Delo Glider Počivalnik avtorja Lars Angaard Madsen je izjemno cenjeni dobitnik prestižne nagrade 2026 Železna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje pohištva.
ŽeleznaPohištvo· 2026
Glider Počivalnik
avtor/ica: Lars Angaard Madsen
Naročnik: PlanAbacus
Dobitnik nagrade Železna nagrada A' Design Award v kategoriji Pohištvo
Potrjeni dobitnik nagrade
Preverite status nagrade za #179992Dizajn
O dizajnu Glider Počivalnik
Glider je počivalnik, ki ga navdihujeta origami in lahkotnost jadralnega letala. Preklop sedeža je oblikovan iz enega samega pravokotnega lista 9 mm klobučevine iz merino volne. Ploski okvir iz nerjavečega jekla je upognjen iz enega kosa in fasetiran tako, da sledi geometriji preklopa. Cevna konzolna podnožna konstrukcija iz kromiranega ogljikovega jekla zagotavlja ravnotežje in nežno prožnost. Posebej izdelano pesto in fleksibilni vijak z vgrajenim O-tesnilom tvorita gibljiv spoj med okvirjem in podnožjem. Uporabnik lahko prevleko sedeža sam zamenja, široka naslonjala za roke pa dodajo udobje.
Priznanje
O nagradi Železna nagrada A' Design Award
Glider Počivalnik je prejemnik Železne nagrade A' Design Award, prestižnega priznanja, ki se podeljuje dobrim oblikovanjem, ki izpolnjujejo profesionalne in industrijske zahteve, pričakovane od dobro zasnovanih stvaritev. Prejemniki Železne nagrade kažejo veliko spretnost, visoko specializacijo, strokovno razumevanje in ustvarjalne zmožnosti svojih ustvarjalcev. Od Glider Počivalnik se pričakuje, da bo visoko cenjena, občudovana in ljubljena stvaritev, ki je praktična in inovativna. To oblikovanje, nagrajeno z Železno nagrado A' Design Award, vključuje najboljše prakse panoge in ima kompetentne tehnične lastnosti, povezane s strokovnim znanjem in talentom. Zaradi svoje temeljitosti si Glider Počivalnik zasluži spoštovanje in je zasnovan tako, da zagotavlja izboljšave kakovosti življenja, ki pomagajo narediti svet boljši kraj.
V ozadju dizajna
Komplet za medije
Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.
- Edinstvene lastnosti
- Glider Chair evokes images of a glider plane's aerodynamic lightness and memories of childish delight in folding a paper plane. Like origami, its basic elements are created solely through folding and bending. The focus of this project has been on ensuring a harmonious and intuitive expression, despite the chair's complexity. Made from 9 mm wool felt, the chair features a seat cover that users can easily replace themselves, potentially with a rug, highlighting the original folding principle.
- Dimenzije in embalaža
- Width 780 mm, Depth 650 mm, Height 790 mm. Weight 22 kg. Seat fold made from 9 mm Merino wool felt. Cushion made from foam. Skeleton made from aluminium. Flat metal frame made from stainless steel. Hub made from stainless steel with small rubber inserts. Tubular cantilever base made from chromium plated carbon steel.
- Oznake
- conceptual furniture, origami furniture, felt furniture, tubular cantilever chair, sheet metal furniture, lounge chair, magic carpet, rug, tassels, Superdesign Show 2025, Milano Design Week 2025, PlanAbacus, Angaard, Glider Chair, Beuys
- Proizvodna tehnologija
- Glider Chair is constructed through textile folding and precision-engineered metalwork, staying true to the origami-inspired concept. The seat-fold is shaped from a single rectangular sheet, the flat metal frame is bent from one piece and faceted to follow the fold’s geometry, and the tubular cantilever base provides balance and a gentle bounce. A custom Hub connects directly to the skeleton, and a Flex Bolt with an integrated O-ring creates a flexible, seamless joint between frame and base.
- Oblikovalski izziv
- Glider Chair is built around the tapered T-shape of the seat-fold, which demands unconventional design solutions for the chair's other parts, such as shaping the flat metal frame to follow the seat-fold as closely as possible so the chair's beauty is apparent from every angle, and designing the iconic Hub and special fittings such as the Flex Bolt to ensure strength and stability with the single rear support point. The cantilever base required its own extensive material and bending research.
- Raziskave
- Research focused on whether a folded sheet could form a self-supporting functional seat. Early tests in 4 mm grain leather explored stiffness, comfort and load, and used a Hub with a C-clamp to avoid perforation. These tests revealed the need for sheet inserts. Felt was later introduced for its aesthetic qualities and material flexibility, while the Hub evolved, now perforating the fabric. Current research includes conceptual studies toward a fully self-supporting metal mesh version.
- Inspiracija
- Inspired by origami, the aim was to design a sculptural yet comfortable chair through uncompromising folding and bending. The Beuys Series references Joseph Beuys and his symbolic use of felt, while the forthcoming Hodja Series, crafted from rugs, draws on the Danish children's tale of Hodja and his flying carpet, fulfilling the idea of folding a rug into a chair.
- Trajanje projekta
- The project began in 2009, when a paper model led to a three-week residency at the Danish Art Workshops to build the first prototype. Early versions in 4 mm grain leather explored self-supporting folding, but the design evolved as comfort and strength required a more traditional construction. The final prototype was completed in 2025 in Copenhagen and exhibited at Superdesign Show during Milano Design Week. Work now continues on a self-supporting metal mesh version.
- Potek delovanja
- The chair fits, with its blend of geometric and organic elements, both traditional and modern spaces. The wide armrest adds the presence of a fully upholstered armchair, while the merino wool keeps the body at a comfortable temperature, is self-cleaning thanks to its natural lanolin, and provides sound-absorbing qualities. The cantilever offers a gentle, natural bounce. With tassels hanging from the front, the stage is set for an open, informal and playful conversation.
- Patenti
- International Registration Number: DM/078544
Date of the international registration: 21.03.2012
Designated Contracting Parties: Switzerland (CH), European Union (EM)
Bulletin No. 12/2017 - 31.03.2017
The "Glider Chair" has earlier been named "Flyverstol" (Danish translation) and "Glider A-52"
Sponzorirano
Raziščite onkraj Designers.org
Odkrijte izdelke, storitve in priložnosti naših oglaševalskih partnerjev.
Odkrijte več
Sorodni dizajni
Raziščite več nagrajenih dizajnov iz iste kategorije, izbranih po kakovosti.
