Project Clipmouse Mouse ya Khomphutha e Menahanang ka Kevin Yang

Moralo oa Project Clipmouse Mouse ya Khomphutha e Menahanang ka Kevin Yang ke mohlodi oa khau e hlomphehang haholo ya 2026 Moputso oa Boronse oa A' Design Award Mokhahleong oa Tlhodisano oa Moralo wa Dikhomphyutha le Disebediswa tse Hlokehang.

BoronseKhomphyutha· 2026

Project Clipmouse Mouse ya Khomphutha e Menahanang

ka Kevin Yang

Mohlodi oa Moputso oa Boronse oa A' Design Award Mokhahleong oa Khomphyutha

5,237

Mohlodi oa Khau ea Netefaditsweng

Netefatsa Boemo ba Khau bakeng sa #182448

Sheba ho A' Design Award Tokollo ya Boraditaba Baeche ya Moputso

Mebala

Moralo

Mabapi le Project Clipmouse Mouse ya Khomphutha e Menahanang

Projeke ya Clipmouse ke mouse e se nang mohala e tshesane haholo e menahanang, e etseditsweng basebedisi ba tshwarang ka ntlha tsa menwana. Matsoho a trigger a menahanang a fokotsa bophahamo ba yona ha e mennwe ho fihla ho dimilimetara tse 10, ha sebopeho sa yona ha e phutholotswe se kgutlisetsa sebopeho se tlwaelehileng sa mouse. Mokgwa wa tilt shift o nang le cam ya sebopeho sa lerothodi le mokotlana o thellang o nang le spring o etsisa tsamao ya konopo le karabelo e hlakileng ya di-microswitch tse tlwaelehileng. Diboto tse pedi tsa potoloho tse pakilweng hodima tse ding tse hokahantsweng ka potoloho e hatisitsweng e menahanang di boloka bokahare bo le bonyane. Ntlo e bonaletsang e siya moralo wa kahare o bonahala, mme dikarolo tse nyane tsa bohlokwa di ka nkelwa sebaka.

Kamohelo

Mabapi le Moputso oa Boronse oa A' Design Award

Project Clipmouse Mouse ya Khomphutha e Menahanang ke mohapi oa Moputso oa Boronse oa A' Design Award, kananelo e hlomphehang haholo e fuoang meralo e ikhethang e tsejoang ka boqapi, bohlale ba ho qapa le bohlale. Bahapi ba Boronse ke lintho tse nang le bokhoni ka ho felletseng le boqapi bo hlollang tse tiisang boiphihlelo bo bongata, mohopolo le bokhoni ba ho iphumana ba baqapi ba tsona. Project Clipmouse Mouse ya Khomphutha e Menahanang e lebelletsoe ho ba ntho e hlomphuoang haholo, e ratoang le e ratehang, e nang le boprofeshenale bo bonahalang le mehopolo e mecha. Moralo ona o hapileng Moputso oa Boronse oa A' Design Award o kenyelletsa mekhoa e metle ka ho fetesisa bonong, mahlaleng, moralong le theknolojing mme o hlahella ka ho tsepamisa maikutlo lintlheng tse nyenyane. Project Clipmouse Mouse ya Khomphutha e Menahanang e kutloisisa litlhoko hantle, e ama litakatso, e hapa maikutlo mme e tsosa takatso ea ho tseba.

Ka Mora Moralo

Sete ya Boraditaba

Litlhaku, ditho tsa sehlopha le lintlha tsa botekgeniki tse fanoeng ke moetsi wa moralo.

Boleng bo Ikhethang: Project Clipmouse is an ultra-slim, lightweight tri-mode wireless mouse engineered around a proprietary tilt‑shift mechanism, for which patent applications are currently pending.

Designed specifically for fingertip grip users, it represents a new exploration in foldable mouse design: its collapsible left and right trigger panels compress the overall profile to a mere 1 cm in its folded state.

Its click actuation system is built upon the same proprietary tilt‑shift architecture, utilizing a teardrop‑shaped cam and spring‑loaded sliding sleeve to faithfully reproduce the key travel and crisp tactile feedback characteristic of conventional microswitches.
Boholo le Phuthelo: When Folded: 60mm (W) x 75mm (L) x 10mm (H)
When Expand: 60mm (W) x 75mm (L) x 28mm (H)

Apx Min. Trigger force: (65 Plus and Minus 15 gf)
Maximum trigger arm angle: 0 - 130 Degrees
Lithegi: Mouse, Portable, CLIPMOUSE, Everyday Carry
Theknoloji ya Tlhahiso: The design integrates core components: nRF52810 (QFAA package, miniaturized for space efficiency) and PMW3360DM (compact 16-PDIP package) to deliver superior hardware performance within extreme constraints.

A stacked dual-PCB assembly is used in design - main HDI PCB hosts nRF52810/PMW3360DM, auxiliary PCB accommodates IC touch sensor to mimic the scroll wheel - interconnected via FPC for compact, reliable signal transmission.

The PCBA design is targeted to miniaturize PCB with minimal component packaging, optimizes space utilization. Components are mainly injection molded and a transparent housing showcase the exposed PCBA (refined trace routing, compact packaging) as a CMF visual element.

Omron orange series microswitches (60gf +- 10gf actuation force) ensure crisp feedback; standard replaceable bearings and springs enhance maintainability.

Project Clipmouse merges miniaturized components, FPC-connected stacked PCBs, and visible PCBA, balancing performance, space efficiency, and industrial aesthetics via injection molding and transparent enclosure design.
Phephetso ya Moralo: The hardest part of Project CLIPMOUSE was addressing three core challenges, with high-speed circuit stability being the most intractable.

First, optimizing microswitch placement for the slim, angled trigger design was solved by a newly developed tilt-shift trigger system: a cam gear on the rotating axis pushes a spring-loaded slide bar, converting rotational force into direct force to actuate the switch, reducing friction and ensuring consistent reset.

Second, fitting all components into an extremely compact space was overcome through multiple analog circuit tests and selecting/testing minimal component packages.

The partially resolved challenge is high-speed circuit stability: as a non-professional in high-speed circuit design, strict adherence to routing specifications and partial auto-routing still led to interference in the ultra-compact space.

Prototypes are usable aesthetically refined, but commercial-level anti-interference requires professional packet transmission and layout - needing expertise in high-speed circuit design and software engineering. (Most branded tri-mode mouse have its own packet and de-pack system to avoid channel interference)

External factors (such as limited professional knowledge, compact space constraints) and internal factors (personal design capability limits) posed key obstacles, while production possibilities are confirmed via prototypes, Project Clipmouse still needs professional refinements to truly be ready for market.
Dipatlisiso: Research Objectives: To design an ultra-thin foldable mouse (CLIPMOUSE) balancing portability, ergonomics and hardware performance; confirm optimal length, width, height and trigger arm angle via ergonomic verification; optimize PCBA layout under space constraints; and ensure ideal actuation force.

Methodology: Iterative design research, combining ergonomic testing, hardware design reference, 3D-printed prototype validation, and microswitch selection testing to continuously adjust and optimize the product.

Data Collection and Tools: Ergonomic data via angle measuring tools and user experience; PCBA design referenced Nordic Semiconductor’s design manual, assisted by PCB layout software (JLCEDA & Easy Routing); 3D printing used for prototype validation; microswitch testing for actuation force.

Participants/Experiments: Tested 3D-printed prototypes with different sizes/trigger angles; 23 microswitch types from various manufacturers were tested to confirm optimal actuation force; PCBA performance verified against Nordic’s specifications(Design based on their recommended minimal MCU system).

Results: Optimal dimensions and trigger angle confirmed; 3D printing ensured prototype feasibility; 1 optimal microswitch (Omron orange, 60gf) selected; stacked dual-PCB (FPC-connected) optimized via Nordic’s manual.

Insights/Impacts: 3D printing accelerates prototype validation; diverse microswitch testing ensures user comfort; professional manuals boost design stability; portability and ergonomics can be balanced.

Each and every validation process meets mobile office needs, and servicing for foldable peripheral innovation, and provides a balance between portability, comfort and performance.
Kgothaletso: Inspiration for Clipmouse derives directly from its name: an abstract reinterpretation of the mousetrap mechanism. Driven by the mechanical clarity and instantaneous actuation of such structures, the design translates this operational logic into an ultra-thin, portable mouse.

Consistent with the core design philosophy, CMF and functional components contribute to the visual narrative. The PCB architecture and proprietary tilt-shift mechanism are intentionally exposed, rather than concealed as internal infrastructure.
Nako ya Projeke: The project started in October 2025 in Bangkok, passed Proof of Concept (PoC) in January 2026, and final validating prototype in March 2026. Currently undergoing patent process in china.
Tsamaiso ya Mosebetsi: This mouse is unique but natural to operate - simply unfold and expand the trigger arms to use it, and the operation is straightforward. It can be folded into a compact size, making it easy to carry around; when unfolded, it restores to a normal mouse shape that fits daily use.

The key part is that it can be folded to save space, while keeping the ergonomics almost the same as a normal mouse. Its transparent shell lets you see the internal structure clearly.

Its click mechanism responds smoothly to light fingertip pressure, giving a firm, satisfying feel with every press, and key small components can be easily replaced if needed.

It is a great alternative for a thinner, lighter, and more portable mouse experience - fitting in pockets or small bags just like a mini pack of cigarettes.
Diphatente: Currently undergoing patent process in china.