Moralo oa Dond Tafole E Tlase ka Jinyang Koo ke mohlodi oa khau e hlomphehang haholo ya 2020 Moputso oa Boronse oa A' Design Award Mokhahleong oa Tlhodisano oa Moralo wa Fenitjhara.

BoronseFenitjhara· 2020

Dond Tafole E Tlase

ka Jinyang Koo

Moreki: Wuui

Mohlodi oa Moputso oa Boronse oa A' Design Award Mokhahleong oa Fenitjhara

17,687

Mohlodi oa Khau ea Netefaditsweng

Netefatsa Boemo ba Khau bakeng sa #88288

Etela Sebaka Sheba ho A' Design Award Tokollo ya Boraditaba Baeche ya Moputso

Mebala

Moralo

Mabapi le Dond Tafole E Tlase

Tlaleho ea moralo oa Dond e bonolo ebile e tenyetseha. Likarolo tse bonolo tsa ho kopanya li etsa hore ho sebelisoe mochini oa printa oa 3D, 'me likarolo tse nyane li rala e le hore moreki a ka bokella tafole kapa a kopane ho ea tsamaisa nakong ea lipalangoang. Morero oa moqapi e ne e le hore Dond e nke karolo ea mohoebi ka litlhoko tsa letsatsi le letsatsi ho thabela bophelo bo bobebe bakeng sa ketsahalo efe kapa efe ka ntle kapa kantle. Dond e sebelisa mokhoa o otlolohileng oa sebopeho joalo ka bokaholimo bo sa kenngoe maotong mme e tlosoa habonolo ho e sebelisa joalo ka teraka.

Kamohelo

Mabapi le Moputso oa Boronse oa A' Design Award

Dond Tafole E Tlase ke mohapi oa Moputso oa Boronse oa A' Design Award, kananelo e hlomphehang haholo e fuoang meralo e ikhethang e tsejoang ka boqapi, bohlale ba ho qapa le bohlale. Bahapi ba Boronse ke lintho tse nang le bokhoni ka ho felletseng le boqapi bo hlollang tse tiisang boiphihlelo bo bongata, mohopolo le bokhoni ba ho iphumana ba baqapi ba tsona. Dond Tafole E Tlase e lebelletsoe ho ba ntho e hlomphuoang haholo, e ratoang le e ratehang, e nang le boprofeshenale bo bonahalang le mehopolo e mecha. Moralo ona o hapileng Moputso oa Boronse oa A' Design Award o kenyelletsa mekhoa e metle ka ho fetesisa bonong, mahlaleng, moralong le theknolojing mme o hlahella ka ho tsepamisa maikutlo lintlheng tse nyenyane. Dond Tafole E Tlase e kutloisisa litlhoko hantle, e ama litakatso, e hapa maikutlo mme e tsosa takatso ea ho tseba.

Ka Mora Moralo

Sete ya Boraditaba

Litlhaku, ditho tsa sehlopha le lintlha tsa botekgeniki tse fanoeng ke moetsi wa moralo.

Boleng bo Ikhethang: Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
Boholo le Phuthelo: Top: 330mmx330mmx15mm
Overall Height: 415mm
Lithegi: Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
Theknoloji ya Tlhahiso: The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
Phephetso ya Moralo: Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
Dipatlisiso: During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
Kgothaletso: The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
Nako ya Projeke: The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
Tsamaiso ya Mosebetsi: Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.

Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location.
Litho tsa Sehlopha: JINYANG KOO