EnGo Batterihölje by Vladimir Zagorac is a highly esteemed winner of the very prestigious 2022 A' Design Award i Brons in Energiprodukt-, Projekt- och Enhetsdesign Competition Category.

BronsEnergi· 2022

EnGo Batterihölje

by Vladimir Zagorac

Client: EnGo Planet

A' Design Award i Brons Winner in Energi Category

30,956

Verified Award Winner

Verify Award Status for #108261

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About EnGo Batterihölje

EnGo är ett portabelt batterihölje utformat för användning i 12V- och 24V-soldrivna gatlyktor, smarta bänkar och andra eldrivna produkter. Det kompakta höljet får plats i en hand och kan staplas i flera riktningar, så att kablar och kontakter kan dras mellan enheterna. Ett löstagbart handtag underlättar bärande och placering och kan förvaras inuti höljet när det inte används. Anslutningslocken kan dras åt för hand eller med en insexnyckel. Drift och batterikapacitet kan övervakas via smartphone genom Bluetooth. Höljet är tillverkat av formsprutad polymer.

The Recognition

About the A' Design Award i Brons

EnGo Batterihölje är vinnare av A' Design Award i Brons, ett högst prestigefyllt erkännande som tilldelas enastående designverk som utmärker sig genom kreativitet, uppfinningsrikedom och klokhet. Bronsvinnare är mycket skickliga och slående kreativa föremål som styrker formgivarnas stora erfarenhet, fantasi och påhittighet. EnGo Batterihölje förväntas vara ett högt skattat, beundrat och älskat föremål som är anmärkningsvärt professionellt och innovativt. Detta vinnande verk i A' Design Award i Brons införlivar bästa praxis inom konst, vetenskap, design och teknik och är utmärkt genom sin omsorg om detaljer. EnGo Batterihölje tillfredsställer fantastiskt behov, rör vid längtan, charmar känslor och väcker nyfikenhet.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: The battery case is minimalistic and contemporary, portable, and fits in one hand, stackable, easily operated, and customizable. The design implements large radii and beveled edges to maximally save space, allowing the cables and connectors to fall between the cases. The cooling opening accepts a detachable multifunctional handle. The battery terminal caps can be tightened by both a hand and an Allen key. The operation and battery capacity can be monitored by a smartphone via Bluetooth.
Dimensions & Packaging: Height: 310mm, Width: 125mm, Depth: 68mm (without the handle)
Tags: Smart Battery, Power Bank, Portable, Stackable, Multifunctional, Customizable
Production Technology: Injection-molded polymer, bent chrome-plated rod
Design Challenge: Intended multifunctionality required the handle to be used to carry and lower or pull up the battery in or out of position in large sets. The solution is flexible and can easily be inserted into the carrying position, held in place by outward-bent ends. It can be removed or slipped safely inside the housing when not in use and can carry two units at the same time if needed. Safe stackability was achieved through two pairs of recesses on the upper side, one pair being the terminal cap recesses.
Research: The case was planned for 12V & 24V solar light poles and Smart benches, as well as an individual product, but also for differently orientable sets within high-end solutions of other manufacturers, like power wall and power bank products, electric vehicles, yachts, etc. For that reason, the positions of the terminals are customizable during production to fit the product's intention or depending on the type of set, also enabling easier connection and usage of cables of short or uniform length.
Inspiration: The design project was initiated after lithium was found in a deposit in Serbia. Among battery-operated products are EnGo Planet solutions, so it was expected that the company would invest in the development of housings for lithium-based batteries. The end product would be used in the company's solar solutions or marketed separately for other usages.
Project Duration: The project lasted several weeks and took place in Belgrade, Serbia.
Operation Flow: One unit is a portable smart battery, while a set can be oriented in several ways for different usages in other products. Rotating a case can pair up a set into a hexagonal vertical composition suitable for placement inside a light pole. A large number of units can be stacked into a rectangular composition for other usages, allowing cables of up to 10mm in diameter to be routed horizontally, and MC4 solar connectors 19mm in diameter to be routed vertically between the units.
Image Credits: Vladimir Zagorac