C3 Sterilization Дастшӯяки ошхона by Nuomi is a highly esteemed winner of the very prestigious 2025 Ҷоизаи нуқрагии A' Design Award in Дизайни мебели ошхона, таҷҳизот ва мутаффиқаҳо Competition Category.
НуқраМебели ошхона· 2025
C3 Sterilization Дастшӯяки ошхона
by Nuomi
Client: Guangdong Nuomi Home Intelligent Technology Co.,Ltd
Ҷоизаи нуқрагии A' Design Award Winner in Мебели ошхона Category
- 46,412
- Verified Award Winner
- Verify Award Status for #172108
The Design
About C3 Sterilization Дастшӯяки ошхона
C3 Sterilization дастшӯяки ошхонаест, ки бо системаи нигоҳубини тахтаи буриш муҷаҳҳаз аст. Қисмати дарунсохти он бо истифодаи нури ултрабунафш ва гардиши ҳавои гарм тахтаи буришро дар давоми 15 дақиқа безарар (стерилизатсия) ва хушк мекунад. Раванди нигоҳубин ҳангоми ҷойгир кардани тахтаи буриш ба дарун ба таври худкор оғоз мешавад ва навори чароғаки сенсорӣ ҳолати корро нишон медиҳад. Деворҳои дарунӣ бо қабати нано-гидрофобӣ пӯшонида шудаанд, ки ба харошидан тобовар буда, худтозакунӣ мекунанд, ва қубури обпарто дорои қабати зиддибактериявии ионҳои нуқра мебошад. Тарҳи нигоҳдории амудӣ бо дорандаи магнитии корд дар ошхонаҳои хурд ҷойро сарфа мекунад.
The Recognition
About the Ҷоизаи нуқрагии A' Design Award
C3 Sterilization Дастшӯяки ошхона ғолиби Ҷоизаи нуқрагии A' Design Award аст, ки эътирофи фавқулодда обрӯманд буда, ба тарҳҳои сатҳи олӣ, зебо ва таъсирбахш дода мешавад. Ғолибони нуқра асарҳои бағоят дурахшон ва бениҳоят эҷодкоронаанд, ки таҷрибаи барҷаста, истеъдод ва зиракии тарроҳони худро нишон медиҳанд. Интизор меравад, ки C3 Sterilization Дастшӯяки ошхона асари аҷоиб ва намунавӣ бошад, ки ба таври назаррас касбӣ ва амиқан навоваронаанд. Ин тарҳи ғолиби Ҷоизаи нуқрагии A' Design Award ихтирои хеле назаррас ва мавриди таҳсин аст, ки судманд аст ва ҳудуди санъат, илм, тарроҳӣ ва технологияро пеш мебарад. C3 Sterilization Дастшӯяки ошхона офаридаест, ки бисёриҳо ба он ҳасад мебаранд ва хостаҳоро бедор мекунад, эҳсосоти мусбат меорад ва ҳайрат ва тааҷҷуб ба вуҷуд меорад.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The C3 sterilization sink, centering around the concept of an integrated healthy kitchen, innovatively incorporates cutting board care features, with the whole care process completed in 15 minutes. UV radiation and hot air circulation for cutting board sterilization, coupled with an integrated compartment and an innovative nano hydrophobic coating, enable the product to address single functionality of traditional sinks, bacterial growth of cutting boards, and poor space utilization of kitchens.
- Dimensions & Packaging
- 780*482*220mm
- Tags
- integrated healthy kitchen, sink with cutting board care features, cleaning, drying and sterilization, integrated compartment, auto start or stop, storage, safety, hygiene
- Production Technology
- The inner walls of the sink and the compartment are made of a GB 4806.9 material, and employ a nano hydrophobic coating with a contact angle of 110 degrees, achieving scratch resistant and self cleaning properties. The drainage pipe coated with an antibacterial silver ion layer kills 99.9 percent of bacteria. The fully sealed circuit system boasts an IPX7 waterproof rating, complemented by a UV lamp monitor that automatically alerts users after 6,000 hours of use, ensuring safety and durability.
- Design Challenge
- The challenge was how to satisfy the demand of users for a hygienic, efficient kitchen. To address that, the C3 sterilization sink is equipped with dual sterilization units, including UV radiation and hot air circulation, allowing for efficient sterilization with low energy consumption. An integrated compartment supports cutting board care and knife storage to effectively simplify operation for users. The application of a multimodal sensor enables precise recognition for auto start or stop.
- Research
- In the post pandemic era, consumers pay more attention to kitchen health, and increasing small sized residences stimulate the demand for space integration. However, traditional independent sinks and sterilizers fail to meet the requirements of modern kitchens in efficiency, health, and tidiness. The C3 sterilization sink actively responds to upgraded health awareness and more compact living spaces in modern society through technological integration and spatial optimization.
- Inspiration
- It was found that the bacteria levels of cutting boards in 70% of households exceed safe limits. This sink integrates medical grade sterilization technology and a miniaturized drying unit. Moreover, it draws on vertical storage design from Japanese kitchens to optimize spatial utilization, while also supporting auto start or stop and incorporating a magnetic knife rack. This product enables professional sterilization in home settings, creating a healthy, efficient, and tidy kitchen ecosystem.
- Project Duration
- The project started in Guangdong in April, 2023 and finished in August, 2024. The product was launched in China in September, 2024.
- Operation Flow
- UV radiation and hot air circulation automatically start once the cutting board is placed into the compartment, with the whole care process completed in 15 minutes without any manual operation.
A smart sensor light strip indicates the working status, and the UV unit is linked with the door switch to ensure safety during sterilization.
A vertical storage design, paired with a magnetic knife rack, allows users to smoothly access and store knives, significantly enhancing efficiency.
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
