Inogi R1 Koncentrator kiseonika — аутор Xiao Xu and Qi Yanbin

Дизајн Inogi R1 Koncentrator kiseonika аутора Xiao Xu and Qi Yanbin је високо цењени добитник веома престижне награде 2023 Сребрна награда A' Design Award у категорији такмичења Дизајн медицинских уређаја и медицинске опреме.

СребрнаМедицински производ· 2023

Inogi R1 Koncentrator kiseonika

аутор: Xiao Xu and Qi Yanbin

Клијент: Nanjing Yinuoji Medical Technology Co., Ltd.

Добитник награде Сребрна награда A' Design Award у категорији Медицински производ

145,264

Верификовани добитник награде

Верификујте статус награде за #149906

Погледајте на A' Design Award Саопштење за медије Значка награде

Боје

Дизајн

О дизајну Inogi R1 Koncentrator kiseonika

Inogi R1 je minijaturizovani koncentrator kiseonika za medicinsku upotrebu. Uređaj isporučuje pulsni protok do 6 litara u minuti. Inogi R1 izdvaja kiseonik iz vazduha pomoću molekularnog sita, tako da nisu potrebni nikakvi aditivi, i postiže koncentraciju kiseonika iznad 90 procenata. Kontrolni sistem razvijen u sopstvenoj režiji održava stabilan rad na nadmorskim visinama do 6000 metara i na temperaturama do minus 30 stepeni Celzijusa. Sa baterijom, uređaj ima dimenzije 17,7 x 7,7 x 19,4 centimetra i teži 1,8 kilograma. Molekularno sito i baterija mogu se zameniti u jednom koraku.

Признање

О награди Сребрна награда A' Design Award

Inogi R1 Koncentrator kiseonika је добитник Сребрне награде A' Design Award, изузетно престижног признања које се додељује врхунским, предивним и импресивним дизајнима. Добитници Сребрне награде неизмерно су бриљантна и изузетно креативна дела која илуструју изузетну стручност, таленат и оштроумност својих дизајнера. Очекује се да Inogi R1 Koncentrator kiseonika буде дивно, узорно дело, запажено професионално и дубоко иновативно. Овај дизајн награђен Сребрном наградом A' Design Award веома је запажен, дивљен изум који користи и помера границе уметности, науке, дизајна и технологије. Inogi R1 Koncentrator kiseonika је творевина којој многи завиде, која буди жеље, доноси позитивна осећања и изазива чуђење и дивљење.

Иза дизајна

Комплет за медије

Заслуге, чланови тима и технички детаљи које је обезбедио дизајнер.

Јединствене карактеристике: INOGI-R1 is the first medical grade miniaturized oxygen concentrator with a pulse flow rate of up to 6 L/min. By integrating all functions of those 20kg concentrators from other brands in a compact size, INOGI-R1 is wildly used clinically. The in-house developed “Micro Pressure Control Analysis Technique” adapts to high pressure and low temperature conditions, which supports stable use even at high altitudes (6000m) or in low temperatures (-30°C). This product has been favored among consumers due to impressive performance and affordability.
Димензије и паковање: With battery cell: 17.7*7.7*19.4cm, 1.8kg
Without battery cell: 17.7*7.7*16cm, 1.3kg
INOGI-R1 is 33% smaller and 23% lighter than similar products.
Ознаке: Oxygen generator, miniaturized oxygen generator, COPD, aerospace materials, in-house innovation, medical device, portable device
Технологија производње: Backed by the in-house developed control system and an aerospace material compressor, this instrument only uses air instead of any additive to separate oxygen and nitrogen in the air, and filters out all kinds of impurities through the molecular sieve. It allows an unlimited access to oxygen at a concentration above 90% only depending upon power consumption. It comes with an efficient ARM processor that supports precise detection and fast signal processing. The in-house developed intelligent MAAS system simplifies the operation process and enables physical abnormality early warning and health advice, including breathing sensitivity control, breathing rate in-depth monitoring, and big data health management system.
Дизајнерски изазов: The release of INOGI-R1 provides a good solution for the common technical problems of China’s medical oxygen machine products, including poor stability over a long time, inefficient working of molecular sieve, high power consumption and short service life of compressor, enhances the independent innovation capacity of China’s medical oxygen generators. At present, this product has been granted 47 patents and property rights, which fills the void of subminiaturized high-altitude ultra-low temperature medical grade portable oxygen supply in China, breaking the monopoly of overseas products.
Истраживање: According to a survey, there are about 100 million patients with Chronic Obstructive Pulmonary Disease (COPD) in China, with the rate of missed diagnosis up to 70%, and most patients are often unaware of their discomfort. In this context, efforts should be made to raise the awareness of COPD and turn the scale of poor treatment. Backed by robust features, INOGI-R1 is believed to relieve the discomfort and pain caused by cardiopulmonary dysfunction.
Инспирација: The oxygen flow rate of commercially available products is up to 5L/min, which is only suitable for patients with mild illnesses and far from attaining the desired medical effect. These deficiencies motivate us to tailor a miniaturized oxygen concentrator with a pulse flow rate of up to 6L/min for lung disease patients with inaccessible oxygen supply.
Трајање пројекта: The project commenced in Nanjing, Jiangsu in September 2018, R&D of the complete unit was done and the revolutionary product INOGI-R1 was released in April 2021, exhibited at the IF and Red Dot in April and September 2022 respectively, and also exhibited at the IDPA Exhibition in Tokyo in November 2022.
Ток рада: In addition to the medical field, the use of INOGI-R1 can be further extended to health care, high altitude exercises, highland travel, protection in exercise, emergency rescue, ect., and it is mainly intended for the elderly, children, pregnant women, sub-healthy white-collar workers and students. In addition, INOGI-R1 works properly at the highest altitude of 6,000m and the lowest temperature of -30℃, which immensely broadens the range of applications and scenarios. In the course of everyday use, 100W super charger is enough to keep the unit working for long hours without battery, reducing the environmental impact of battery. This instrument is continuously powered with working hours up to 6 hours after 2-hour fast charge, which can be used even in long hours of traveling. The molecular sieve and the battery can be installed and replaced with one-click operation.
Чланови тима: Xu Xiao、Qi Yanbin