ዲዛይን JAM Vision Track3 ናይ መነጽር ፍሬም ብ Sebastien Brusset ኣብ ናይ ውድድር ምድብ ንድፊ ጌጣጌጥ ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2021 ናይ ነሓስ ሽልማት A' Design Award እዩ።
ነሓስጌጣጌጥ· 2021
JAM Vision Track3 ናይ መነጽር ፍሬም
ዓሚል: JAM-Vision
ኣብ ምድብ ጌጣጌጥ ተሸላማይ ናይ ነሓስ ሽልማት A' Design Award
ዝተረጋገጸ ተሸላማይ
ንቁጽሪ #115959 ሽልማት ኣረጋግጽእቲ ዲዛይን
ብዛዕባ JAM Vision Track3 ናይ መነጽር ፍሬም
ጃኤም ቪዥን ትራክ3 ንትሑት ናይ ኣከባቢ ጽልዋ ዝተሓሰበ ናይ መነጽር ፍሬም እዩ። ቅድመኡን ጫፋትን ብተወሳኺ ኣቀማምጣ (additive manufacturing) ካብ PA11 ዝተሰርሑ ኮይኖም፣ እዚ ኸኣ ብልሽት ንዋት ይድርት። ናይ ግንባርን ድልድልን ክፋላት ካብ ምሉእ ብምሉእ እንደገና ዝተጠቐመ ስቴንለስ ስቲል ብሌዘር ዝተቐርጹ እዮም። ነፍሲ ወከፍ ፍሬም ብመሰረት ጠለብ ስለ ዝስራሕ፣ ዕቃን ትርፍን ይእገድ። ኩሎም ክፋላት ብመካኒካዊ መገዲ ተጠሓሒዞም ኣለዉ፣ ብዘይ መልጎምን ላግጽን፣ በዚ ኸኣ ሓደ ክፋል ምስ ተበላሸወ ጥራይ ክትካእ ይክእል። ፓተንት ዘለዎ ማግኔታዊ መጠዋውይ ናይ ስክሩ ኣድላይነት ኣወግዱ፣ ብ100,000 ግዜ ናይ ምዕጻፍ ሙከራ ከኣ ብዘይ ምንኪ ብቕዓት ተፈሽኑ። ምሉእ ፍሬም ካብ 20 ግራም ንታሕቲ ክብደት ኣለዎ።
እቲ ኣፍልጦ
ብዛዕባ ናይ ነሓስ ሽልማት A' Design Award
JAM Vision Track3 ናይ መነጽር ፍሬም ናይ ነሓስ ሽልማት A' Design Award ዝዓወተ እዩ፣ ብፈጠራ፣ ርእሰ ሓይልን ስቕታን ዝፍለዩ ብልጫ ዘለዎም ዲዛይናት ዝወሃብ ኣዚዩ ክቡር ኣፍልጦ። ዘዓወቱ ነሓስ ሰፊሕ ተሞክሮ፣ ምሕሳብን ርእሰ ምምዕባልን ዲዛይነራቶም ዘረጋግጹ ኣዚዮም ክኢላታትን ብዘደንቕ መገዲ ፈጠራውያንን ኣርቴፋክትታት እዮም። JAM Vision Track3 ናይ መነጽር ፍሬም ብዙሕ ዝተመነየ፣ ዝደነቐን ዝፈተዎን ብኣገዳሲ መገዲ ሞያውን ሓድሽን ኣቕሓ ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ነሓስ ሽልማት A' Design Award ኣብ ጥበብ፣ ሳይንስ፣ ዲዛይንን ቴክኖሎጂን ዝበለጹ ልምድታት ዘጣምር፣ ንዝርዝር ብዝህቦ ኣቓልቦ ድማ ዝበለጸ እዩ። JAM Vision Track3 ናይ መነጽር ፍሬም ድልየታት ብጽባቐ የማልእ፣ ንድሌታት ይትንክፍ፣ ንስምዒታት የማርኽን ሕቶ ድማ የሰሕብን።
ድሕሪ እቲ ዲዛይን
ናይ ፕረስ ኪት
ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።
- ፍሉያት ባህርያት
- The Eyewear is fully sustainable, economical, made on demand, and innovative. Thanks to additive manufacturing and Laser cut stainless steel 100% recycled, made on demand, the project is eco-responsible without creating wasted product. Thanks to the patented simple hinges and the clipping system, it could be assembled even by the end user ! Also, as the patented hinge is based on magnetic elements, the hinge is life lasting (100.000 folding test has been made, without any loss performance !)
- ዓቐንን ማዕሸግን
- 145x155x45mm / Less than 20g
- መለለዪታት
- Sustainable, innovative, magnetic hinges, 3Dprinted, mechanical assembly, Made on demand
- ናይ ምፍራይ ቴክኖሎጂ
- PA11 additive manufactured, 100% recycled stainless steel, and our know-how in terms of 3D printing constraint and possibilities. Patented hinge obtained by magnets assembly to create friction and axis
- ናይ ዲዛይን ብድሆ
- When we decided to launch a brand, we decided that the footprint of this line needs to be as minimum as possible. The eyewear industry use to work with classical soustractive solution (80% of the raw material is trashed), and fixed assembly solution (riveted, soldered, shouted). We decided to start with a brand new method, work in additive, source only eco responsible material, and mechanical easy assembly, to eventually leave the customer to do it by himself.
- ምንጪ ሓሳብ
- We were inspired by Ikea, for the easy assembly, and also by the old metal toys to be bend and assembly. Then, lines are inspired by minimalism Japanese spirit, and engineering achievement that we learnt working with some high-end customer (like McLaren). Hinges came thanks to my passion for magnets
- ናይ ፕሮጀክት ግዜ
- 8 months of creation and pre-production, designed in Lyon, France
- ናይ ስርሒት ፍሰት
- This frame is obtained by easy assembly between parts after high personalization of each parts, made on demand, without high stock. All the elements are easy to remove in order to replace just one part in case of breakage. The hinge itself has been tested with 100.000 folding, without any reduction of performance, which push the boundaries of every other ones resistance.
- ፓተንታት
- Patent pending 2020, France
- ኣባላት ጋንታ
- Sébastien Brusset (product designer and brand)
Jean-Luc James (graphisme and brand)
ስፖንሰር ዝተገብረ
ልዕሊ Designers.org ዳህሰስ
ካብ ናይ ማስታወቂያ መሻርኽትና ፍርያት፣ ኣገልግሎታትን ዕድላትን ፍለጥ።
ተወሳኺ ንምርካብ
ተዛመድቲ ዲዛይናት
ካብ ተመሳሳሊ ምድብ ብብቕዓት ዝተመረጹ ተወሳኺ ሽልማት ዝተዓወቱ ዲዛይናት ድለዩ።
