Hydrospine Баласт За Роњење — аутор Ludovic Lahccen and Raoul Morel

Дизајн Hydrospine Баласт За Роњење аутора Ludovic Lahccen and Raoul Morel је високо цењени добитник веома престижне награде 2023 Сребрна награда A' Design Award у категорији такмичења Дизајн спортске опреме, фитнес и рекреативне опреме.

СребрнаСпортска опрема· 2023

Hydrospine Баласт За Роњење

аутор: Ludovic Lahccen and Raoul Morel

Клијент: Apnea Sub

Добитник награде Сребрна награда A' Design Award у категорији Спортска опрема

755,954

Верификовани добитник награде

Верификујте статус награде за #148412

Посетите сајт Погледајте на A' Design Award Саопштење за медије Значка награде

Боје

Дизајн

О дизајну Hydrospine Баласт За Роњење

Систем утега за роњење на дах, који омогућава ултра прецизну равнотежу и пловност. Његове предности, модуларни и брзи капацитет носивости, до 6 кг, употребљив у било ком положају, било којој дисциплини роњења. Опремљен је копчама за брзо отпуштање и подешавање за прилагођавање различитим величинама, без обзира на пол, нудећи невероватну удобност због које брзо заборавите на тежину коју носите. Његов дизајн потиче од фузије морских животиња и опреме створене за брзину да би му дала веома хидродинамичне линије и понудила оптимално клизање под водом. Његова свестраност чини га јединственим концептом

Признање

О награди Сребрна награда A' Design Award

Hydrospine Баласт За Роњење је добитник Сребрне награде A' Design Award, изузетно престижног признања које се додељује врхунским, предивним и импресивним дизајнима. Добитници Сребрне награде неизмерно су бриљантна и изузетно креативна дела која илуструју изузетну стручност, таленат и оштроумност својих дизајнера. Очекује се да Hydrospine Баласт За Роњење буде дивно, узорно дело, запажено професионално и дубоко иновативно. Овај дизајн награђен Сребрном наградом A' Design Award веома је запажен, дивљен изум који користи и помера границе уметности, науке, дизајна и технологије. Hydrospine Баласт За Роњење је творевина којој многи завиде, која буди жеље, доноси позитивна осећања и изазива чуђење и дивљење.

Иза дизајна

Комплет за медије

Заслуге, чланови тима и технички детаљи које је обезбедио дизајнер.

Јединствене карактеристике: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Димензије и паковање: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Ознаке: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Технологија производње: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Дизајнерски изазов: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Истраживање: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Инспирација: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Трајање пројекта: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Ток рада: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Патенти: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Чланови тима: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Заслуге за фотографије: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel