Horizontal Long Mesh መደገፊ ዓባይ እሳት ብ Shigeru Yamada

ዲዛይን Horizontal Long Mesh መደገፊ ዓባይ እሳት ብ Shigeru Yamada ኣብ ናይ ውድድር ምድብ ንድፊ ኣቕሑ ካምፒንግን ናይ ደገ መሳርሒታትን ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2024 ናይ ብሩር ሽልማት A' Design Award እዩ።

ብሩርኣቕሑ ካምፒንግ· 2024

Horizontal Long Mesh መደገፊ ዓባይ እሳት

ብ Shigeru Yamada

ዓሚል: Norinori Life

ኣብ ምድብ ኣቕሑ ካምፒንግ ተሸላማይ ናይ ብሩር ሽልማት A' Design Award

163,853

ዝተረጋገጸ ተሸላማይ

ንቁጽሪ #153103 ሽልማት ኣረጋግጽ

ሳይት ብጻሕ ኣብ A' Design Award ርአዮ ጋዜጣዊ መግለጺ ባጅ ሽልማት

ሕብርታት

እቲ ዲዛይን

ብዛዕባ Horizontal Long Mesh መደገፊ ዓባይ እሳት

ክፉት እሳት ንሳዕርን ሓመድን ከጐድእ ዝኽእል እኳ እንተኾነ፡ እዚ ቀሊል ክብደትን ጽፉፍን ዝኾነ፡ ብዘይትስእን ሓጺን ቅርጺን ንውሽጢ ዝዓረገ መርበብ ቅርጺን ዝተሰርሐ ፍርያት፡ ንኣመድን ጭልፋታት እሳትን ናብ ከባቢ ከይዝርግሑ ኣብ ዝተፈላለየ ቦታታት ዓባይ እሳት ክትሰማማዕ የኽእለካ። ኣብ ጃፓን ፓተንት ዝሓዘ እዚ ቅርጺ፡ ብለይቲ ሰበራት እሳት ብመርበብ ክሐልፉ የኽእሎም፣ እዚ ድማ ኣእዋም ብህድእ ናብ ኣመድ ክቕየር ከተዓዘቦ የኽእለካ።

እቲ ኣፍልጦ

ብዛዕባ ናይ ብሩር ሽልማት A' Design Award

Horizontal Long Mesh መደገፊ ዓባይ እሳት ናይ ብሩር ሽልማት A' Design Award ዝዓወተ እዩ፣ ንጽቡቓት፣ ልዑላትን ዘስደምምን ላዕለዋይ ደረጃ ዘለዎም ዲዛይናት ዝወሃብ ብዘይተለምደ ኣዚዩ ክቡር ኣፍልጦ። ዘዓወቱ ብሩር ፍሉይ ክእለት፣ ተውህቦን ጥበብን ዲዛይነራቶም ዘርእዩ ኣዚዮም ዘብርሁን ብዙሕ ፈጠራውያንን ስራሕቲ እዮም። Horizontal Long Mesh መደገፊ ዓባይ እሳት ዝበለጸ፣ ምሳሌ ዝኾነ፣ ብኣገዳሲ መገዲ ሞያውን ብዕምቆት ሓድሽን ስራሕ ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ብሩር ሽልማት A' Design Award ብዙሕ ዝተራእየን ዝደነቐን ፈጠራ እዩ፣ ጥቕሚ ዘምጽእን ደረት ጥበብ፣ ሳይንስ፣ ዲዛይንን ቴክኖሎጂን ዘስፍሕን። Horizontal Long Mesh መደገፊ ዓባይ እሳት ብብዙሕ ዝቐንኣሉ ፍጥረት እዩ፣ ድሌታት ዘበራብር፣ ጽቡቕ ስምዒታት ዘምጽእን ሰንቢድን ምድናቕን ዘበራብርን።

ድሕሪ እቲ ዲዛይን

ናይ ፕረስ ኪት

ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።

ፍሉያት ባህርያት: Most ordinary mesh-type fire pits have the mesh supported from below, but this product has a concave mesh structure that hooks onto the side frames, a structure that did not exist before and for which a patent was obtained (patent 7249692). This unique structure eliminates the weak point of conventional mesh-type fire pits, which are vulnerable to wind and difficult to cook with, while at the same time realizing the unique value of the beautiful flames shining through the mesh.
ዓቐንን ማዕሸግን: Size:
W53cm×D18cm×H32cm(when assembled)
W50cm×D25cm×H5cm(when stored)
Material:
Main body, sidebars, legs: Stainless steel (SUS304)
Mesh sheet: Stainless steel (SUS304) ＊Dovetails are made of aluminum
Storage bag: cotton
Logo sticker: High-gloss paper (water-resistant)
Weight:1.8kg
መለለዪታት: Outdoor, Camping, Bonfire
ናይ ምፍራይ ቴክኖሎጂ: Conventional mesh-type fire pits were used with the mesh spread out, but while they were lightweight and compact, they were vulnerable to wind and unsuitable for cooking. The mesh is then hooked onto a frame made of stainless steel (which can be assembled and put away in less than 30 seconds), creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash. The ironworker, who is a camper himself, developed this product under the direction of an outside designer to achieve both functionality and aesthetics.
ናይ ዲዛይን ብድሆ: The main focus of this product was to hold the woven stainless steel mesh in a U-shape with a frame, but it was also a portable product, so it needed to be compact and lightweight. Therefore, it was necessary to consider a variety of structures that could be easily assembled with a minimum of parts.
ምርምር: With the outdoor boom that began in the late 2010s, camping for a small group of one or two people has become especially popular, and a variety of outdoor gears have been sold. Among them, fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with. The new design has a stainless steel frame (which can be assembled and put away in less than 30 seconds) and a structure that hooks onto the mesh, creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash.
ምንጪ ሓሳብ: Fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with.
ናይ ፕሮጀክት ግዜ: This product was launched in Japan on September 1, 2021
ናይ ስርሒት ፍሰት: This fire pit was created by an ironworker who is also a camper. The stainless-steel mesh with high combustion efficiency is shaped in a concave that is less susceptible to wind. By using a trivet, a heavy Dutch oven can also be used. It is designed to allow the flames to be seen for its beauty and ease of cooking over an open fire where you can always see the heat level. Tough, minimal, and logical structure with an exquisite finishing. It is true craftsmanship quality that you will appreciate every time you use it.
ፓተንታት: This product is patent pending (Patent Application 2023-011315, filed 1/27/2023) by Noridomi Ironworks Co.,LTD.
ኣባላት ጋንታ: Creator:Shigeru Yamada
Creative Derector:Takashi Sekimitsu
Assistant Director:Kenzo Noridomi
ናይ ስእሊ ክረዲት: Image #1: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #2: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #3: Director Kenzo Noridomi, Horizontal Long Mesh, 2023.
Image #4: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #5: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.