Ang disenyo na The Flett Roof Flashing (Panangga sa Bubong) ni Scott Flett ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2023 A' Design Award na Bakal sa Kategoryang Paligsahan na Disenyo ng mga Pormang 3D Print at Produkto.
Bakal3D Printing· 2023
The Flett Roof Flashing (Panangga sa Bubong)
ni Scott Flett
Kliyente: Scott Flett Architecture Workshop.
Nagwagi ng A' Design Award na Bakal sa Kategoryang 3D Printing
Na-verify na Nagwagi ng Parangal
I-verify ang Katayuan ng Parangal para sa #141650Ang Disenyo
Tungkol sa The Flett Roof Flashing (Panangga sa Bubong)
Ang Flett ay isang panangga sa bubong (roof flashing) na dinisenyo para sa standing seam architectural cladding. Ang panangga ay ginawa sa pamamagitan ng 3D printing gamit ang ASA plastic, may sukat na 265 by 50 by 100 milimetro at 2 milimetro ang kapal. Ang hugis nito ay pumapasok sa ilalim ng isang cladding sheet, nagpapahintulot ng pagbabago sa direksyon, at pagkatapos ay pumapatong naman sa susunod na sheet. Ang parte ay tumutugma sa profile at kulay ng roofing sheet, at ang materyal ay thermally stable, UV stable, at nontoxic. Ang panangga ay maaaring i-install nang sunud-sunod ng mga karaniwang manggagawa (general trades), at naglalayong mabawasan ang mga pagtagas sa mahihirap na bahagi ng pagdugtong ng bubong.
Ang Pagkilala
Tungkol sa A' Design Award na Bakal
Ang The Flett Roof Flashing (Panangga sa Bubong) ay nagwagi ng A' Design Award na Bakal, isang prestihiyosong pagkilalang iginagawad sa mga mahuhusay na disenyong tumutugon sa mga propesyonal at pang-industriyang kinakailangang inaasahan sa mga mahusay na pagkakadisenyong likha. Ang mga nagwagi ng Bakal ay nagpapakita ng dakilang husay, mataas na espesyalisasyon, dalubhasang pag-unawa at kakayahang malikhain ng kanilang mga lumikha. Inaasahang ang The Flett Roof Flashing (Panangga sa Bubong) ay isang lubos na pinahahalagahan, hinahangaan at minamahal na likhang praktikal at makabago. Ang disenyong ito na nagwagi ng A' Design Award na Bakal ay nagsasama ng pinakamahuhusay na kasanayan ng industriya at may mahuhusay na katangiang teknikal na may kasamang kaalaman at talento. Ang The Flett Roof Flashing (Panangga sa Bubong) ay iginagalang dahil sa kaingatan nito at idinisenyo upang maghatid ng mga pagpapabuti sa kalidad ng buhay na tumutulong gawing mas mabuting lugar ang mundo.
Sa Likod ng Disenyo
Press Kit
Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.
- Mga Natatanging Katangian
- The Flett Flashing is the world’s first 3D printed roof flashing. 3D printing allows the flashing to perfectly match any specified roofing profile and colour and permits junctions between roofing sheets of different pitches to be installed without difficulty. This invention makes architectural cladding quicker, easier and cheaper to install and represents a step change for the roofing and cladding industry.
- Mga Sukat at Packaging
- 265mm x 50mm x 100mm
2mm thick ASA plastic, color matched to roofing profile. - Mga Tag
- roof, flashing, roof flashing, 3d print, 3d printing, additive forming
- Teknolohiya sa Produksyon
- The Flett flashing is produced with 3d printing or additive forming.
I designed a mold that under-laps the sectional profile of standing seam cladding sheet, permits any change in direction and then overlaps the sectional profile of an subsequent sheet.
I developed an additive manufacturing process that consistently produces a robust product that is thermally stable, UV stable, nontoxic and color matched to the roofing sheet.
I developed an installation method that allows the sheets to be installed in sequence and quickly. The installed product looks clean, simple and aesthetically consistent. - Hamon sa Disenyo
- Architectural Cladding is installed by specialist trade personnel. This generally requires decades of experience, is time consuming and as a consequent is expensive. This often leads to architectural cladding being priced out of commerciality. With the Flett Flashing, this can be installed by carpenters, builders or other trades without the requirement of a specialist trade.
- Pananaliksik
- The Flett Flashing aspires to catalyse a global rethink of roof design.
The world has only modestly changed the way it designs roofs since the invention of corrugated iron in 1829.
Roofs are at the very essence of shelter. Our shelter, and built environment as a whole, needs to respond to its environment.
This is particularly applicable in Australia, where the homes are still often styled on European and American homes. Australia deserves to have a roof design that suits its conditions.
The Flett Flashing is this Australian design. It not only gives greater creative options to architects and better solutions for builders but it also responds to our unique environmental challenges, and way of life.
Everyone knows someone whose roof has leaked. It is one of the most common building defects and even minor damage causes an immense financial burden. The Flett Flashing aims to prevent this problem. - Inspirasyon
- Traditional Metal Roofing or Architectural Cladding continues to be an enduring method of cladding throughout the world. One of the design challenges of using architectural cladding is how to resolve junctions. The issue is that each standing seam panel is asymmetrical and must be installed in sequence. There is currently no product on the market for architectural cladding that facilitates a quick change in direction. This has been done by hand for hundreds of years. The design challenge is to create a durable and aesthetically pleasing flashing suitable for standing seam cladding that is quick and easy to install.
- Tagal ng Proyekto
- The project started on January 2017 and is ongoing.
The Flett Flashing has been installed on a house that I built in Hobart, Tasmania.
The Flett flashing is a derivative of 4 years of relentless design iterations and constant printing. The form is the result of over 1000 days of improvement.
I am continuing the commercialisation of this invention in Sydney at the UNSW start up hub: 'Founders'. - Daloy ng Operasyon
- I hope to inspire the world to improve roof design.
I am the first architect in the world to have designed a 3d printed roof flashing. I am also the first builder in the world to have manufactured and installed a 3d printed roof flashing.
I have shown that architects can have more design options and builders have more solutions. I have demonstrated that 3d printing belongs in the collective site toolbox.
Australia, and the world, has a problem with leaking roofs. Difficult junctions and poor roof design are the leading causes of roof leaks. My design addresses this problem.
The Flett Flashing can be tailored to suit multiple profiles, responding to design requirements of its local environment, enabling application to a wide range of locations. - Mga Patent
- Patented. Patent No 2020314005. Year 2020. Australia
Trademark: 2022. Scott Flett Architecture Workshop
Flett: Australian Trade Mark Registration No. 2217228
The Flett Flashing: Registered Design 201915882
Australian Patent: 2020314005
PCT/AU2020/050728 - Mga Miyembro ng Koponan
- Scott Flett
- Mga Credit ng Larawan
- Video Credits: Chris Shurman and Charles Whittington
Image Credits: Chris Shurman and Mark Lobo
Naka-sponsor
Tuklasin ang Higit Pa sa Designers.org
Tuklasin ang mga produkto, serbisyo at oportunidad mula sa aming mga kasosyo sa advertising.
Higit Pang Tuklasin
Mga Kaugnay na Disenyo
Tuklasin ang higit pang mga award-winning na disenyo mula sa parehong kategorya, pinili ayon sa merito.
