Airwood Drönarbyggsats av Uavi Technology

Designen Airwood Drönarbyggsats av Uavi Technology är en högt ansedd vinnare av den mycket prestigefyllda 2020 A' Design Award i Järn i tävlingskategorin Leksaks-, Spel- och Hobbyproduktdesign.

JärnLeksak· 2020

Airwood Drönarbyggsats

av Uavi Technology

Klient: UAVI Technology (Shen Zhen) Limited

Vinnare av A' Design Award i Järn i kategorin Leksak

17,987

Verifierad prisvinnare

Verifiera prisstatus för #103852

Besök webbplats Visa hos A' Design Award Pressmeddelande Utmärkelsemärke

Färger

Designen

Om Airwood Drönarbyggsats

Airwood är en monteringsbar drönarbyggsats designad för både barn och vuxna. Fyraxeldrönaren har en ram tillverkad av kompositlindträ, skuret i tunna två millimeter tjocka bitar med en laserskärare. Användarna monterar träskivorna och elektronikkomponenterna för hand för att bygga både drönaren och fjärrkontrollen. Modulära styrenheter, motorer och batterier gör det möjligt att skapa flera olika ramar och utseenden från ett och samma set. Drönaren stödjer inomhussvävning, flygfotografering och grafisk programmering. Det certifierade träet minskar användningen av plast och metall.

Erkännandet

Om A' Design Award i Järn

Airwood Drönarbyggsats är vinnare av A' Design Award i Järn, ett prestigefyllt erkännande som tilldelas bra designverk som uppfyller de professionella och industriella krav som förväntas av välgjorda skapelser. Järnvinnare visar stor skicklighet, hög specialisering, expertförståelse och skaparnas kreativa förmåga. Airwood Drönarbyggsats förväntas vara en högt skattad, beundrad och älskad skapelse som är praktisk och innovativ. Detta vinnande verk i A' Design Award i Järn integrerar branschens bästa praxis och har kompetenta tekniska egenskaper kopplade till kunnande och talang. Airwood Drönarbyggsats respekteras för sin grundlighet och är utformat för att åstadkomma förbättringar av livskvaliteten som hjälper till att göra världen till en bättre plats.

Bakom designen

Presskit

Erkännanden, teammedlemmar och tekniska detaljer tillhandahållna av designern.

Unika egenskaper: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Dimensioner & förpackning: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Taggar: Drone, Wood, DIY, Modularity, Programmable
Produktionsteknik: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Designutmaning: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Forskning: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Inspiration: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Projektlängd: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Arbetsflöde: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Patent: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Bildkrediteringar: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.