OmniFiber Матои худидроккунандаи морфинг аз Ozgun Kilic Afsar

Тарҳи OmniFiber Матои худидроккунандаи морфинг аз Ozgun Kilic Afsar ғолиби шоистаи ҷоизаи бонуфузи 2022 Ҷоизаи биринҷии A' Design Award дар категорияи мусобиқавии Дизайни матоъ, бофта, нақш ва порча мебошад.

БиринҷМатоъ· 2022

OmniFiber Матои худидроккунандаи морфинг

аз ҷониби Ozgun Kilic Afsar

Муштарӣ: Ozgun Kilic Afsar

Ғолиби Ҷоизаи биринҷии A' Design Award дар категорияи Матоъ

42,390

Ғолиби тасдиқшудаи ҷоиза

Тасдиқи вазъи ҷоиза барои #131625

Ба сайт гузаред Дар A' Design Award дидан Релизи матбуотӣ Нишони ҷоиза

Рангҳо

Тарҳ

Дар бораи OmniFiber Матои худидроккунандаи морфинг

OmniFiber технологияи нахи микросиалиест барои матоъҳо ва либосҳои роботикӣ. Ин нах деформатсияи худро ҳис карда, ба он ба таври механикӣ вокуниш нишон медиҳад. OmniFiber бо вокунуши фаврӣ, нисбати фишурдашавии баланд ва қувваи хурӯҷии зиёд қисқар мешавад, дароз мешавад, хам мешавад ва печ мехӯрад. Як нахи ягона метавонад аз 500 микрон то 2 миллиметр диаметр дошта бошад ва онро метавон бофт ё торуна карда, ба матоъ табдил дод. Модули идоракунии либоспӯш фишор ва суръати ҷараёни ҳаворо тағйир дода, ҳаракатро барномарезӣ мекунад. Соҳаҳои истифодаи он либосҳои кинестетикӣ, либосҳои мутобиқшавандаи динамикӣ ва дастгоҳҳои ҳаптикии дар асоси матоъ сохташударо дар бар мегиранд.

Эътироф

Дар бораи Ҷоизаи биринҷии A' Design Award

OmniFiber Матои худидроккунандаи морфинг ғолиби Ҷоизаи биринҷии A' Design Award аст, ки эътирофи басо обрӯманд буда, ба тарҳҳои барҷаста дода мешавад, ки бо эҷодкорӣ, зеҳни тез ва зиракӣ фарқ мекунанд. Ғолибони биринҷ артефактҳои хеле моҳир ва ба таври ҷолиб эҷодкоронаанд, ки таҷрибаи васеъ, тасаввурот ва зеҳни тарроҳони худро тасдиқ мекунанд. Интизор меравад, ки OmniFiber Матои худидроккунандаи морфинг ашёи хеле қадршуда, мавриди таҳсин ва маҳбуб бошад, ки ба таври назаррас касбӣ ва навоварона аст. Ин тарҳи ғолиби Ҷоизаи биринҷии A' Design Award беҳтарин амалияро дар санъат, илм, тарроҳӣ ва технология дар бар мегирад ва бо диққати худ ба тафсилот аъло аст. OmniFiber Матои худидроккунандаи морфинг эҳтиёҷотро бо зебоӣ қонеъ мекунад, ба хостаҳо даст мерасонад, эҳсосотро мафтун месозад ва кунҷковиро ҷалб мекунад.

Дар паси тарҳ

Маҷмӯаи матбуотӣ

Кредитҳо, аъзои гурӯҳ ва тафсилоти техникие, ки тарроҳ пешниҳод кардааст.

Хусусиятҳои беназир: OmniFiber is a high-pressure microfluidic fiber technology for robotic textiles and garments. The fiber is engineered to sense its own physical deformation and mechanically respond to it. OmniFiber has versatile morphing behavior such as contracting, extending, bending and coiling with immediate response, high contraction ratio and high force output. This allows a myriad of applications including kinesthetic wearables for skill learning and transfer, dynamic fitting garments, and textile-based haptic devices for telepresence applications.
Андоза ва бастабандӣ: A single OmniFiber device can be as thin as 500 microns and as large as 2 millimeters in diameter. They can be fabricated theoretically at infinite lengths, although we have so far achieved a continuous fabrication of a 60 meters-long fiber spool.
A single contractible fiber of 1.8 mm diameter exhibits forces up to 19 Newtons, demonstrating high speeds of linear actuation with as little as 5 milliseconds response time for full-state morphing.
Тегҳо: Interaction Design, Materials Research, Human-Textile Interaction, Morphing User Interfaces, Haptic Devices, Soft Sensors and Actuators, Microfluidics, Intelligent Textiles, Fibers
Технологияи истеҳсол: This work demonstrates that microfluidic actuation with reinforced tubular elastomers can be leveraged for fluidic morphing matter that acts as a fiber in a fabric assembly. The technology is designed for closed loop Human Textile Interaction by applying localized sensor nodes on the fiber body. A mechanical programming pipeline is developed for versatile morphing states by adding on-demand mechanical constraints. With various assemblies made of OmniFibers, in-fabric haptic feedback is achieved including high frequency oscillations, lateral skin stretch, and compression.
Мушкилоти дизайн: Recently, there have been remarkable advancements that yield a myriad of engineered fibers, however prior work has often focused on achieving either sensing or actuation, but seldom both. Readily employed fibers such as shape memory alloys have limitations that hinder their integration to everyday interactions. These are high cost, slow response, small forces, arduous training, and risk of burning the skin. To overcome these challenges, we established a fiber technology that uses off-the-shelf materials, is scalable, machine-knittable, safe to wear, and has immediate response.
Таҳқиқот: Advances in materials science invite visions of a world where people interact with machines through garments. OmniFiber presents a novel textile technology where actuated fibers are used to make self-sensing robotic fabrics. The fabrication and comprehensive system design provide designers with an accessible way to knit and weave fluidic morphing swatches. OmniFiber operates with low power, high bandwidth and is strong enough to lift kilograms of weight, making it an ideal technology for kinesthetic wearables such as respiratory regulation-wear, soft exoskeletons for dance pedagogy, and peristaltic compression garments.
Илҳом: Textiles are vital to our survival across scales, from medical textiles that repair our organs to blankets that provide warmth and protection. Although the development of textiles is intertwined with that of human progress, they are still valued as static and disposable goods. Advanced fibers have the potential to create a whole new industry where textiles can sense surroundings; store energy; and communicate in a single package. This will increase the value of textiles to society, transforming them from something we buy, use and throw away, to a platform for experiences and services.
Давомнокии лоиҳа: Started in April 2020 at MIT Media Lab, Cambridge, Massachusetts and ended in November 2021. The work has been presented and demonstrated at the ACM User Interface Software and Technology Symposium in October 2021.
Ҷараёни кор: The system design consists of a fiber based interface and a wearable pneumatic control module that together convert energy from a compressed fluid medium to mechanical motion. The fiber behavior is programmed by miniaturized valves in the control module that vary air pressure and flow rate, operated through a graphical interface. The users can interact with OmniFiber based devices leveraging the closed loop strain control functionality for real time, and record-playback interactions, or alternatively design morphing behavior using the event scheduler on the graphical interface.
Патентҳо: Provisional Patent. Patent No. 63/276895. Joint, Media Laboratory. 2021.

https://patents.media.mit.edu/23866TJ
Аъзои гурӯҳ: Ozgun Kilic Afsar
Ali Shtarbanov
Hiroshi Ishii
Ҳуқуқи тасвирҳо: All Photo credits to Ozgun Kilic Afsar, 2021.
All Video credits to MIT, 2021.