Ang disenyo na Bend Ang Coffee Table ni Jan Goderis ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2023 A' Design Award na Bronse sa Kategoryang Paligsahan na Disenyo ng Muwebles.

BronseMuwebles· 2023

Bend Ang Coffee Table

ni Jan Goderis

Nagwagi ng A' Design Award na Bronse sa Kategoryang Muwebles

15,033

Na-verify na Nagwagi ng Parangal

I-verify ang Katayuan ng Parangal para sa #148865

Bisitahin ang Site Tingnan sa A' Design Award Press Release Badge ng Parangal

Mga Kulay

Ang Disenyo

Tungkol sa Bend Ang Coffee Table

Ang mesa ay gawa sa dalawang baluktot na aluminum plate na magkasya. Kapag pinagsama, ang mga plato ay umaabot hanggang sa mga binti. Nagbibigay ito ng tiyak na transparency at liwanag sa disenyo at ang patayong imbakan ay ginawa para sa mga magazine, pahayagan, at plaid. Sa pagitan ng dalawang tuktok na plato, mayroon ding posibilidad ng pag-iimbak sa magkabilang panig ng mesa.

Ang Pagkilala

Tungkol sa A' Design Award na Bronse

Ang Bend Ang Coffee Table ay nagwagi ng A' Design Award na Bronse, isang lubhang prestihiyosong pagkilalang iginagawad sa mga natatanging disenyong nakikilala sa pagkamalikhain, katalinuhan at talas ng isip. Ang mga nagwagi ng Bronse ay mga likhang lubhang mahusay at kapansin-pansing malikhain na nagpapatunay sa malawak na karanasan, imahinasyon at pagkamaparaan ng kanilang mga tagapagdisenyo. Inaasahang ang Bend Ang Coffee Table ay isang lubos na pinahahalagahan, hinahangaan at minamahal na bagay na kapansin-pansing propesyonal at makabago. Ang disenyong ito na nagwagi ng A' Design Award na Bronse ay nagsasama ng pinakamahuhusay na kasanayan sa sining, agham, disenyo at teknolohiya, at mahusay dahil sa pansin nito sa detalye. Ang Bend Ang Coffee Table ay kahanga-hangang tumutugon sa mga pangangailangan, humahaplos sa mga hangarin, bumibighani sa damdamin at umaakit sa pag-uusisa.

Sa Likod ng Disenyo

Press Kit

Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.

Mga Natatanging Katangian: The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
Mga Sukat at Packaging: Dimensions: 125 x 55 x 28 cm
Mga Tag: coffee table, folded table, ecological design, functional design, minimal design
Teknolohiya sa Produksyon: Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
Hamon sa Disenyo: The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
Pananaliksik: The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
Inspirasyon: The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
Tagal ng Proyekto: The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
Daloy ng Operasyon: The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
Mga Patent: e-depot: 000595853
Mga Miyembro ng Koponan: Jan Goderis
Mga Credit ng Larawan: #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022