C3 Sterilization Mutfak Evyesi by Nuomi is a highly esteemed winner of the very prestigious 2025 A' Design Award Gümüş Ödülü in Mutfak Mobilyası, Ekipmanı ve Armatürleri Tasarımı Competition Category.

GümüşMutfak Mobilyası· 2025

C3 Sterilization Mutfak Evyesi

by Nuomi

Client: Guangdong Nuomi Home Intelligent Technology Co.,Ltd

A' Design Award Gümüş Ödülü Winner in Mutfak Mobilyası Category

46,412
Verified Award Winner
Verify Award Status for #172108

View at A' Design Award Press Release Award Badge

Colors

The Design

About C3 Sterilization Mutfak Evyesi

C3 Sterilization, entegre kesme tahtası bakımı sunan bir mutfak evyesidir. Gömme bir bölme, ultraviyole ışık ve sıcak hava sirkülasyonu kullanarak kesme tahtasını 15 dakikada sterilize edip kurutur. Bakım süreci, kesme tahtası içeri yerleştirildiğinde otomatik olarak başlar ve bir sensörlü ışık şeridi çalışma durumunu gösterir. İç duvarlar, çizilmelere karşı direnç ve kendi kendini temizleme özelliği sağlayan nano hidrofobik bir kaplamaya sahiptir; tahliye borusu ise antibakteriyel gümüş iyon katmanıyla donatılmıştır. Manyetik bıçaklık içeren dikey saklama tasarımı, kompakt mutfaklarda yerden tasarruf sağlar.

The Recognition

About the A' Design Award Gümüş Ödülü

C3 Sterilization Mutfak Evyesi, A' Design Award Gümüş Ödülü kazananıdır; bu, göz alıcı, yüce ve etkileyici birinci sınıf tasarımlara verilen olağanüstü prestijli bir tanınırlıktır. Gümüş kazananlar, tasarımcılarının olağanüstü uzmanlığını, yeteneğini ve keskin zekasını gösteren son derece parlak ve çok yaratıcı eserlerdir. C3 Sterilization Mutfak Evyesi, harika, örnek gösterilen, dikkat çekici derecede profesyonel ve derinlemesine yenilikçi bir eser olması beklenir. A' Design Award Gümüş Ödülü kazanan bu tasarım, sanat, bilim, tasarım ve teknolojinin sınırlarına fayda sağlayan ve onları ilerleten oldukça dikkat çekici, beğenilen bir buluştur. C3 Sterilization Mutfak Evyesi, büyük kıskançlıkla bakılan, arzuları uyandıran, olumlu duygular getiren ve şaşkınlık ve hayranlık uyandıran bir yaratımdır.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: The C3 sterilization sink, centering around the concept of an integrated healthy kitchen, innovatively incorporates cutting board care features, with the whole care process completed in 15 minutes. UV radiation and hot air circulation for cutting board sterilization, coupled with an integrated compartment and an innovative nano hydrophobic coating, enable the product to address single functionality of traditional sinks, bacterial growth of cutting boards, and poor space utilization of kitchens.
Dimensions & Packaging: 780*482*220mm
Tags: integrated healthy kitchen, sink with cutting board care features, cleaning, drying and sterilization, integrated compartment, auto start or stop, storage, safety, hygiene
Production Technology: The inner walls of the sink and the compartment are made of a GB 4806.9 material, and employ a nano hydrophobic coating with a contact angle of 110 degrees, achieving scratch resistant and self cleaning properties. The drainage pipe coated with an antibacterial silver ion layer kills 99.9 percent of bacteria. The fully sealed circuit system boasts an IPX7 waterproof rating, complemented by a UV lamp monitor that automatically alerts users after 6,000 hours of use, ensuring safety and durability.
Design Challenge: The challenge was how to satisfy the demand of users for a hygienic, efficient kitchen. To address that, the C3 sterilization sink is equipped with dual sterilization units, including UV radiation and hot air circulation, allowing for efficient sterilization with low energy consumption. An integrated compartment supports cutting board care and knife storage to effectively simplify operation for users. The application of a multimodal sensor enables precise recognition for auto start or stop.
Research: In the post pandemic era, consumers pay more attention to kitchen health, and increasing small sized residences stimulate the demand for space integration. However, traditional independent sinks and sterilizers fail to meet the requirements of modern kitchens in efficiency, health, and tidiness. The C3 sterilization sink actively responds to upgraded health awareness and more compact living spaces in modern society through technological integration and spatial optimization.
Inspiration: It was found that the bacteria levels of cutting boards in 70% of households exceed safe limits. This sink integrates medical grade sterilization technology and a miniaturized drying unit. Moreover, it draws on vertical storage design from Japanese kitchens to optimize spatial utilization, while also supporting auto start or stop and incorporating a magnetic knife rack. This product enables professional sterilization in home settings, creating a healthy, efficient, and tidy kitchen ecosystem.
Project Duration: The project started in Guangdong in April, 2023 and finished in August, 2024. The product was launched in China in September, 2024.
Operation Flow: UV radiation and hot air circulation automatically start once the cutting board is placed into the compartment, with the whole care process completed in 15 minutes without any manual operation.
A smart sensor light strip indicates the working status, and the UV unit is linked with the door switch to ensure safety during sterilization.
A vertical storage design, paired with a magnetic knife rack, allows users to smoothly access and store knives, significantly enhancing efficiency.