Xpan 2 Pangunahing Gamit: Botang Pang-trabaho by Francis Lacroix is a highly esteemed winner of the very prestigious 2026 A' Design Award na Ginto in Disenyo ng Damit Pangkaligtasan at Kagamitang Pangprotekta Competition Category.
GintoKagamitang Pangprotekta· 2026
Xpan 2 Pangunahing Gamit: Botang Pang-trabaho
Client: Royer
A' Design Award na Ginto Winner in Kagamitang Pangprotekta Category
- 34,711
- Verified Award Winner
- Verify Award Status for #182031
The Design
About Xpan 2 Pangunahing Gamit: Botang Pang-trabaho
Teksto ng Aklat: Ang botang Xpan 2.0 ay nagtatampok ng makabagong arkitektura ng suwelas na binuo para sa matinding kapaligiran ng metalurhiya, kung saan kailangang magsama ang proteksyon laban sa init at magaan na pagganap. Ang makabagong suwelas nito ay lumalaban sa init, pagkadulas, at gasgas sa mataas na panganib na industriyal na kapaligiran. Isang balat na goma na matibay laban sa init at apoy ang bumabalot sa gitnang suwelas na polyurethane, na bumubuo ng integradong hadlang sa init nang hindi isinasakripisyo ang pagsipsip ng suntok o nagdadagdag ng bigat. Ang resulta ay nagtatakda ng bagong pamantayan sa pang-kaligtasang sapatos laban sa tunaw na metal.
The Recognition
About the A' Design Award na Ginto
Ang Xpan 2 Pangunahing Gamit: Botang Pang-trabaho ay nagwagi ng A' Design Award na Ginto, isang napakaprestihiyosong pagkilalang iginagawad sa mga disenyong pangunahing-uri, kahanga-hanga at namumukod-tangi. Ang mga nagwagi ng Ginto ay mga likhang lubhang makabago, may pananaw at nakasisilaw sa karilagan na sumasalamin sa talino, karunungan at husay ng kanilang mga tagapagdisenyo. Inaasahang ang Xpan 2 Pangunahing Gamit: Botang Pang-trabaho ay isang lubos na pinupuri, nagtatakda-ng-uso at monumental na imbensyon na naghahatid ng walang kapantay na halaga. Ang disenyong ito na nagwagi ng A' Design Award na Ginto ay isang kahanga-hanga at iginagalang na proyekto na lubos na nakikinabang at nagpapaunlad sa mga hangganan ng sining, agham, disenyo at teknolohiya. Ang Xpan 2 Pangunahing Gamit: Botang Pang-trabaho ay lumilikha ng matinding damdamin ng pagnanais, gumigising ng damdamin, nagpapasigla ng pagkamalikhain at nakahuhumaling sa atin.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The sole is designed in a way to encapsulate the quasi-totality of the polyurethane midsole by the heat and flame resistant rubber outsole leaving only a slight contour. Thus, offering a lighter and highly shock absorbing sole all the while providing maximal foot protection and durability.
- Dimensions & Packaging
- A US size 9.0 (42 EU) pair has an approximate height of 200 mm and is built on an ergonomic shoelast designed to closely follow the natural morphology of the foot, ensuring fit precision and comfort. Each pair is packaged in a rectangular box measuring approximately 200 x 200 x 100 mm. The packaging, made from recycled and recyclable cardboard, protects the product from factory to end user.
- Tags
- Work boot, Safety boot, Cold Weather Protection, outsole technology, extreme job sites, Metatarsal Protection, Industrial Design
- Production Technology
- The design process began with exploratory hand sketches to define proportions, functional zones and visual identity. Concepts were refined using Adobe Creative Suite (Illustrator and Photoshop) to develop precise renderings and material simulations. A detailed technical drawing was then produced to guide tooling and upper manufacturing. A comprehensive tech pack ensured accurate translation of design intent into production.
- Design Challenge
- The most complex challenge was achieving resistance to molten metal, particularly full immersion in liquid aluminum exceeding 1,000°C. Aluminum’s very low viscosity allows rapid penetration, making material selection and upper construction highly critical. The difficulty was intensified by bonding the upper to a rubber outsole through polyurethane injection, a material sensitive to heat above 150°C. Balancing extreme thermal protection with manufacturability required extensive experimentation and process control.
- Research
- Type of Research: Experimental product R&D following a five-phase Stage-Gate methodology. Research Objectives: Improve protection, comfort, and durability in molten metal environments. Methodology: Define measurable performance criteria and validate materials against them. Data Collection and Tools: Iterative lab testing on weight, slip resistance, molten metal splash and aluminum bath immersion. Participants: Internal R&D and manufacturing teams. Results: Measurable gains across all parameters. Insights and Impacts: Enhanced safety standards, industrial reliability, and long-term value for high-risk metal processing sectors.
- Inspiration
- The sole design draws inspiration from the aerodynamic geometry of the CF-105 Arrow developed by Avro Canada. Its triangular wing structure and directional arrow motifs informed the tread’s dynamic chevron pattern, engineered to enhance forward traction and stability. The project merges aerospace precision with industrial safety research, translating principles of thrust, grip, and structural resilience into a high-performance work boot outsole.
- Project Duration
- The project started in January 2023 in Sherbrooke, Quebec, Canada, and was completed in December 2025. The three-year development cycle included the Definition, Design, Prototyping, and Production Implementation phases. The product was officially launched in January 2026. A continuous Monitoring and Feedback phase has been ongoing since market introduction to ensure long-term performance optimization.
- Operation Flow
- The Xpan 2.0 boot improves upon previous generations in every critical aspect. It offers higher resistance to molten metal splash, enhanced slip protection on certified test surfaces, reduced weight, improved ergonomic fit, and greater durability against abrasion and tearing. Each performance parameter was tested and validated, demonstrating measurable progress over the previous model, already recognized as a global benchmark in primary and secondary metal processing environments.
- Team Members
- Sponsor: Simon La Rochelle
Innovation Director: Francis Lacroix
Product Developer: Vincent Blais
Project Manager: Elyzabeth Bouchard
Operations Director: Etienne Sirois
Production Technician: Brittaney La Penna
Production Technician: Simon Turk
Technical Partner: Benedetto Scarnera (SFB Srl)
Technical Partner: Felice Scarnera (SFB Srl)
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
