Enduro2 Мотоцикли Электрикӣ by Andrea Agazzini

Платина Нақлиёт · 2022

Enduro2 Мотоцикли Электрикӣ

by Andrea Agazzini

Ҷоизаи платинагии A' Design Award 2022 in Нақлиёт
CLIENT: Agazzini Bikes
Estimated Number of Design Views: 2,913,469
Verification code 36AA596197 · Verify this award

Visit Site View at A' Design Award Press Release

Colors

About Enduro2 Мотоцикли Электрикӣ

Enduro 2 аз идеяи якҷоя кардани мотосикли MTB ва Enduro дар як маҳсулот ба вуҷуд омадааст. Тарҳрезии он аз маҷмӯи шаклҳо иборат аст, ки решаҳои онро таҷассум мекунанд: чаҳорчӯбаи тез ва сабук дар нахи карбон ба муҳаррики муҳандисии CNC Ergal ворид карда мешавад, ки аз мотосикл ба даст омадааст. Муттаҳидшавии ин ду мавод ба таври синергетикӣ ба шакли нави инноватсионӣ муттаҳид шудааст. Дар пеши дучарха як хати мулоим ва нармро меҷӯяд, ки ҷузъҳои электрикиро дар дохили он муттаҳид мекунад, дар ҳоле ки қафо техникӣ ва қувватро ба ёд меорад.

About the Ҷоизаи платинагии A' Design Award

Enduro2 Мотоцикли Электрикӣ ғолиби Ҷоизаи платинагии A' Design Award аст, ки эътирофи басо обрӯманд буда, ба тарҳҳои ҳақиқатан истисноӣ, зебо ва боҳашамат дода мешавад. Ғолибони платина мӯъҷизаҳои офариниш, гувоҳи ҳудуди эҷодкории зеҳнӣ мебошанд ва касбият ва нубуғи беназири тарроҳони худро нишон медиҳанд. Интизор меравад, ки ин тарҳҳо машҳуртарин асарҳо бошанд, ки зебоипарастии як давраро муайян мекунанд, ба некӯаҳволии ҷомеа мусоидат менамоянд ва ҳудуди санъат, илм, тарроҳӣ ва технологияро пеш мебаранд. Enduro2 Мотоцикли Электрикӣ сатҳи фавқулодаи баландмартабагиро нишон медиҳад ва бешубҳа бо хусусиятҳои судманд ва арзишманди худ ҷаҳонро ба ҷои беҳтар табдил медиҳад. Enduro2 Мотоцикли Электрикӣ асари ғолиби Ҷоизаи платинагии A' Design Award аст, ки хостаҳоро бедор мекунад, илҳом мебахшад, ба ваҷд меорад, хушнуд мекунад ва шодии бузургро ба вуҷуд меорад.

Press Kit

Unique Properties: The first electric MotoBike designed to be the real link between Offroad Motorcycle and Bicycle: 4000W of power enclosed in a frame of only 27.5 kg coupled to coupling, 100% made in Italy in carbon fiber and CNC machined Ergal . The double transmission allows quick and precise gear changes at all times, even under stress. A vehicle designed for heavy and sporty use of the Enduro, but also for a relaxing walk in the woods.
Dimensions & Packaging: Electric MotoBike with independent pedaling and accelerator control with 4000W motor and 120 Nm of maximum torque. Weight 27.5 kg,
27.5" rear and 29" front wheels.
Tags: Mountain bike, Enduro, Off-Road, MTB, Cross Bike, Adventure
Production Technology: The frame of this MotoBike is made of carbon fiber in the front part from an autoclave mold, in the engine and in the rear part a plug-in technology without welded parts has been chosen, made of Ergal 7075 machined by CNC machines.
Design Challenge: The biggest problem was to create a product that was perfect to the tenth of a millimeter, favoring assembly and maintenance operations. This was possible by overturning the classic concept of the welded tubular frame and welcoming new technologies such as carbon fiber molds and CNC machined aluminum.
Research: The project started from a blank sheet, with the aim of creating an off-road vehicle between bikes and motorcycles that uses the largest number of components derived from the standard MTB market, in order to obtain a product that can be adjusted by anyone from anywhere. The idea is to amaze by creating a new segment on two wheels, thanks to the refinement that simultaneously delivers the electric motor, via the accelerator pedal, and the additional independent pedaling. After several researches related to the electrical components, I decided to create a system that integrated both the motor and the battery inside. The integrated motor removes the problems of overheating when climbing, typical of other motorcycles with an engine in the rear wheel, while the battery and the integrated control unit improve resistance to water and dirt. After almost two years of work, design, management tests and first sales, I can be very satisfied with the work done and with the companies that have helped me to produce this object.
Inspiration: The desire to experience the off-road vehicle halfway between motorcycles and bicycles, without sacrificing the power of the motorcycle and the agility and physical effort of the bicycle. It comes from my architectural experience and from the desire to create the first real MotoBike for technical use.
Project Duration: The project started in October 2019 and ended in the latter form in February 2021. The development was followed completely by myself and the realization took place through production companies at a maximum of 80 km from our headquarters in Grignasco ( Novara)