ዲዛይን Arch ወንበር፡ ደገፍ ዘይብሉ ወንበር ብ Edvard Glazebrook ኣብ ናይ ውድድር ምድብ ንድፊ ኣቕሑ ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2021 ናይ ነሓስ ሽልማት A' Design Award እዩ።
ነሓስኣቕሑ· 2021
Arch ወንበር፡ ደገፍ ዘይብሉ ወንበር
ኣብ ምድብ ኣቕሑ ተሸላማይ ናይ ነሓስ ሽልማት A' Design Award
ዝተረጋገጸ ተሸላማይ
ንቁጽሪ #106853 ሽልማት ኣረጋግጽእቲ ዲዛይን
ብዛዕባ Arch ወንበር፡ ደገፍ ዘይብሉ ወንበር
ኣርች ካብ ዝተጠረበን ብጸሊም ዝተነጸገን ላሚነትድ ጽንዑር ዕንጨይቲ (ፓይን) ዝተሰርሐ ወንበርን ደገፍ ዘይብሉ መቀመጢን እዩ። እዚ ንድፍ ኣብ ቀሊላትን ዝድገማን ቅርጽታትን ቅዲታትን ዝተመስረተ ኮይኑ፡ ንኣቕሓ ቤት ሓደ ዓይነትን ስነ-ሓሳባውን መልክዕ ይህቦ። ሓሙሽተ ማዕረ ኣርችታት ንኣእጋርን ንደጀፍ ኮፍ መበሊ ወንበርን ይፈጥሩ፡ ደገፍ ዘይብሉ መቀመጢ ግና ካብ ሰለስተ ፍርቂ ኣርችታት ኣብ ማእከል ዝራኸቡ ዝቖመ እዩ። ኩሎም ኣካላት ብ CNC ራውተር ካብ ላሚነትድ ናይ ዕንጨይቲ ሸፋን ዝተቖርጹ ኮይኖም፡ ብድሕሪኡ ብጽፍግን ብዕንጨይቲ ዶወላትን ተጣቢቖምን ተራኺቦምን። እቶም መንቀርቀርቲ ቅርጽታት ነቲ ኣቕሓ ኣብቶም ዝደኸሙ ክፍልታት የደልድልዎ።
እቲ ኣፍልጦ
ብዛዕባ ናይ ነሓስ ሽልማት A' Design Award
Arch ወንበር፡ ደገፍ ዘይብሉ ወንበር ናይ ነሓስ ሽልማት A' Design Award ዝዓወተ እዩ፣ ብፈጠራ፣ ርእሰ ሓይልን ስቕታን ዝፍለዩ ብልጫ ዘለዎም ዲዛይናት ዝወሃብ ኣዚዩ ክቡር ኣፍልጦ። ዘዓወቱ ነሓስ ሰፊሕ ተሞክሮ፣ ምሕሳብን ርእሰ ምምዕባልን ዲዛይነራቶም ዘረጋግጹ ኣዚዮም ክኢላታትን ብዘደንቕ መገዲ ፈጠራውያንን ኣርቴፋክትታት እዮም። Arch ወንበር፡ ደገፍ ዘይብሉ ወንበር ብዙሕ ዝተመነየ፣ ዝደነቐን ዝፈተዎን ብኣገዳሲ መገዲ ሞያውን ሓድሽን ኣቕሓ ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ነሓስ ሽልማት A' Design Award ኣብ ጥበብ፣ ሳይንስ፣ ዲዛይንን ቴክኖሎጂን ዝበለጹ ልምድታት ዘጣምር፣ ንዝርዝር ብዝህቦ ኣቓልቦ ድማ ዝበለጸ እዩ። Arch ወንበር፡ ደገፍ ዘይብሉ ወንበር ድልየታት ብጽባቐ የማልእ፣ ንድሌታት ይትንክፍ፣ ንስምዒታት የማርኽን ሕቶ ድማ የሰሕብን።
ድሕሪ እቲ ዲዛይን
ናይ ፕረስ ኪት
ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።
- ፍሉያት ባህርያት
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- ዓቐንን ማዕሸግን
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - መለለዪታት
- Wood, Chair, Stool, Pine wood, Arches, Curve
- ናይ ምፍራይ ቴክኖሎጂ
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- ናይ ዲዛይን ብድሆ
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- ምርምር
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- ምንጪ ሓሳብ
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- ናይ ፕሮጀክት ግዜ
- The project started in march 2020 - and finished in late May 2020.
- ናይ ስርሒት ፍሰት
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- ፓተንታት
- Copyrights belong to Edvard Glazebrook, 2020
- ኣባላት ጋንታ
- Edvard Glazebrook
ስፖንሰር ዝተገብረ
ልዕሊ Designers.org ዳህሰስ
ካብ ናይ ማስታወቂያ መሻርኽትና ፍርያት፣ ኣገልግሎታትን ዕድላትን ፍለጥ።
ተወሳኺ ንምርካብ
ተዛመድቲ ዲዛይናት
ካብ ተመሳሳሊ ምድብ ብብቕዓት ዝተመረጹ ተወሳኺ ሽልማት ዝተዓወቱ ዲዛይናት ድለዩ።
