C3 Sterilization Lababo ng Kusina ni Nuomi

Ang disenyo na C3 Sterilization Lababo ng Kusina ni Nuomi ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2025 A' Design Award na Pilak sa Kategoryang Paligsahan na Disenyo ng Muwebles, Kagamitan at Kabit sa Kusina.

PilakMuwebles sa Kusina· 2025

C3 Sterilization Lababo ng Kusina

ni Nuomi

Kliyente: Guangdong Nuomi Home Intelligent Technology Co.,Ltd

Nagwagi ng A' Design Award na Pilak sa Kategoryang Muwebles sa Kusina

48,693

Na-verify na Nagwagi ng Parangal

I-verify ang Katayuan ng Parangal para sa #172108

Tingnan sa A' Design Award Press Release Badge ng Parangal

Mga Kulay

Ang Disenyo

Tungkol sa C3 Sterilization Lababo ng Kusina

Ang C3 Sterilization ay isang lababo ng kusina na may kasamang integrated na pangangalaga sa cutting board. Ang built-in na compartment nito ay gumagamit ng ultraviolet light at mainit na sirkulasyon ng hangin upang i-sterilize at patuyuin ang cutting board sa loob ng 15 minuto. Awtomatikong nagsisimula ang proseso ng pangangalaga kapag inilagay ang cutting board sa loob, at ipinapakita ng isang sensor light strip ang katayuan ng operasyon. Ang mga panloob na dingding ay may nano hydrophobic coating para sa resistensya sa gasgas at self-cleaning, at ang drainage pipe ay may antibacterial na silver ion layer. Ang vertical na disenyo ng imbakan na may magnetic na sabitan ng kutsilyo ay nakakatipid ng espasyo sa mga maliliit na kusina.

Ang Pagkilala

Tungkol sa A' Design Award na Pilak

Ang C3 Sterilization Lababo ng Kusina ay nagwagi ng A' Design Award na Pilak, isang pambihirang prestihiyosong pagkilalang iginagawad sa mga disenyong nasa pinakamataas na antas, nakabibighani at kahanga-hanga. Ang mga nagwagi ng Pilak ay mga likhang lubhang makinang at napakamalikhain na naglalarawan sa pambihirang kadalubhasaan, talento at talas ng isip ng kanilang mga tagapagdisenyo. Inaasahang ang C3 Sterilization Lababo ng Kusina ay isang kahanga-hangang likhang huwaran na kapansin-pansing propesyonal at malalim na makabago. Ang disenyong ito na nagwagi ng A' Design Award na Pilak ay isang lubhang kapansin-pansin at hinahangaang imbensyon na nakikinabang at nagpapaunlad sa mga hangganan ng sining, agham, disenyo at teknolohiya. Ang C3 Sterilization Lababo ng Kusina ay isang likhang labis na kinaiinggitan na gumigising ng mga hangarin, nagdadala ng positibong damdamin at nagpapasiklab ng pagkamangha at pagkabighani.

Sa Likod ng Disenyo

Press Kit

Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.

Mga Natatanging Katangian: The C3 sterilization sink, centering around the concept of an integrated healthy kitchen, innovatively incorporates cutting board care features, with the whole care process completed in 15 minutes. UV radiation and hot air circulation for cutting board sterilization, coupled with an integrated compartment and an innovative nano hydrophobic coating, enable the product to address single functionality of traditional sinks, bacterial growth of cutting boards, and poor space utilization of kitchens.
Mga Sukat at Packaging: 780*482*220mm
Mga Tag: integrated healthy kitchen, sink with cutting board care features, cleaning, drying and sterilization, integrated compartment, auto start or stop, storage, safety, hygiene
Teknolohiya sa Produksyon: The inner walls of the sink and the compartment are made of a GB 4806.9 material, and employ a nano hydrophobic coating with a contact angle of 110 degrees, achieving scratch resistant and self cleaning properties. The drainage pipe coated with an antibacterial silver ion layer kills 99.9 percent of bacteria. The fully sealed circuit system boasts an IPX7 waterproof rating, complemented by a UV lamp monitor that automatically alerts users after 6,000 hours of use, ensuring safety and durability.
Hamon sa Disenyo: The challenge was how to satisfy the demand of users for a hygienic, efficient kitchen. To address that, the C3 sterilization sink is equipped with dual sterilization units, including UV radiation and hot air circulation, allowing for efficient sterilization with low energy consumption. An integrated compartment supports cutting board care and knife storage to effectively simplify operation for users. The application of a multimodal sensor enables precise recognition for auto start or stop.
Pananaliksik: In the post pandemic era, consumers pay more attention to kitchen health, and increasing small sized residences stimulate the demand for space integration. However, traditional independent sinks and sterilizers fail to meet the requirements of modern kitchens in efficiency, health, and tidiness. The C3 sterilization sink actively responds to upgraded health awareness and more compact living spaces in modern society through technological integration and spatial optimization.
Inspirasyon: It was found that the bacteria levels of cutting boards in 70% of households exceed safe limits. This sink integrates medical grade sterilization technology and a miniaturized drying unit. Moreover, it draws on vertical storage design from Japanese kitchens to optimize spatial utilization, while also supporting auto start or stop and incorporating a magnetic knife rack. This product enables professional sterilization in home settings, creating a healthy, efficient, and tidy kitchen ecosystem.
Tagal ng Proyekto: The project started in Guangdong in April, 2023 and finished in August, 2024. The product was launched in China in September, 2024.
Daloy ng Operasyon: UV radiation and hot air circulation automatically start once the cutting board is placed into the compartment, with the whole care process completed in 15 minutes without any manual operation.
A smart sensor light strip indicates the working status, and the UV unit is linked with the door switch to ensure safety during sterilization.
A vertical storage design, paired with a magnetic knife rack, allows users to smoothly access and store knives, significantly enhancing efficiency.