Vincent Blais tarafından tasarlanan Fortex İş Botu

Vincent Blais tarafından tasarlanan Fortex İş Botu, Güvenlik Giysileri ve Kişisel Koruyucu Ekipman Tasarımı Yarışma Kategorisinde son derece prestijli 2026 A' Design Award Gümüş Ödülü ödülünün saygın bir kazananıdır.

GümüşKoruyucu Ekipman· 2026

Fortex İş Botu

tasarımcı: Vincent Blais

Müşteri: Royer

Koruyucu Ekipman Kategorisinde A' Design Award Gümüş Ödülü Kazananı

21,380

Doğrulanmış Ödül Kazananı

#182037 için Ödül Durumunu Doğrula

Siteyi Ziyaret Et A' Design Award'da Görüntüle Basın Bülteni Ödül Rozeti

Renkler

Tasarım

Fortex İş Botu Hakkında

Fortex, kimyasal maruziyet, darbe tehlikeleri ve mekanik gerilim içeren yüksek riskli endüstriyel ortamlar için tasarlanmış su geçirmez bir güvenlik botudur. Yeniliği, termoplastik poliüretan bileşenleri enjeksiyonlu bir poliüretan tabanla birleştirerek yapıştırıcı kullanmadan bütünleşik bir yapı oluşturan kimyasal ortak kalıplama sürecidir. Entegre unsurlar arasında bir metatarsal koruyucu, yanal ayak bileği koruması ve takviyeli bir topuk desteği bulunur. Tasarım; suya, kimyasallara, hidrokarbonlara, delinmeye ve kaymaya karşı direnç sağlarken hafif, ergonomik ve termal açıdan verimli kalmaktadır.

Tanınırlık

A' Design Award Gümüş Ödülü Hakkında

Fortex İş Botu, A' Design Award Gümüş Ödülü kazananıdır; bu, göz alıcı, yüce ve etkileyici birinci sınıf tasarımlara verilen olağanüstü prestijli bir tanınırlıktır. Gümüş kazananlar, tasarımcılarının olağanüstü uzmanlığını, yeteneğini ve keskin zekasını gösteren son derece parlak ve çok yaratıcı eserlerdir. Fortex İş Botu, harika, örnek gösterilen, dikkat çekici derecede profesyonel ve derinlemesine yenilikçi bir eser olması beklenir. A' Design Award Gümüş Ödülü kazanan bu tasarım, sanat, bilim, tasarım ve teknolojinin sınırlarına fayda sağlayan ve onları ilerleten oldukça dikkat çekici, beğenilen bir buluştur. Fortex İş Botu, büyük kıskançlıkla bakılan, arzuları uyandıran, olumlu duygular getiren ve şaşkınlık ve hayranlık uyandıran bir yaratımdır.

Tasarımın Perde Arkası

Basın Kiti

Tasarımcı tarafından sağlanan jenerik, ekip üyeleri ve teknik detaylar.

Benzersiz Özellikler: Engineered to redefine industrial performance, this boot features a quad-density co-injection system fusing PU and TPU into one seamless chassis. Anatomically mapped zones deliver lightweight shock absorption and targeted protection at key impact areas. A rigid heel stabilizes the foot on uneven terrain, while specialized outsoles ensure grip in extreme conditions. Cement-free bonding forms a waterproof, monolithic structure built for lasting durability and safety.
Boyutlar ve Ambalaj: Product Dimensions (1 boot, size 42): 310 mm x 120 mm x 400 mm (height)
Package: 510 mm x 355 mm x 140 mm
Etiketler: Co-injected Footwear, TPU Reinforcement, Polyurethane Safety Boot, Cold Weather Protection, Ankle protection, Metatarsal Protection, Industrial Design, Injection Molding Innovation, Chemical Bonding, Work Boot
Üretim Teknolojisi: This safety boot is engineered through co-injection molding, chemically bonding high-density TPU reinforcement with a lightweight PU core to form a seamless, monolithic structure free from adhesives and delamination. Developed for sub-zero climates, the TPU formulation maintains elasticity at -40°C, ensuring impact resistance without brittleness. Precision tooling guarantees exact reinforcement placement, delivering targeted protection, thermal stability, and durability without added bulk.
Tasarım Zorluğu: The principal challenge was achieving reliable co-molding between TPU and a PU base, ensuring sufficient bonding strength in the metatarsal insert located within the boot’s primary flex zone. This required rethinking rotary-injection machine & tooling: a system allowing a pre-molded TPU insert to seat in an articulated receiver moving in frontal-transverse planes before mold closure and PU injection. Constraints included production feasibility, material behavior, wearer comfort and international safety standard requirements.
Araştırma: This applied industrial research explored polymer chemistry and precision engineering to eliminate adhesion failure and cold embrittlement in safety footwear. Using iterative prototyping and destructive testing, high-density TPU was co-injected with a cellular PU core to form a monolithic structure. Hundreds of bonding and sub-zero wear tests led to a cement-free boot with permanent molecular fusion, zero delamination, and full CSA, ASTM, and EN/ISO compliance.
İlham: This project merges heritage craftsmanship with advanced material science, transforming traditional footwear into an integrated high-performance system with protection embedded in its structural DNA. Inspired by biological exoskeletons, it acts as both protective shell and load-bearing frame. Rib-cage inspired arch geometry in the metatarsal zone disperses impact while preserving flexibility, creating a biomimetic system balancing safety and ergonomic performance.
Proje Süresi: Designing started in Sherbrooke, Quebec, Canada in Dec. 2023. Engineering started in Legnaro, Padova, Italy in September 2024 with GGS, an elite Italian mold-making partner lead by M. Roberto Gobbato.
İşleyiş Akışı: This safety boot functions as a flexible exoskeleton, flexing at the forefoot while stabilizing the heel. TPU reinforcements shield the metatarsal area and ankle from impact without limiting movement. Unlike cemented footwear, its PU and TPU components are co-injected and chemically fused into a single monolithic structure, eliminating delamination. Built for harsh industrial and cold environments, it delivers long-term durability, reliability, and consistent performance.
Patentler: Protective Toecap & Puncture-resistant Sole
(CSA Z195-14) Certified grade 1 protective toecap that withstands impacts up to 125 joules and certified puncture-resistant sole that withstands at least 1200 Newtons (270pounds)

Electric-shock Protection
(CSA Z195-14) Certified electric-shock protection (18 kV / 60 Hz / 1 minute)

Metatarsal Protection
(CSA Z195-14) Certified metatarsal protection that can withstand impacts up to 101.7 joules

Protective Toecap Impact and Compression Resistance
(ASTM F2413-24) Certified protective toecap that can withstand an impact of 75 ft-lbf (~100 Nm) and a compression of 2500lbs (~1135KG).

Puncture-resistant Sole
(ASTM F2413-24) Certified puncture-resistant sole that can withstand a force load of 270 lbf (1200 N)

Metatarsal Protection
(ASTM F2413-24) Certified metatarsal protection that can withstand an impact of 75 ft-lbf (~100 Nm)

Electric Hazard Protection
(ASTM F2413-24) Certified electric-shock protection (18 kV/ 60 Hz / 1 minute)

Slip Resistant Sole
(ASTM F2413-24) Certified slip-resistant footwear with a coefficient of friction (CoF) of no less than 0.40 on dry and wet quarry tile
Ekip Üyeleri: Footwear Developer/Designer: Vincent Blais
Design Associate: Loïc Girard
Executive Director - Innovation: Francis Lacroix

DEVELOPING PARTNERS:
Equipment and Testing: Felice Scarnera & Benedetto Scarnera from SFB Srl (Italy)
Master Moldmaker: Roberto Gobbato – GGS (Italy)
Material and Chemistry: ELACHEM (Italy)
Int'l team coordinator: Alexandra Dombrovska (Italy)