C3 Sterilization Sinki la Jikoni by Nuomi is a highly esteemed winner of the very prestigious 2025 Tuzo ya Fedha ya A' Design Award in Usanifu wa Samani za Jikoni, Vifaa na Fittings Competition Category.
FedhaSamani za Jikoni· 2025
C3 Sterilization Sinki la Jikoni
by Nuomi
Client: Guangdong Nuomi Home Intelligent Technology Co.,Ltd
Tuzo ya Fedha ya A' Design Award Winner in Samani za Jikoni Category
- 46,412
- Verified Award Winner
- Verify Award Status for #172108
The Design
About C3 Sterilization Sinki la Jikoni
C3 Sterilization ni sinki la jikoni lenye huduma jumuishi ya utunzaji wa ubao wa kukatia. Sehemu maalum iliyojengwa ndani hutumia mwanga wa urujuanimno na mzunguko wa hewa moto ili kuua vijidudu na kukausha ubao wa kukatia ndani ya dakika 15. Mchakato wa utunzaji huanza kiotomatiki ubao wa kukatia unapowekwa ndani, na ukanda wa taa wa kihisi huonyesha hali ya utendaji kazi. Kuta za ndani zina mpako wa nano usiopenyeza maji kwa ajili ya kustahimili mikwaruzo na kujisafisha zenyewe, na bomba la kutoa maji lina tabaka la ioni za fedha zinazozuia bakteria. Muundo wa uhifadhi wa wima wenye kishikizo cha visu cha sumaku huokoa nafasi katika majikoni madogo.
The Recognition
About the Tuzo ya Fedha ya A' Design Award
C3 Sterilization Sinki la Jikoni ni mshindi wa Tuzo ya Fedha ya A' Design Award, utambuzi wenye heshima kubwa ya ajabu unaotolewa kwa miundo ya hali ya juu kabisa, ya kupendeza na ya kuvutia. Washindi wa Fedha ni kazi zinazong'aa mno na bunifu kupita kiasi zinazoonyesha utaalamu bora, kipaji na busara ya wabunifu wao. C3 Sterilization Sinki la Jikoni inatarajiwa kuwa kazi nzuri ya kuigwa ambayo ni ya kitaalamu kwa kiasi kikubwa na yenye ubunifu wa kina. Muundo huu ulioshinda Tuzo ya Fedha ya A' Design Award ni uvumbuzi unaojulikana sana na kupendwa, unaonufaisha na kupanua mipaka ya sanaa, sayansi, usanifu na teknolojia. C3 Sterilization Sinki la Jikoni ni kazi inayotamaniwa mno inayochochea hamu, huleta hisia chanya na huzua mshangao na mastaajabu.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The C3 sterilization sink, centering around the concept of an integrated healthy kitchen, innovatively incorporates cutting board care features, with the whole care process completed in 15 minutes. UV radiation and hot air circulation for cutting board sterilization, coupled with an integrated compartment and an innovative nano hydrophobic coating, enable the product to address single functionality of traditional sinks, bacterial growth of cutting boards, and poor space utilization of kitchens.
- Dimensions & Packaging
- 780*482*220mm
- Tags
- integrated healthy kitchen, sink with cutting board care features, cleaning, drying and sterilization, integrated compartment, auto start or stop, storage, safety, hygiene
- Production Technology
- The inner walls of the sink and the compartment are made of a GB 4806.9 material, and employ a nano hydrophobic coating with a contact angle of 110 degrees, achieving scratch resistant and self cleaning properties. The drainage pipe coated with an antibacterial silver ion layer kills 99.9 percent of bacteria. The fully sealed circuit system boasts an IPX7 waterproof rating, complemented by a UV lamp monitor that automatically alerts users after 6,000 hours of use, ensuring safety and durability.
- Design Challenge
- The challenge was how to satisfy the demand of users for a hygienic, efficient kitchen. To address that, the C3 sterilization sink is equipped with dual sterilization units, including UV radiation and hot air circulation, allowing for efficient sterilization with low energy consumption. An integrated compartment supports cutting board care and knife storage to effectively simplify operation for users. The application of a multimodal sensor enables precise recognition for auto start or stop.
- Research
- In the post pandemic era, consumers pay more attention to kitchen health, and increasing small sized residences stimulate the demand for space integration. However, traditional independent sinks and sterilizers fail to meet the requirements of modern kitchens in efficiency, health, and tidiness. The C3 sterilization sink actively responds to upgraded health awareness and more compact living spaces in modern society through technological integration and spatial optimization.
- Inspiration
- It was found that the bacteria levels of cutting boards in 70% of households exceed safe limits. This sink integrates medical grade sterilization technology and a miniaturized drying unit. Moreover, it draws on vertical storage design from Japanese kitchens to optimize spatial utilization, while also supporting auto start or stop and incorporating a magnetic knife rack. This product enables professional sterilization in home settings, creating a healthy, efficient, and tidy kitchen ecosystem.
- Project Duration
- The project started in Guangdong in April, 2023 and finished in August, 2024. The product was launched in China in September, 2024.
- Operation Flow
- UV radiation and hot air circulation automatically start once the cutting board is placed into the compartment, with the whole care process completed in 15 minutes without any manual operation.
A smart sensor light strip indicates the working status, and the UV unit is linked with the door switch to ensure safety during sterilization.
A vertical storage design, paired with a magnetic knife rack, allows users to smoothly access and store knives, significantly enhancing efficiency.
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
