Sprout Bicikl — аутор JunXiang Cheng and Yi Yang

Дизајн Sprout Bicikl аутора JunXiang Cheng and Yi Yang је високо цењени добитник веома престижне награде 2022 Гвоздена награда A' Design Award у категорији такмичења Дизајн 3Д штампаних форми и производа.

Гвоздена3Д штампа· 2022

Sprout Bicikl

аутор: JunXiang Cheng and Yi Yang

Клијент: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Добитник награде Гвоздена награда A' Design Award у категорији 3Д штампа

31,470

Верификовани добитник награде

Верификујте статус награде за #137286

Погледајте на A' Design Award Саопштење за медије Значка награде

Боје

Дизајн

О дизајну Sprout Bicikl

Sprout je bicikl proizveden trodimenzionalnom štampom. Rama je oblikovana pomoću topološke optimizacije, koja raspoređuje materijal samo tamo gde je potreban i smanjuje ukupnu količinu upotrebljenog materijala. Statička analiza napona metodom konačnih elemenata potvrđuje stabilnost strukture rame. Finalni model je odštampan od najlona visoke gustine. Bicikl ima dužinu od 1630 mm, širinu od 600 mm i visinu od 832 mm. Štampa eliminiše potrebu za skupim kalupima, tako da svaka rama može pratiti individualni dizajn.

Признање

О награди Гвоздена награда A' Design Award

Sprout Bicikl је добитник Гвоздене награде A' Design Award, престижног признања које се додељује добрим дизајнима који испуњавају професионалне и индустријске захтеве очекиване од добро осмишљених творевина. Добитници Гвоздене награде показују велико умеће, високу специјализацију, стручно разумевање и креативне способности својих твораца. Очекује се да Sprout Bicikl буде високо цењена, дивљена и вољена творевина која је практична и иновативна. Овај дизајн награђен Гвозденом наградом A' Design Award уграђује најбоље праксе индустрије и има компетентна техничка својства повезана са знањем и талентом. Захваљујући темељности, Sprout Bicikl заслужује поштовање и осмишљен је да пружи побољшања квалитета живота која помажу да свет буде бољи.

Иза дизајна

Комплет за медије

Заслуге, чланови тима и технички детаљи које је обезбедио дизајнер.

Јединствене карактеристике: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Димензије и паковање: Length 1630mm, width600mm, height 832mm
Ознаке: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Технологија производње: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Дизајнерски изазов: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Истраживање: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Инспирација: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Трајање пројекта: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Ток рада: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Чланови тима: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao