Muundo Dond Meza Ya Chini na Jinyang Koo ni mshindi mashuhuri wa tuzo ya kifahari ya 2020 Tuzo ya Shaba ya A' Design Award katika Kategoria ya Mashindano ya Usanifu wa Samani.
ShabaSamani· 2020
Dond Meza Ya Chini
na Jinyang Koo
Mteja: Wuui
Mshindi wa Tuzo ya Shaba ya A' Design Award katika Kategoria ya Samani
Mshindi wa Tuzo Aliyethibitishwa
Thibitisha Hali ya Tuzo kwa #88288Muundo
Kuhusu Dond Meza Ya Chini
Simulizi la muundo wa Dond ni unyenyekevu lakini unaobadilika. Sehemu rahisi za kuunganisha huunda kutumia printa ya 3D, na sehemu ndogo za muundo ili matumizi ya kukusanyika kwa urahisi meza au iliyounganishwa kuendelea wakati wa usafirishaji. Kusudi la mbuni lilikuwa kwa Dond kuhusika katika matumizi ya kila siku inahitaji kufurahi maisha rahisi kwa hafla yoyote ya ndani au nje. Dond hutumia muundo ulio sawa wa kutengeneza kama vile uso wa juu haujaunganishwa kwa miguu na huondolewa kwa urahisi kutumia kama tray.
Utambuzi
Kuhusu Tuzo ya Shaba ya A' Design Award
Dond Meza Ya Chini ni mshindi wa Tuzo ya Shaba ya A' Design Award, utambuzi wenye heshima kubwa unaotolewa kwa miundo bora inayotofautishwa kwa ubunifu, ustadi na busara. Washindi wa Shaba ni kazi za ufundi mwingi na bunifu ya kushangaza zinazothibitisha uzoefu mpana, mawazo na ustadi wa wabunifu wao. Dond Meza Ya Chini inatarajiwa kuwa kitu kinachothaminiwa sana, kupendwa na kuenziwa, ambacho ni cha kitaalamu na bunifu kwa kiasi kikubwa. Muundo huu ulioshinda Tuzo ya Shaba ya A' Design Award unajumuisha mbinu bora katika sanaa, sayansi, usanifu na teknolojia, na ni bora kwa umakini wake kwa undani. Dond Meza Ya Chini hutosheleza mahitaji kwa uzuri, hugusa hamu, huvutia hisia na kuvutia udadisi.
Nyuma ya Muundo
Vifaa vya Habari
Mikopo, wanachama wa timu na maelezo ya kiufundi yaliyotolewa na mbuni.
- Sifa za Kipekee
- Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
- Vipimo na Ufungashaji
- Top: 330mmx330mmx15mm
Overall Height: 415mm - Lebo
- Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
- Teknolojia ya Uzalishaji
- The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
- Changamoto ya Ubunifu
- Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
- Utafiti
- During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
- Msukumo
- The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
- Muda wa Mradi
- The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
- Mtiririko wa Uendeshaji
- Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.
Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location. - Wanatimu
- JINYANG KOO
Imedhaminiwa
Gundua Zaidi ya Designers.org
Gundua bidhaa, huduma na fursa kutoka kwa washirika wetu wa matangazo.
Zaidi ya Kuchunguza
Miundo Inayohusiana
Chunguza miundo zaidi iliyoshinda tuzo kutoka kategoria hiyo hiyo, iliyochaguliwa kwa ubora.
