn the scale of poor treatment. Backed by robust features, INOGI-R1 is believed to relieve the discomfort and pain caused by cardiopulmonary dysfunction.
Inspiracija: The oxygen flow rate of commercially available products is up to 5L/min, which is only suitable for patients with mild illnesses and far from attaining the desired medical effect. These deficiencies motivate us to tailor a miniaturized oxygen concentrator with a pulse flow rate of up to 6L/min for lung disease patients with inaccessible oxygen supply.
Trajanje projekta: The project commenced in Nanjing, Jiangsu in September 2018, R&D of the complete unit was done and the revolutionary product INOGI-R1 was released in April 2021, exhibited at the IF and Red Dot in April and September 2022 respectively, and also exhibited at the IDPA Exhibition in Tokyo in November 2022.
Potek delovanja: In addition to the medical field, the use of INOGI-R1 can be further extended to health care, high altitude exercises, highland travel, protection in exercise, emergency rescue, ect., and it is mainly intended for the elderly, children, pregnant women, sub-healthy white-collar workers and students. In addition, INOGI-R1 works properly at the highest altitude of 6,000m and the lowest temperature of -30℃, which immensely broadens the range of applications and scenarios. In the course of everyday use, 100W super charger is enough to keep the unit working for long hours without battery, reducing the environmental impact of battery. This instrument is continuously powered with working hours up to 6 hours after 2-hour fast charge, which can be used even in long hours of traveling. The molecular sieve and the battery can be installed and replaced with one-click operation.
Člani ekipe: Xu Xiao、Qi Yanbin