Additive Implants Inc. tarafından tasarlanan SureMAX Servikal Omurga İmplantı

Additive Implants Inc. tarafından tasarlanan SureMAX Servikal Omurga İmplantı, Tıbbi Ürün Tasarımı Yarışma Kategorisinde son derece prestijli 2020 A' Design Award Bronz Ödülü ödülünün saygın bir kazananıdır.

BronzTıbbi Ürün· 2020

SureMAX Servikal Omurga İmplantı

tasarımcı: Additive Implants Inc.

Müşteri: Additive Implants Inc

Tıbbi Ürün Kategorisinde A' Design Award Bronz Ödülü Kazananı

17,790

Doğrulanmış Ödül Kazananı

#88502 için Ödül Durumunu Doğrula

Siteyi Ziyaret Et A' Design Award'da Görüntüle Basın Bülteni Ödül Rozeti

Renkler

Tasarım

SureMAX Servikal Omurga İmplantı Hakkında

SureMAX, anterior servikal diskektomi ve füzyon cerrahisinde kullanılan titanyum bir servikal omurga implantıdır. SureMAX'in rijitliği hastanın kemik rijitliğiyle uyumlu hâle getirilmiştir; böylece omur zarar görmez ve implant çökme yapmaz. Kemik titanyumun içine iyi büyür, ancak daha önceki titanyum kafesler fazla rijitti. SureMAX, titanyum tozundan üç boyutlu baskı yöntemiyle üretilir; bu da talaşlı imalatla elde edilemeyecek geometrilere olanak tanır. Yüzey, kemik büyümesini desteklemek üzere gözenekli ve pürüzlendirilmiştir. Yan pencereler, iyileşmenin röntgen görüntülerinde izlenmesini sağlar.

Tanınırlık

A' Design Award Bronz Ödülü Hakkında

SureMAX Servikal Omurga İmplantı, A' Design Award Bronz Ödülü kazananıdır; bu, yaratıcılık, buluş gücü ve kurnazlıkla öne çıkan olağanüstü tasarımlara verilen son derece prestijli bir tanınırlıktır. Bronz kazananlar, tasarımcılarının engin deneyimini, hayal gücünü ve becerikliliğini doğrulayan fazlasıyla yetenekli ve çarpıcı biçimde yaratıcı nesnelerdir. SureMAX Servikal Omurga İmplantı, çok itibar gören, hayranlıkla izlenen ve sevilen, dikkat çekici derecede profesyonel ve yenilikçi bir nesne olması beklenir. A' Design Award Bronz Ödülü kazanan bu tasarım, sanat, bilim, tasarım ve teknolojideki en iyi uygulamaları bünyesinde barındırır ve ayrıntıya gösterdiği özenle mükemmeldir. SureMAX Servikal Omurga İmplantı ihtiyaçları muhteşem biçimde karşılar, arzulara dokunur, duyguları büyüler ve merakı çeker.

Tasarımın Perde Arkası

Basın Kiti

Tasarımcı tarafından sağlanan jenerik, ekip üyeleri ve teknik detaylar.

Benzersiz Özellikler: SureMAX is the first Titanium spinal implant that has a stiffness that matches the individual's bone stiffness as not to damage it. Bone loves to grow into Titanium but Titanium cages have been limited because they are too stiff and damage the bone. SureMAX has solved this problem through using 3D print technology with geometries that are not machinable. It also has a porous roughen surface to encourage bone to grow into it.
Boyutlar ve Ambalaj: There are 72 sizes for SureMAX. The height, the foot print and the angle of the implant are the 3 choices. The angles are 0, 7 and 14 degrees. The choice of the angle is used to correct any stenosis in the spine (this is when the spine has a deformity and the implant is used to fix it). The heights are 5,6,7,8,9,10,11 and 12 mm. The foot prints are 12x14 mm, 14x16 mm and 15x118mm. All units come in a sterile plastic package.
Etiketler: spinal implant, Inter body fusion device, IBFD, cage, Titanium, Ti Cage, 3D printed, Spine
Üretim Teknolojisi: 3D print technology has been used with Titanium powder (Ti6Al4) using porous surface technology to achieve designs that will encourage bone to grow into the spinal implant
Tasarım Zorluğu: To get result required- a high performance implants which is cost competitive, the team had to design a part that could both hand the stresses and forces required by the US government FDA while solving the patient challenges. The part had to be designed so minimal post processing would be required after 3D printing. Additionally, the rough porous surface which helps the healing process required advance software and new methodologies to manufacture. The diving boards had to share the spinal loads equally in order not to displace the implant in the spine. Side windows had to be designed that permits the loads to be distributed and have large have enough surface to see the bone healing. The hardest part of the design activity was to figure out how 8 independent platforms on both sides of the implant could function as a single unit and share the loads appropriately. The surface had to be porous and roughened Ti that could handle the appropriate loads. The teeth had to be the correct size and angle in order to assure stability, but not too big or small to them a ineffective.
Araştırma: Titanium (Ti) has always been the material of choice for implants. But Ti is hard to machine and is very stiff. In the interface between Ti and bone, bone can be damaged and the implant subside ( or settle ) in the body. Plastic and Allograft bone material implants are used to address Ti's limitations. Additional, Ti is not X-ray translucent, so physicians can not see how the bone heals through and around the implant. Plastic implants also have the limitation that they remain inert in the body- they are never adsorbed. Bone however grows very well into Ti. The challenge was to create a Ti spinal cervical implant (cervical is for the neck) that had the same stiffness as bone as not to damage it, would not subside (it would stay on top of the bone and not settle), would remain in the position inserted (with the neck movement would not slip), X-ray could go through it (healing could be observed), would pass the stress test required by the FDA and would be cost effective.
İlham: The inspiration was the lack of a solution that took advantage of new geometries that can be created with Titanium which is the best material for bone to grow into by a spine surgeon who performs over 300 cervical surgeries a year. He wanted an implant made from Titanium that matched bone's hardness, not to damage the vertebra, was visible in X-rays, so healing could be seen through, and would not subside in the spine.
Proje Süresi: The design started in 2015 and ended in October 2018 and FDA approval was received in February 2019 (3 year design and 4 month approval). The work was done in Phoenix Arizona USA.
İşleyiş Akışı: The implant is used in an Anterior Cervical Discectomy Fusion (ACDF) surgery where the front of the neck is opened, the damaged cartilage removed and an implant is inserted in order to fuse the vertebra. The implant comes in a sterile plastic package. The surgeon once the damage is observed and removed assesses the size required. The appropriate implant size, angle and foot print is selected and inserted into the spine. A plate is then used (not part of SureMAX) to attach the upper and lower vertebra. The bone then grows into the implant (called inter body fusion device IBFD) and the patient heals.
Patentler: Patented #10,299,938 Additive Implants Inc., May 2019, USA
5 additional patent pending and provisional patents
FDA #K182477 (2019), holder Additive Implants Inc. USA
Trademark #88115736 (2018), Additive Implants Inc. USA
Ekip Üyeleri: Dr. John Ehteshami MD
Robert Brosnehan
Matt Zoghi
JD Howell
Jeff Horn
Babak Ehteshami