SS2019 Splash Silicone Rubber Clothing Modeplagg av Viktoria Marchev

Designen SS2019 Splash Silicone Rubber Clothing Modeplagg av Viktoria Marchev är en högt ansedd vinnare av den mycket prestigefyllda 2021 A' Design Award i Silver i tävlingskategorin Mode-, Kläd- och Plaggdesign.

SilverMode· 2021

SS2019 Splash Silicone Rubber Clothing Modeplagg

av Viktoria Marchev

Klient: Viktoria Marchev

Vinnare av A' Design Award i Silver i kategorin Mode

64,942

Verifierad prisvinnare

Verifiera prisstatus för #110147

Besök webbplats Visa hos A' Design Award Pressmeddelande Utmärkelsemärke

Färger

Designen

Om SS2019 Splash Silicone Rubber Clothing Modeplagg

'Splash' är en kollektion tillverkad av silikongummi, ett mångsidigt material som designern har använt för att skapa sina sci-fi-ambiens koncept sedan 2014. Designern utvecklade en speciell gjutformteknik för att konstruera sina silikonplagg. De skapade plaggen är mycket miljövänliga eftersom det inte uppstår något avfall under skapandeprocessen och de är också vattentäta och lätta att rengöra. Titeln 'splash' hänvisar till tekniken, som innebär att vatten injiceras mellan lager av silikon.

Erkännandet

Om A' Design Award i Silver

SS2019 Splash Silicone Rubber Clothing Modeplagg är vinnare av A' Design Award i Silver, ett utomordentligt prestigefyllt erkännande som tilldelas förstklassiga, hänförande och imponerande designverk i toppskiktet. Silvervinnare är oerhört briljanta och utomordentligt kreativa verk som illustrerar sina formgivares enastående expertis, talang och skarpsinne. SS2019 Splash Silicone Rubber Clothing Modeplagg förväntas vara ett underbart paradexempel som är anmärkningsvärt professionellt och djupt innovativt. Detta vinnande verk i A' Design Award i Silver är en mycket uppmärksammad, beundrad uppfinning som gagnar och flyttar fram gränserna för konst, vetenskap, design och teknik. SS2019 Splash Silicone Rubber Clothing Modeplagg är en skapelse som avundas starkt, som väcker längtan, förmedlar positiva känslor och väcker förundran och häpnad.

Bakom designen

Presskit

Erkännanden, teammedlemmar och tekniska detaljer tillhandahållna av designern.

Unika egenskaper: The designer has been experimenting with silicone rubber since 2014. The molding-casting technology requires precise preparation, the emphasis is more on the design process, as the making itself is limited to the time of pouring. Splash is an advanced version of the Spring-Summer 2015 Clones, which earned the designer the category of innovative designers on Not Just A Label. The title Splash refers to the technology which involves liquid being injected between layers of silicone.
Dimensioner & förpackning: There are 18 looks within the collection, sizes ranging from bodysuits, short dresses and one long dress.
Bodysuits: Body length: 60 cm, bust: 70 cm, waist: 60 cm, weight: 4 lb,
Short dress: Length: 70 cm, bust: 70 cm, waist: 60 cm, hips: 80 cm, weight: 4 lb
Yellow dress: Overall length: 135 cm, bust: 70 cm, waist: 60 cm, hips: 80 cm, weight: 14 lb
Taggar: fashion, apparel silicone, rubber, innovation, sci-fi
Produktionsteknik: Silicone rubber
Molding-casting
Pouring
Designutmaning: After several years of experimentation mostly on swimwear, one of the biggest challenges in this collection was to make a big-scale piece. An attractive yellow dress with a huge round skirt and circle "cutouts". The designer faced the challenge to find balance between strength and fragility. Because of the shortness of the curing time of silicone rubber and the size of the project the design itself needed a lot of attention as minor mistakes could result in repeating the whole making process.
Forskning: The designer has been experimenting with silicone rubber for a couple of collections (5 silicone rubber collections so far), trying something new each season to come. Innovations in each collection:

SS2015 Clones - first silicone rubber collection - the foundation of the technology
SS2017 Skin Deep - introducing transparent hard silicone vests
FW2017 In the cocoon - expanding the volume to big-scale pieces
SS2018 Splash - injecting water between layers of silicone to create the ‘splash’ effect
FW2019 Possession - complete, multiple-piece outfits made of silicone rubber, including footwear
Inspiration: The designer loves to define garments as an abstract extension of the human body. For this particular collection the designer drew inspiration from her personal experiences learning about the importance of water within the healthy functioning of the body, how it impacts blood structure. She expressed it in two ways: using circles and injecting water and other colorful liquids between layers of silicone as a symbolic representation of this healthy flow.
Projektlängd: The development of the technology started in 2014 with the designer's first silicone rubber collection Spring-Summer 2015 Clones and has been upgraded every year. Splash conceived in 2018 and was completed in August, 2018 and was showcased at New York Fashion Week in the framework of Oxford Fashion Studio's Emerging Designer Showcase in September at Pier59 Studios.
Arbetsflöde: The pieces made of silicone rubber do not require any sewing, therefore there are no real seams or trimmings, which creates a very neat appearance. The pieces are simultaneously flexible and have a strong hold, which feature eliminates wrinkles. The cleaning of the pieces is highly-efficient as the surface is waterproof, they don't require machine wash, can be wiped off with light detergents, alcohol for disinfection and can be patted dry with paper towel or any water absorbent cloth. The same way the pouring process allows no waste during the production as there is no excess material in the mold.
Patent: Patent No.
Teammedlemmar: Viktoria Marchev (Viktoria Tisza at the time of the creation)
Bildkrediteringar: Runway photography and videography: Oxford Fashion Studio
Main image photography: Charles Hundley, The Runway Authority
Runway model for main image: Dani Le Rose/Dani Rook
Runway model for Optional Image #1: Hanasha Ch.
Runway model for Optional Image #2: Tifannie Kramer
Runway model for Optional Image #3: Stephanie Bardavid
Runway model for Optional Image #4: Mimi Tao

Additional documentation - Campaign
Photography: Dobrin Marchev www.dobrinmarchev.com
Model: Ana Eberg @Red Model Management
Make-up: Anastasia Eisenberg