Arch Silya, Silyang Walang Sandalan by Edvard Glazebrook

Arch Silya, Silyang Walang Sandalan by Edvard Glazebrook is a highly esteemed winner of the very prestigious 2021 A' Design Award na Bronse in Disenyo ng Muwebles Competition Category.

BronseMuwebles· 2021

Arch Silya, Silyang Walang Sandalan

by Edvard Glazebrook

A' Design Award na Bronse Winner in Muwebles Category

11,029

Verified Award Winner

Verify Award Status for #106853

View at A' Design Award Press Release Award Badge

Colors

The Design

About Arch Silya, Silyang Walang Sandalan

Ang Arch ay isang silya at isang upuang walang sandalan na gawa sa inukit at itim na binurnisan na laminadong kahoy na pino. Ang disenyo ay nakabatay sa simple at paulit-ulit na mga anyo at hugis, na nagbibigay sa muwebles ng homogenous at lohikal na ekspresyon. Limang magkakatulad na arko ang bumubuo sa mga binti at sandalan ng silya, samantalang ang upuang walang sandalan ay gawa sa tatlong kalahating arko na nagtatagpo sa gitna. Lahat ng bahagi ay hinugot mula sa laminadong tabla ng kahoy gamit ang CNC router, pagkatapos ay idinikit at pinagsama gamit ang mga kahoy na dowel. Pinatitibay ng mga kurba ang muwebles sa mga pinakamahihinang bahagi nito.

The Recognition

About the A' Design Award na Bronse

Ang Arch Silya, Silyang Walang Sandalan ay nagwagi ng A' Design Award na Bronse, isang lubhang prestihiyosong pagkilalang iginagawad sa mga natatanging disenyong nakikilala sa pagkamalikhain, katalinuhan at talas ng isip. Ang mga nagwagi ng Bronse ay mga likhang lubhang mahusay at kapansin-pansing malikhain na nagpapatunay sa malawak na karanasan, imahinasyon at pagkamaparaan ng kanilang mga tagapagdisenyo. Inaasahang ang Arch Silya, Silyang Walang Sandalan ay isang lubos na pinahahalagahan, hinahangaan at minamahal na bagay na kapansin-pansing propesyonal at makabago. Ang disenyong ito na nagwagi ng A' Design Award na Bronse ay nagsasama ng pinakamahuhusay na kasanayan sa sining, agham, disenyo at teknolohiya, at mahusay dahil sa pansin nito sa detalye. Ang Arch Silya, Silyang Walang Sandalan ay kahanga-hangang tumutugon sa mga pangangailangan, humahaplos sa mga hangarin, bumibighani sa damdamin at umaakit sa pag-uusisa.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Dimensions & Packaging: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Tags: Wood, Chair, Stool, Pine wood, Arches, Curve
Production Technology: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Design Challenge: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Research: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Inspiration: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Project Duration: The project started in march 2020 - and finished in late May 2020.
Operation Flow: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patents: Copyrights belong to Edvard Glazebrook, 2020
Team Members: Edvard Glazebrook