Arch Setulo, Setulo se se nang Mokokotlo ka Edvard Glazebrook

Moralo oa Arch Setulo, Setulo se se nang Mokokotlo ka Edvard Glazebrook ke mohlodi oa khau e hlomphehang haholo ya 2021 Moputso oa Boronse oa A' Design Award Mokhahleong oa Tlhodisano oa Moralo wa Fenitjhara.

BoronseFenitjhara· 2021

Arch Setulo, Setulo se se nang Mokokotlo

ka Edvard Glazebrook

Mohlodi oa Moputso oa Boronse oa A' Design Award Mokhahleong oa Fenitjhara

11,029

Mohlodi oa Khau ea Netefaditsweng

Netefatsa Boemo ba Khau bakeng sa #106853

Sheba ho A' Design Award Tokollo ya Boraditaba Baeche ya Moputso

Mebala

Moralo

Mabapi le Arch Setulo, Setulo se se nang Mokokotlo

Arch ke setulo le sedulo se se nang mokokotlo se entsoeng ka lehong la pine le betliloeng le le nang le 'mala o motsho o kopantsoeng ka makhasi. Moralo ona o thehiloe holim'a mefuta e bonolo le e phetahaloang, e fanang ka setulo se hlalosang ka tsela e le 'ngoe le e utloahalang. Liarch tse tšoanang tse hlano li theha maoto le mokokotlo oa setulo, ha sedulo se se nang mokokotlo sona se entsoe ka liarch tse tharo tse halofo tse kopanang bohareng. Likarolo tsohle li khaotsoe ho tsoa polangoeng ea lehong e kopantsoeng ka sesebelisoa sa CNC router, joale tsa khomarelloa le ho kopanngoa ka lipina tsa lehong. Mekhoa ea ho koba e matlafatsa thepa eo libakeng tsa eona tse fokolang.

Kamohelo

Mabapi le Moputso oa Boronse oa A' Design Award

Arch Setulo, Setulo se se nang Mokokotlo ke mohapi oa Moputso oa Boronse oa A' Design Award, kananelo e hlomphehang haholo e fuoang meralo e ikhethang e tsejoang ka boqapi, bohlale ba ho qapa le bohlale. Bahapi ba Boronse ke lintho tse nang le bokhoni ka ho felletseng le boqapi bo hlollang tse tiisang boiphihlelo bo bongata, mohopolo le bokhoni ba ho iphumana ba baqapi ba tsona. Arch Setulo, Setulo se se nang Mokokotlo e lebelletsoe ho ba ntho e hlomphuoang haholo, e ratoang le e ratehang, e nang le boprofeshenale bo bonahalang le mehopolo e mecha. Moralo ona o hapileng Moputso oa Boronse oa A' Design Award o kenyelletsa mekhoa e metle ka ho fetesisa bonong, mahlaleng, moralong le theknolojing mme o hlahella ka ho tsepamisa maikutlo lintlheng tse nyenyane. Arch Setulo, Setulo se se nang Mokokotlo e kutloisisa litlhoko hantle, e ama litakatso, e hapa maikutlo mme e tsosa takatso ea ho tseba.

Ka Mora Moralo

Sete ya Boraditaba

Litlhaku, ditho tsa sehlopha le lintlha tsa botekgeniki tse fanoeng ke moetsi wa moralo.

Boleng bo Ikhethang: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Boholo le Phuthelo: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Lithegi: Wood, Chair, Stool, Pine wood, Arches, Curve
Theknoloji ya Tlhahiso: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Phephetso ya Moralo: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Dipatlisiso: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Kgothaletso: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Nako ya Projeke: The project started in march 2020 - and finished in late May 2020.
Tsamaiso ya Mosebetsi: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Diphatente: Copyrights belong to Edvard Glazebrook, 2020
Litho tsa Sehlopha: Edvard Glazebrook