Masoud Akbarzadeh tarapyndan döredilen Saltatur Stol dizaýny Mebel Dizaýny Bäsleşik Kategoriýasynda 2020 A' Design Award Kümüş Baýragy baýragynyň abraýly ýeňijisidir.
KümüşMebel· 2020
Saltatur Stol
dizaýner: Masoud Akbarzadeh
Müşderi: Polyhedral Structure Laboratory
Mebel Kategoriýasynda A' Design Award Kümüş Baýragy Ýeňijisi
Tassyklanan Baýrak Ýeňijisi
#99680 üçin Baýrak Ýagdaýyny BarlaňDizaýn
Saltatur Stol hakynda
Saltatur — öňünden taýýarlanan kompozit gurluş hökmünde döredilen uzyn aralykly stol. Stol diňe gysyşa işleýän beton bedeni, dartgynlaýan polat çybyklary we örän inçe aýna üstüni birleşdirýär. Aýna üsti 3,75 metr aralygy tutýan funikulýar üç şarnirli arka görnüşinde şekillendirilendir. Gurluş görnüşi üçölçegli grafiki statika bilen işlenip taýýarlanyldy, şeýlelikde beton bedeni ýokarky we aşaky dartgynlaýjy baglaýjylar arkaly gysyşda saklanýar. Aýratyn giňişlik ulgamy betonyň göwrümini we uglerod yzyny azaldýar, şol bir wagtyň özünde gurluş öndürijiligi üçin gerekli massany saklaýar.
Ykrar etme
A' Design Award Kümüş Baýragy hakynda
Saltatur Stol A' Design Award Kümüş Baýragynyň ýeňijisidir; bu owadan, belent we täsirli ýokary derejeli dizaýnlara berilýän adatdan daşary abraýly ykrarnamadyr. Kümüş ýeňijileri dizaýnerleriniň ajaýyp bilimini, zehinini we ýiti aňyny görkezýän aşa ýalpyldawuk we örän döredijilikli eserlerdir. Saltatur Stol ajaýyp, nusgalyk, üns çekiji derejede hünärmenlikli we çuňňur täzelikçi eser bolmagy garaşylýar. A' Design Award Kümüş Baýragyny gazanan bu dizaýn sungatyň, ylmyň, dizaýnyň we tehnologiýanyň çäklerine peýda berýän we ony öňe sürýän örän üns çekiji, haýran galynýan oýlap tapyşdyr. Saltatur Stol köpüň gabanjyna sezewar bolýan, isleglerimizi oýarýan, oňyn duýgulary getirýän we haýranlyk we geň galmagy döredýän eserdir.
Dizaýnyň sahna arkasy
Metbugat toplumy
Dizaýner tarapyndan berlen kreditler, topar agzalary we tehniki maglumatlar.
- Üýtgeşik Aýratynlyklar
- The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
- Ölçegler we Gaplama
- 195 cm (W) x 308 cm (L) x 90 cm (H)
- Bellikler
- composite, ultra thin spatial concrete, design for reassembly, funicular structures
- Önümçilik Tehnologiýasy
- There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
- Dizaýn Kynçylygy
- Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
- Gözleg
- The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
- Ylham
- The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
- Taslama Dowamlylygy
- 2 years, Weitzman School of Design, University of Pennsylvania
- Iş Akymy
- The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
- Patentler
- N/A
- Topar Agzalary
- Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
- Surat Awtorlary
- Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory
Hemaýatçy
Designers.org-dan Daşary Öwreniň
Mahabat hyzmatdaşlarymyzdan önümleri, hyzmatlary we mümkinçilikleri tapyň.
Has köp öwreniň
Degişli dizaýnlar
Şol bir kategoriýadan mynasyplyk boýunça saýlanan beýleki baýrakly dizaýnlary öwreniň.
