Bronz 3B Baskı · 2021
DefeXtiles Tekstil Üretim Tekniği
by Jack Forman
- A' Design Award Bronz Ödülü 2021 in 3B Baskı
- CLIENT: Tangible Media Group, MIT Media Lab
- Estimated Number of Design Views: 33,223
- Verification code 24A063C584 · Verify this award
Colors
About DefeXtiles Tekstil Üretim Tekniği
DefeXtiles, standart 3D yazıcılarda ince ve esnek tekstiller üretmeye yarayan bir tekniktir. Yöntem, eksik ekstrüzyonu denetleyerek aralarında ince iplikçikler bulunan küçük topakların oluşmasını sağlar. Ortaya çıkan periyodik boşluklar, basılan kumaşa polilaktik asit gibi rijit malzemelerle bile tekstil benzeri bir görünüm, nefes alabilirlik, esneklik ve gerilebilirlik kazandırır. Tekstiller baskı tablasına dik olarak üretildiğinden pileli ve kavisli formlar oluşturulabilir. Uygulama alanları arasında giysiler, dokunsal arayüzler ve badminton topları yer alır. İletken filament kullanılarak kumaşın içine devre yolları gömülebilir.
About the A' Design Award Bronz Ödülü
DefeXtiles Tekstil Üretim Tekniği, A' Design Award Bronz Ödülü kazananıdır; bu, yaratıcılık, buluş gücü ve kurnazlıkla öne çıkan olağanüstü tasarımlara verilen son derece prestijli bir tanınırlıktır. Bronz kazananlar, tasarımcılarının engin deneyimini, hayal gücünü ve becerikliliğini doğrulayan fazlasıyla yetenekli ve çarpıcı biçimde yaratıcı nesnelerdir. DefeXtiles Tekstil Üretim Tekniği, çok itibar gören, hayranlıkla izlenen ve sevilen, dikkat çekici derecede profesyonel ve yenilikçi bir nesne olması beklenir. A' Design Award Bronz Ödülü kazanan bu tasarım, sanat, bilim, tasarım ve teknolojideki en iyi uygulamaları bünyesinde barındırır ve ayrıntıya gösterdiği özenle mükemmeldir. DefeXtiles Tekstil Üretim Tekniği ihtiyaçları muhteşem biçimde karşılar, arzulara dokunur, duyguları büyüler ve merakı çeker.
Press Kit
- Unique Properties
- DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
- Tags
- textile, 3d print, lace, advanced manufacturing, fabric
- Production Technology
- In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
- Design Challenge
- To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
- Research
- We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
- Inspiration
- For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
- Project Duration
- Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
- Operation Flow
- This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
